低速溅射小行星表面采样的动力学仿真

开发了适用于小行星环境的大规模三维离散元程序DEMBody,针对低速射弹溅射表层风化层的小行星采样方案,仿真了相同质量不同形状的射弹在微重力环境下垂直射入颗粒床的过程,研究了溅射物质在采样器中的运动历程及最终收集质量与射弹形状的关系。结果表明,90°锥形射弹的采样效率最高。     

水下巡检蛇形机器人移动单元结构设计及计算

随着经济蓬勃发展,水生农作物市场的需求量不断增长,水域水质检测行业显得日益重要,但人工水质水域检测效率低下,为此设计一套可以搭载检测传感器的水质检测蛇形机器人,以提高检测效率、降低检测成本、减轻人工劳动力度。为适应水下环境,该机器人具备小巧、灵活、机动性能好、转弯灵活、对复杂水域适应能力强、可检测不同深度水质的特点,在此针对机器人的移动单元结构设计及强度校核等问题进行分析,可为以后解决此类问题提供一种验证手段。     

并联机器人运动性能的研究现状及发展趋势

随着并联机器人技术的发展,其运动性能的提升成为了发展需求,指出了研究工作空间和奇异位形的必要性。以研究方法为主线,详细阐述了工作空间和奇异位形的国内外研究现状及特点,进一步提炼出个体的创新思想和面临的共同难题。通过深入分析研究方法的原理,找到了解决共同难题的突破口,同时剖析了研究中的尚存难题。结合未来的发展趋势,从结构综合和理论创新两个方面进行突破,能够为并联机器人的发展提供强劲动力。得出的结论和展望给从事这一领域的研究者们提供了参考。     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

一种小天体旋转参数估计方法

小天体旋转参数是科学数据，也是小天体测绘，着陆导航的基础数据.研究一种在小天体探测接近段过程中使用的基于图像上特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法.该方法首先建立小天体旋转关系模型，表示小天体在相机坐标系中的姿态变化；然后定义小天体旋转的状态方程，推到了扩展卡尔曼滤波器的计算过程.通过对观测图像序列上的特征点跟踪，利用扩展卡尔曼滤波器方法得到小天体旋转轴指向和自转角速度估计.实验中，在仿真相机与小天体相机100 km距离上，分析了相机坐标系小天体坐标系之间的四元数初值，图像上特征点跟踪精度，相机的观测指向等因素对小天体旋转参数估计精度的影响.实验结果表明，提出的基于图像特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法能够得到具有较高精度的估计结果.     

一种柔性空间双臂机器人的协同控制和避障方法

针对柔性空间机械臂在轨服务应用需求，提出一种基于刚体运动与柔性振动相耦合的空间双臂机器人协同控制方法.首先引入空间位姿变量的概念，构造出面向协同控制目标的Jacobian矩阵，建立柔性空间机器人系统的刚柔耦合动力学模型，基于指定的最小距离得到其运动学逆解，并根据系统动量矩守恒关系及系统的Jacobian矩阵，并根据机械臂末端的运动速度,然后采用阻尼最小二乘法得出关节角度，使柔性空间机器人能够有效完成协同控制和空间避障任务，并基于RecurDyn V7R5软件环境验证算法的正确性.最后，基于SolidWorks和ADAMS虚拟样机建立柔性空间机器人系统的立体CAD模型，并结合空间在轨搬运任务进行模拟仿真，柔性空间机器人关节操作和运动轨迹的仿真结果图验证了本文算法的有效性.     

基于深度学习的空间站舱内服务机器人视觉跟踪

为提升舱内跟随服务机器人的任务辅助能力,解决机器人对航天员的视觉跟踪问题,提出了一种基于深度学习和概率模型的人体视觉跟踪算法。利用深度卷积神经网络实现了对穿着多样、姿态任意人体的稳定检测。结合人体检测结果,设计了运动预测概率模型,实现了对指定人员准确、连续的跟踪。算法对包含大多数航天员活动的多个数据集进行了验证。实验结果表明:提出的跟踪算法实现了对穿着多样、姿态任意人体的稳定跟踪,并有效避免了由于穿着相似、遮挡可能造成的误跟踪问题。该算法为空间站舱内跟随服务机器人对航天员的视觉跟踪提供了有效的解决方法。算法基于融合的RGB-D图像,工程上易于构建和实现,也可拓展到其他跟随服务机器人视觉跟踪任务中。     

翻转课堂融入线上教学的应用探索——以“Photoshop图像处理”课程为例

在新的教学环境下,开展翻转课堂教学面临着巨大的挑战。结合教学实践,分析实施翻转课堂教学存在的问题,在教学设计、教学形式和教学评价等方面提出相应的对策。大部分学生对翻转课堂内容及形式总体满意,但课程设计方面存在一些不足,需在教学实践中不断完善。     

基于避障伪距离的自由漂浮空间机器人规划跟踪一体化控制

针对自由漂浮空间机器人(Free Floating Space Robot,FFSR)的避障规划与控制问题，提出一种FFSR的避障规划-跟踪一体化控制方法。首先，基于障碍物伪距离技术，采用FFSR逆几何模型求解期望末端位姿下的连杆伪距离估计值，进而通过求解非线性优化问题，获得FFSR避障期望轨迹。其次，将全局轨迹规划与局部在线避障相结合，辅以离散状态黎卡提方程（DSDRE）控制方法实现FFSR的避障规划-跟踪一体化控制。最后，采用6R空间机器人模型验证了所提方法的有效性。仿真结果表明，该方法能够实现FFSR的避障控制，有效克服了传统FFSR控制中末端轨迹规划与控制相分离的问题，提高了FFSR的环境适应性。     

Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.