微小整体叶轮五轴联动微细铣削加工试验研究

微小整体叶轮作为微型发动机的重要组成部分,其加工质量直接影响微型发动机的使用性能。针对微小整体式复杂叶轮流道狭窄、叶片扭曲大和长厚比大等特点,开展了微小复杂扭曲整体式叶轮五轴联动微细铣削加工方法研究。针对微小叶轮加工过程极易发生变形、过切和碰撞干涉等问题,对微小叶轮的加工过程进行工艺规划,建立了微小叶轮流道加工刀具选择的约束方程,计算出叶轮加工刀具的最大理论直径。通过CAM软件对叶轮进行切削仿真,验证了刀具选择和工艺规划的正确性。通过五轴联动微细铣削试验,得到了具有6个直径10mm的叶片、叶片最小厚度0.15mm、叶片最小相邻间距0.58mm的7075铝合金微小整体叶轮。     

微小孔特种加工技术研究现状及展望

近年来微小孔结构在航空航天零部件上的应用越来越广泛,对微小孔的特种加工方法的进展情况进行了综述,总结了每种加工方法的主要特点,并对当前微小孔特种加工技术存在的问题及未来发展趋势进行了总结和展望.     

微纳米尺度流动实验研究的问题与进展

微纳米实验流体力学研究的流动特征尺度在1mm～1nm范围,处于宏观流动到分子运动的过渡区。连续介质力学与量子力学这两个经典理论的衔接,提出了诸如连续性假设适用性、边界滑移等基本理论问题。同时从微纳米尺度研究界面处液/固/气的耦合,化学、电学性质对流动的影响值得关注。微纳米实验测量仪器融入了力、电等测量手段,要求测量空间精度达到nm量级,力的测量精度达到pN,时间分辨率达到ns。本文围绕连续性假设适用性、边界滑移、微纳米粒子布朗运动及微尺度涡旋测量等问题,介绍了 Micro/Nano PIV、示踪粒子流场显示等技术应用于微纳流场观测的进展与难点。目前微纳米流动测量仍然沿着经典流体力学测量“小型化”的思路开展,而纳尺度的测量期待着新的实验方法与技术的提出。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

一种便携式多通道精密测温仪

介绍了利用数字式温度传感器 DS1 6 2 4构成的多路温度测量仪器。它具有线路简单 ,测量精度高的优点 (在 - 5 5～ 1 2 5°C内 ,精度优于 0 .0 5°C) ;带有计算机接口 ,能够实现长时间连续测量。     

碳纳米管阵列推力器放电特性的数值模拟研究

基于直接蒙特卡洛(DSMC)算法、浸入式有限元算法(IFE)、粒子云及蒙特卡洛碰撞(PIC-MCC)算法以及Ammosov-Delone-Krainov(ADK)隧穿电离模型建立了碳纳米管阵列推力器工质气体和CNT场电离过程的三维仿真模型。利用文献中的实验数据对本文仿真模型的有效性进行了验证,结果表明本文仿真模型与实验结果基本一致。针对碳纳米管阵列推力器的放电特性进行了研究,并重点分析了离子与原子碰撞过程对碳纳米管阵列推力器放电特性的影响。结果表明CNT可以极大地增强局部电场,稳态时场增强因子约为1308;与原子的碰撞使得离子在CNT附近更加集中,降低了局部电场,进而降低了其场增强能力。     

机匣沟槽对微型轴流涡轮叶尖泄漏流动的影响

本文通过对某微型涡喷发动机的单级轴流式涡轮进行机匣设计,采用剪切应力输运(SST)模型求解定常黏性雷诺平均Navier-Stokes方程,研究了不同机匣沟槽结构对其叶尖泄漏流动的影响。计算结果说明：当全机匣沟槽结构的叶顶浸入沟槽即d/c＞1.0时,封严效果较好;相较于全机匣沟槽结构,后开式机匣沟槽结构的封严效果更好, 随着沟槽前缘间隙的增大,封严效果减弱;沟槽深度a/c=1时,封严效果最佳,即泄漏流明显减弱,同时效率减小量较小。     

微硅加速度传感器的动态特性补偿方法研究

提出了一种用以扩展加速度传感器使用频率范围的动态特性补偿方法,其基本原理是根据加速度传感器的输入输出传递函数,构造出一个基于硬件的补偿网络,这个补偿网络的传递函数的零极点分别与加速度传感器的传递函数的极零点相抵消,从而使由加速度传感器输出的信号经过补偿环节后其动态特性得到补偿,扩展了加速度传感器的使用频带,同时并不要求加速度传感器处于临界阻尼状态。     

基于微电铸工艺的摩擦接触式微型惯性开关

针对微型惯性开关闭合时间短、接触弹跳问题,设计了增强接触效果的摩擦接触式微型惯性开关。基于MEMS惯性开关工作原理,建立了开关物理模型,研究了不同类型惯性开关的闭合性能,提出了增强接触的摩擦接触方法,设计了摩擦接触式微型惯性开关的结构。为了对比接触性能,基于UV–LIGA叠层光刻和精密微电铸工艺,研制了3种不同类型的惯性开关。最后,进行落锤试验,测试结果显示:施加400g外载加速度时,刚性、柔性、摩擦接触式微型惯性开关的闭合时间分别为10μs、80μs、620μs;在惯性开关中引入摩擦电极,既能延长闭合时间,又能解决弹跳问题。研究结果表明,摩擦接触式微型惯性开关在增强接触效果方面具有很大的优越性。     

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.