波音737-800飞机起飞性能随襟翼放出量的变化特点

波音737飞机与其他民用机型的一个不同之处是前缘缝翼在起飞时可以使用开缝状态。分析了波音737-800飞机下列四个起飞性能参数与襟翼放出量的关系:场地长度限制的最大起飞重量;爬升梯度限制的最大起飞重量;障碍物限制的最大起飞重量;起飞决断速度。结果显示这四个参数在襟翼放出量为10时出现异常,原因是前缘缝翼状态发生了变化。在襟翼放出量由5增大到10的过程中,前缘缝翼由不开缝的放出状态变成开缝的完全放出状态,降低了升力系数。     

现代民机新型灭火剂性能研究

对新型灭火剂研究背景和种类进行了简要介绍,对具有开发潜力的新型灭火剂的理化性能、毒性、腐蚀性、灭火性能、环保性能进行深入分析与研究。通过对新型灭火剂性能的研究,得出每种灭火剂的优缺点,筛选出适用于现代民机灭火系统的灭火剂。     

扇区繁忙时段交通流的不均衡度量化研究

以容流量及拥挤度等指标进行的空中交通运行评价无法全面反映空中交通的实际运行状况.在依据重要点对航路段进行分组的基础上,通过计算超容比,确定了扇区繁忙时段,基于多项式二次拟合分析了超容比与基尼系数以及泰尔指数之间的数量关系,基于3σ原则确定了不同超容比情况下的理想不均衡度的取值范围.应用方法对厦门1号扇区的实际运行数据进行了计算分析,验证了不均衡度量化方法的适用性.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

CAN总线在电液伺服阀性能测试系统中的应用

伺服阀性能测试系统中，测控电路和计算机间的模拟信号传输易受外界干扰，而把信号以数码形式通过CAN总线传输的方法，可以彻底消除外界干扰问题，还能提高系统的性能和可靠性。介绍了CAN总线硬件电路、程序设计及CANopen通讯协议的实现，讨论了CAN总线在测试系统上的实际应用。     

Al—Mg系合金工艺性能试验及结果

本文介绍了几种常用的铝镁合金，通过若干工艺性能的对比试验，以实际的检测数据分析说明各自的特点及其共性，以供产品设计和工程应用时选材参考。     

The comprehensive aerospace index (CASI): Tracking the economic performance of the aerospace industry

In this paper, we described the Comprehensive AeroSpace Index (CASI), a financial index aimed at representing the economic performance of the aerospace industry. CASI is build upon a data set of approximately 20 years of daily close prices set, from January 1987 to June 2007, from a comprehensive sample of leading aerospace-related companies with stocks negotiated on the New York Exchange (NYSE) and on the over-the-counter (OTC) markets. We also introduced the sub-indices CASI-AERO, for aeronautical segment, and CASI-SAT, for satellite segment, and considered the relation between them. These three indices are compared to others aerospace indices and to more traditional general financial indices like DJIA, S&P500 and Nasdaq. Our results have shown that the CASI is an index that describes very well the aerospace sector behavior, since it is able to reflect the aeronautical segment comportment as well as the satellite one. Therefore, in this sense, it can be considered as a representative index of the aerospace sector. Moreover, the creation of two sub-indices, the CASI-AERO and the CASI-SAT, allows to elucidate capital movements within the aerospace sector, particularly those of speculative nature, like the dot.com bubble and crash of 1998–2001.     

碳/环氧复合材料两次表面镜基板研制

文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺,性能测试等内容。     

SPOT-5卫星系统性能概述

概要介绍SPOT - 5卫星的主要成像传感器 ,精确定位技术及数据格式。介绍分析卫星数据的应用前景     

两种质量多元诊断理论(英文)

工厂中，多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的，使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用，实际应用结果与理论是一致的。