方板对角拉伸诱导压应力的分析

利用有限元法分析方板在单向和双向对角拉伸条件下诱导压应力的变化规律。计算和实验表明,施加横向拉力,实现双轴向拉伸,能明显减小横向诱导压应力及其分布范围,从而抑制皱曲的发生和发展。     

旋转条件下固体火箭发动机三维内流场数值模拟

基于颗粒轨道模型,通过运动方程加入过载加速度的方式建立了旋转条件下固体火箭发动机内三维两相流的数值模型,并利用该模型研究了不同的旋转加速度对固体火箭发动机中粒子运动轨迹以及聚集浓度的影响。结果表明,随着发动机旋转速度的增大,粒子的聚集带逐渐向壁面附近扩散,在发动机的轴向附近形成一个无粒子区域,旋转速度越大,无粒子区域越大;当旋转速度增加到一定值,粒子的聚集带向外扩散至壁面上,在前封头附近的壁面上形成一条与发动机母线成一定夹角的高浓度聚集带。     

相控阵雷达扫描波位和扫描时间的设计与优化

详细讨论了在相控阵雷达设计中扫描波位如何确定的问题。扫描波位的确定原则是使雷达系统既满足一定的检测概率和作用距离，又能在最短的时间内扫描整个空域。这就必须在波位驻留时间和平均增益损失等因素之间进行折衷。为了进一步节省扫描时间，还对如何利用数字波束形成（ Ｄ Ｂ Ｆ） 技术实现优化进行了探讨。     

脉冲微孔喷射技术及其在增材制造方面的应用

介绍了用于制造单分散球形微米级粒子的脉冲微孔喷射技术.根据微滴制备原理,可将其分为适用于低熔点材料的压片式喷射装置及适用于高熔点材料的传动杆式喷射装置,分别阐述了两种方式的脉冲微孔喷射技术的喷射原理、相关特点以及该技术的发展和研究现状.目前,采用脉冲微孔喷射技术已成功制备出金属、半导体及生体材料单分散微粒子,具有粒径均一、圆球度高等优势.通过与其他微米级粒子制备技术,如均匀液滴喷射法、气动式按需喷射法及雾化法相比较,在诸多方面显示出脉冲微孔喷射法的独特优点.与此同时,分别讨论了脉冲微孔喷射技术在增材制造方面的潜在应用,可直接使用微米级粒子作为增材制造用粉体以及液滴沉积成型.鉴于脉冲微孔喷射技术的独特性,可以预见随着研究的不断深入,脉冲微孔喷射技术将在增材制造方面具有更加广阔的发展空间和应用前景.     

圆筒形拉伸冲压零件下料公式的修正方法

在冲压拉伸制造薄板形零件的模具设计制造中,通常都是先利用公式计算出落料尺寸,根据这个尺寸制造出落料凸模和落料凹模,试生产后再根据制件的误差对落料凸模和落料凹模进行修改,如果成本高,效率低,就通过探讨误差生成的原因以及做出应对的修正方法,从缩小误差,提高试生产效率方面考虑,设法缩短试制时间。     

基于响应曲面的时效成形材料参数修正

为了提高时效成形中回弹现象的有限元仿真精度,使用均匀试验设计结合响应曲面设计的方法,建立了仿真误差对于材料参数的响应函数,求解出材料参数的修正解。以此法得到的仿真结果与试验结果相吻合。     

喷射成形过程雾化熔滴质量流率空间分布的研究

喷射成形是材料领域新出现的高新科学技术。本文研究了喷射成形雾化熔滴射流质量流率和沉积速率的分布规律，建立了它的空间分布函数。结果表明随着雾化压力的增加和沉积距离减小，雾化喷射流变得更集中。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

New results on spin determination of nanosatellite BLITS from High Repetition Rate SLR data

The nanosatellite BLITS (Ball Lens In The Space) demonstrates a successful design of the new spherical lens type satellite for Satellite Laser Ranging (SLR). The spin parameters of the satellite were calculated from more than 1000 days of SLR data collected from 6 High Repetition Rate (HRR) systems: Beijing, Changchun, Graz, Herstmonceux, Potsdam, Shanghai.     

Dependence of creep age formability on initial temper of an Al-Zn-Mg-Cu alloy

The initial temper of the material may directly affect the whole creep age forming(CAF)process. In terms of creep deformation and stress relaxation, using the constant-stress creep aging and constant-strain stress relaxation aging tests, the relationship between initial temper and CAF formability is investigated for an Al-Zn-Mg-Cu alloy at 165 °C for 18 h. Three tempers are selected as the initial tempers in CAF, viz., solution, retrogression and re-solution. The CAF formability of this alloy with initial temper of retrogression is the best, and the creep strain of the retrogression tempered specimen after creep aging of 18 h is about 1.21 and 1.34 times than that of the solution and the re-solution tempered specimens, respectively. The calculated stress exponents of this alloy with three initial tempers range from 7.3 to 9.5, indicating that the CAF of this alloy is mainly controlled by the dislocation creep. The various formability for three initial tempers are attributed to different inhibitions of the transgranular precipitates on the dislocation movement. For the retrogression temper, the initial fine and uniformly distributed precipitates are seriously coarsened after6 h of CAF, which minimally inhibit the dislocation movement. While, for the re-solution temper,the fine precipitates are re-precipitated in the matrix of the alloy, which observably hinder the dislocation movement and lead to the worst formability.