波音787锂电池问题研究

波音在787项目中首次采用了锂电池这一新技术而非传统的镍镉电池,但由于锂电池应用于飞机的技术还不成熟,且锂电池本身容易起火,给波音造成了一系列的磨合期问题.尽管国产飞机ARJ21和C919都没有采用锂电池,但波音应对整个787电池故障事件的方式方法仍然对国产飞机有较大借鉴意义.以787锂电池起火事故为切入点,深入分析事故发生后波音、汤浅公司、FAA、NTSB所采取的应对措施,以及波音和汤浅公司对787锂电池的改进方案,简要阐述了787锂电池起火事故对波音公司造成的影响.     

Gravity wave momentum flux generation close to mid-latitude Andes in mesoscale simulations of late 20th and 21st centuries

Adequate representations of diverse dynamical processes in general circulation models (GCM) are necessary to obtain reliable simulations of the present and the future. The parameterization of orographic gravity wave drag (GWD) is one of the critical components of GCM. It is therefore convenient to evaluate whether standard orographic GWD parameterizations are appropriate. One alternative is to study the generation of gravity waves (GW) with horizontal resolutions that are higher than those used in current GCM simulations. Here we assess the seasonal pattern of topographic GW momentum flux (GWMF) generation for the late 20th and 21st centuries in a downscaling using the Rossby Centre regional atmospheric model under the Intergovernmental Panel on Climate Change A1B emission conditions. We focus on one of the world’s strongest extra-tropical GW zones, the Andes Mountains at mid-latitudes in the Southern Hemisphere. The presence of two GCM sub-grid scale structures locally contributing to GWMF (one positive and one negative) is found to the East of the mountains. For the late 21st century the strength of these structures during the GW high season increases around 23% with respect to the late 20th century, but the GWMF average over GCM grid cell scales remains negative and nearly constant around −0.015 Pa. This constitutes a steady significant contribution during GW high season, which is not related to the GWMF released by individual sporadic strong GW events. This characteristic agrees with the fact that no statistically significant variation in GWMF at source level has been observed in recent GCM simulations of atmospheric change induced by increases in greenhouse gases.     

带加固连接的复合材料梯形梁结构吸能特性研究

通过对梯形梁的连接部分加固,能够改善梯形梁准静态压溃时的失效模式并提高其吸能能力.分别用单层壳和叠壳有限元模型的建模方法,研究无加固连接的复合材料梯形梁在轴向准静态压溃下的吸能特性.在叠壳有限元模型建模可行且仿真结果准确,同时单层壳有限元模型达到了叠壳模型的预测精度,在此基础上,用单层壳有限元模型的建模方法研究带圆柱形和圆锥形两种加固连接的梯形梁在轴向准静态压溃下的吸能特性,并对比这两种加固连接的梯形梁的载荷位移曲线和比吸能大小,得出带圆锥形加固连接的梯形梁的峰值载荷最低同时比吸能最大.     

数值模拟技术在热压罐工艺中的应用

随着复合材料和计算机技术的发展,数值模拟技术在复合材料工艺仿真中的应用也日益明显.总结分析了数值模拟技术在复合材料热压罐工艺中的研究进展,包括热压罐内流场仿真、固化放热控制、固化变形预测,以及热隔膜成型过程仿真的应用前景.随着大数据和复合材料自动化、智能化的发展,发展数值模拟技术是大势所趋.     

TC4钛合金静止轴肩和传统搅拌摩擦焊的温度场对比

基于有限元软件ABAQUS对6mm厚的TC4钛合金传统及静止轴肩搅拌摩擦焊温度场进行了有限元模拟.结果表明,对比传统搅拌摩擦焊接,静止轴肩搅拌摩擦焊接具有较小的高温区,前进方向上具有较大的温度梯度,厚度方向上呈现柱状椭球形分布,上、下表面温度峰值差异较小,具有重叠性较好的热循环曲线.     

表面完整性研究用预测模型的研究进展

综述了国内外表面完整性研究时采用的预测模型的种类、应用等研究现状.详细阐述了使用分析模型和数值模型对材料切除过程中零件表面的显微结构、残余应力等表面完整性参数的预测,并指出了影响预测模型准确性的一些因素.     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

唇口几何参数对短舱进气道性能影响数值研究

针对下一代民用涡扇发动机短舱长径比不断缩小的发展趋势,为改善发动机进口气流参数分布不均、改善进气道的流场结构、提高其气动性能,开展了进气道唇口关键几何参数对短舱进气道流动特性影响的研究。通过CFD数值模拟方法研究了进气道收缩比、唇口超椭圆指数以及唇口超椭圆长短轴比对短舱进气道性能的影响。研究发现,这三个设计参数改变时,均会对进气道性能产生直接的影响,对畸变指数的影响最明显,其中收缩比改变的影响最大,当收缩比每改变0.025,畸变指数的变化率最大可达到50%。进口收缩比的改变影响喉道截面的流动,超椭圆指数变化影响了进口前缘曲率的变化,而超椭圆长短轴比变化影响了进气道唇口内型面的曲率;超椭圆长短轴比越大,超椭圆指数越小,收缩比越大,唇口初始压力损失越大,壁面摩擦损失越大,进气道总压恢复系数越低,畸变程度越高。     

新型翅片式减涡器减阻特性数值研究

为了降低压气机径向引气过程中的压力损失,在设计出新型翅片单元结构的基础上,研究了新型翅片单元结构对径向引气压力损失的影响规律,对不同转速、新型翅片结构的去旋系统开展了数值研究,得到了不同工况下压气机共转盘腔径向引气的流场结构及压力损失分布曲线。研究结构表明:新型翅片单元结构能够抑制盘腔内气流旋流比,降低引气压力损失;翅片单元通道宽度和高度均存在最佳值使得减涡器减阻效果较好,在优选结构翅片单元通道宽度L=0.78,通道高度R3=0.97的条件下,其减阻效果较简单盘腔模型提高86.5%。高低翅片结构能起到较好的减阻效果,随着单侧翅片高度的升高减阻效果逐渐增强,在本文结构下增加单侧翅片高度L1=0.3时减阻效果最优,且A侧或B侧翅片增加带来的减阻效益相同。一方面,最优高低翅片结构其减阻性能相比于简单盘腔模型、典型翅片式减涡器模型以及翅片单元通道宽度L=0.78,通道高度R3=0.97的结构模型分别提高87.5%,29%,7.8%;另一方面,最优高低翅片结构能够减轻翅片单元的质量,具有较高的工程应用价值。     

幂律型流体撞击射流破碎特性直接数值模拟

凝胶推进剂的双股射流撞击雾化广泛应用于液体火箭发动机的燃烧室中,其破碎特征及雾化效果直接影响燃烧效率。为探究雾化特性的发展规律,采用直接数值模拟DNS方法,对射流速度为100m/s的剪切稀化非牛顿液体正交撞击产生的雾化特征、液体表面积、表面波、涡特性以及非牛顿特性开展研究。结果表明,射流下形成的雾化流场迅速扩张形成液膜,液膜两侧边缘破碎成大量的液丝与液滴,核心部分产生撞击波后在气体力的作用下逐步发展为带有凸起和褶皱的不稳定表面波,其撞击波波长最大可达2.46倍射流直径。液体表面积不断增长,但无量纲表面积总体呈现先下降再上升的趋势。气体中的涡量分布则分为有序附着区和无序爆炸区两类,并且涡量主要集中分布于气相区域。此外,射流撞击时产生强剪切使该液体内部的粘性系数下降,最低仅为初始粘性系数的0.3倍。