WP7系列发动机涡轮导向器叶片盖板的钎焊修复

采用真空钎焊的方法对WP7系列发动机涡轮导向器叶片盖板进行了修复,介绍了修复过程及工艺。修复后的叶片经目视及荧光检验未发现表面裂纹,该修复工艺已成功用于WP7系列发动机涡轮导向器叶片盖板的批量修复,年修复量约1000件。     

Ionospheric total electron content response to annular solar eclipse on June 21, 2020

The effects of physical events on the ionosphere structure is an important field of study, especially for navigation and radio communication. The paper presents the spatio-temporal ionospheric TEC response to the recent annular solar eclipse on June 21, 2020, which spans across two continents, Africa and Asia, and 14 countries. This eclipse took place on the same day as the June Solstice. The Global Navigation Satellite System (GNSS) based TEC data of the Global Ionosphere Maps (GIMs), 9 International GNSS Service (IGS) stations and FORMOSAT-7/COSMIC-2 (F7/C2) were utilized to analyze TEC response during the eclipse. The phases of the TEC time series were determined by taking the difference of the observed TEC values on eclipse day from the previous 5-day median TEC values. The results showed clear depletions in the TEC time series on June 21. These decreases were between 1 and 9 TECU (15–60%) depending on the location of IGS stations. The depletions are relatively higher at the stations close to the path of annular eclipse than those farther away. Furthermore, a reduction of about ?10 TECU in the form of an equatorial plasma bubble (EPB) was observed in GIMs at ~20° away from the equator towards northpole, between 08:00–11:00 UT where its maximum phase is located in southeast Japan. Additionally, an overall depletion of ~10% was observed in F7/C2 derived TEC at an altitude of 240 km (hmF2) in all regions affected by the solar eclipse, whereas, significant TEC fluctuations between the altitudes of 100 km ? 140 km were analyzed using the Savitzky-Golay smoothing filter. To prove TEC depletions are not caused by space weather, the variation of the sunspot number (SSN), solar wind (V_SW), disturbance storm-time (Dst), and Kp indices were investigated from 16th to 22nd June. The quiet space weather before and during the solar eclipse proved that the observed depletions in the TEC time series and profiles were caused by the annular solar eclipse.     

一种新型弱撞击对接机构运动学分析

目前各国在轨应用的对接机构属于硬碰撞式对接机构,在此构型下两航天器在空间进行碰撞接触时撞击能量较大,并且此结构下目标飞行器的对接范围较窄。随着空间探测任务的深入,需要对对接机构提出更高层次的设计要求,因此弱撞击对接机构也将成为空间探测任务中一项重要的研究方向。本文对弱撞击对接机构运动学的正解和反解进行了研究分析,得到了相应的推导公式,并通过MATLAB软件对其进行了算例校验。求解出了对接环运动速度和执行推杆伸出速度的关系,这对弱撞击对接机构的工程研制有很大的应用价值。     

基于嵌入式MATLAB函数编程的火星车能量平衡仿真系统

在以往航天器研制过程中,电源系统能量平衡分析是基于表格化计算的方法,其运算效率低、显示不直观。文章提出了一种可视性强、易编程、更通用的能量平衡分析方法,即采用嵌入式MATLAB函数对电源系统能量平衡分析的功能模块进行编程实现,以火星车电源系统为应用背景,在MATLAB/SIMULINK平台上搭建了一套用于能量平衡分析的仿真系统,并在特定实例下进行仿真分析,仿真结果采用图表曲线形式显示,能清晰、直观地反映能源利用的动态变化趋势,可为电源系统方案优化设计提供参考依据。     

在轨服务航天器导航系统仿真研究

在轨服务航天器（On\|orbit Servicing Spacecraft—OSS）具有重要的军事和民用价值。 分析了OSS的导航任务,给出了导航系统总体方案并设计了导航工作模式。构建了OSS导航仿 真系统的总体框架,分析了OSS导航仿真系统组成及仿真支撑环境,基于MATLAB／RTW仿真平 台开发了OSS导航数字仿真软件。对数据时间同步技术、导航模式切换技术、推力分配算法 等关键技术进行了分析。
     

均匀化处理对7A55铝合金组织与性能的影响

研究了单级均匀化和双级均匀化工艺对铸态7A55铝合金组织和性能的影响规律.结果表明,经450℃单级均匀化处理后,合金中的残留共晶仍然较多,保温60h时合金中残留共晶比例由铸态合金的15.2%减少至7.2%,合金硬度由72HRB降低至60HRB,伸长率则由2.1%增大至11.2%;经450℃/60h+470℃双级均匀化处...     

基于虚拟仪器技术的微波测量仿真系统的设计与实现

该系统根据手动测量原理，将传统的微波测量线及相关的微波测量系统在Labview7环境中进行仿真。利用它可实现多种微波参数的仿真测量，并具有图文并茂、生动直观、价格低廉等特点，为微波实验教学及实际应用创造良好的条件。     

基于BP神经网络的国防企业技术创新能力评价

结合自组织理论提出了国防企业技术创新评价体系,构建了BP神经网络模型,运用MATLAB软件进行了模型仿真.研究发现仿真结果与专家评价结果基本一致.可见,运用BP神经网络方法对国防企业技术创新能力进行评价有一定的通用性、便捷性和实用性.     

航空压气机叶片激光测量仪处理系统软件设计

从航空发动机压气机叶片型面检测的传统方法及特点出发,简单介绍了激光测量仪总体系统,重点阐述了处理系统软件的设计,并将其应用于实践中。