冲击温度的理论计算及分析

当空间飞行器受到碎片的碰撞时,其壳体中会产生冲击加热。文章概述了计算冲击温度的三种基本方法;计算了铁的冲击加热温度,并与实验测量值作了比较。结果表明,利用三项式物态方程计算的冲击温度与测量值符合得比较好。另外,还对影响冲击温度计算值的若干因素进行了分析     

洛仑兹力控制高超声速进气道边界层分离的数值模拟

采用空间HUE格式、时间LU-SGS推进、sst-kw湍流模型、多块结构网格程序,对磁流体动力学(Magnetohydrodynamic:MHD)控制高超声速二维进气道边界层分离进行了数值研究.研究发现,不施加控制时,数值模拟得到的壁面静压和实验结果符合良好,进气道喉道处分离区占据喉道高度的1/3左右.通过施加MHD控制,消除了进气道内部的边界层分离,总压恢复系数从0.502提高到0.56,喉道处流场畸变系数减小了18.6%.     

稀薄流航天器鼻锥迎风凹腔气动力和气动热性能研究

本文采用直接模拟蒙特卡罗(DSMC)方法,对高超声速稀薄流中航天器鼻锥迎风凹腔气动力与气动热性能进行了数值研究。得到了鼻锥外壁面、凹腔侧壁面以及凹腔底面的热流密度分布,分析了不同凹腔深宽比对鼻锥冷却效率以及凹腔腔体内气体参数的影响;以深宽比为1的凹腔为基准,研究了凹腔唇口钝化半径对航天器气动热与气动力的影响。数值结果表明,高超声速稀薄流中迎风凹腔能够降低鼻锥外壁面的热流密度;当凹腔深宽比达到1之后,凹腔侧壁面热流变化趋于一致,热流密度最低点的轴向位置不随深宽比改变,且凹腔底部热流很小;凹腔近底部气体均由稀薄流转化为连续流,腔内气体压力不断振荡;唇口钝化没有明显优势,虽然可以降低鼻锥峰值热流,但是会带来严重的气动力性能下降。     

基于高斯伪谱法的吸气式高超声速飞行器爬升弹道优化研究

吸气式高超声速飞行器爬升弹道设计是其总体设计的一个重要问题。这里提出一种基于高斯伪谱法的弹道优化方法,用于解决该问题。以末端弹道倾角为性能指标,飞行攻角为设计变量,建立了飞行器纵平面弹道优化模型。通过高斯伪谱法对状态变量和控制变量进行离散,将最优控制问题转化为非线性规划问题,再利用序列二次规划算法对其进一步求解。仿真结果表明,该方法收敛域大,对初值不敏感,设计精度高,是吸气式高超声速飞行器方案弹道优化的重要方法。     

基于FQFD的太阳能无人机设计指标排序方法

为解决太阳能无人机（UAV）总体设计中任务需求表达模糊、技术指标重要度排序决策困难的问题,提出了基于模糊质量功能展开（FQFD）的太阳能无人机总体设计指标排序方法。该方法在传统质量功能展开（QFD）质量屋的基础上,引入三角模糊数,表征任务需求的不确定性和模糊性;在模糊隶属度函数未知的情况下,采用α加权修正水平截集去模糊化方法计算技术指标重要度,获得技术指标重要度排序,为总体设计优化决策提供依据。最后以长航时太阳能无人机的总体设计为例,对任务需求—工程特性—技术指标的两级质量屋模型进行计算分析,得到续航能力、巡航高度、动力系统效率、巡航速度和气动效率是太阳能无人机最重要的5个技术指标的结果。此方法客观性较强,可处理复杂的系统不确定性,为太阳能无人机总体方案设计及决策应用提供参考依据。     

Adaptive accurate tracking control of HFVs in the presence of dead-zone and hysteresis input nonlinearities

A novel accurate tracking controller is developed for the longitudinal dynamics of Hypersonic Flight Vehicles (HFVs) in the presence of large model uncertainties, external disturbances and actuator nonlinearities. Distinct from the state-of-the-art, besides being continuity, no restrictive conditions have been imposed on the HFVs dynamics. The system uncertainties are skillfully handled by being seen as bounded “disturbance terms”. In addition, by means of back-stepping adaptive technique, the accurate tracking (i.e. tracking errors converge to zero as time approaches infinity) rather than bounded tracking (i.e. tracking errors converge to residual sets) has been achieved. What’s more, the accurate tracking problems for HFVs subject to actuator dead-zone and hysteresis are discussed, respectively. Then, all signals of closed-loop system are verified to be Semi-Global Uniformly Ultimate Boundness (SGUUB). Finally, the efficacy and superiority of the developed control strategy are confirmed by simulation results.     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

Disturbance observer-based backstepping control for hypersonic flight vehicles without use of measured flight path angle

In this paper a nonlinear control method is proposed for the tracking control of hypersonic flight vehicles. The designed control laws do not utilize the measured flight path angle due to its inferior accuracy in practical engineering. For this, an estimated flight path angle is designed via the measurements of the altitude and velocity. A tracking differentiator is designed for constructing nonlinear disturbance observer which is used to estimate the model uncertainties including the parameter indeterminacies and external disturbances in the channels of velocity and pitch rate. A robust high-order differentiator is introduced to avoid the employment of the measured flight path angle and estimate the lumped disturbance in dynamics of flight path angle. Meanwhile, the possible saturation of the control inputs is considered and compensated by the auxiliary states. The boundness of closed-loop signals is proved through the Lyapunov theory. Comparative simulations are carried out and the results demonstrate the effectiveness of the proposed method.     

高超声速条件下星光传输模拟方法与仿真

以高超声速飞行器为研究对象,建立了高速流场下的星光传输模拟仿真方法,定性、定量地研究平台气动光学效应对星光导航的影响。采用基于k-ω/SST两方程湍流模型的雷诺平均法计算星敏感器安装在飞行器不同位置处（头部、中部和尾部）的外流场密度分布,进而得到流场的空间折射率分布。在此基础上,利用几何光学法计算星光由高速层流流场引起的光程差、点扩散函数、像偏移等光学传输效应,得出经过层流流场的星光降晰图。同时运用统计光学理论计算高速湍流流场引起的星光出瞳面的波像差、密度均方差、相位均方差、Strehl比等光学传输效应,得出经过湍流流场的星光降晰图。仿真结果与理论分析吻合,从而为研究星光在高超声速流场中传输的机理提供了可靠的技术手段。     

高超声速滑翔飞行器轨迹优化与制导综述

针对多约束条件下高超声速滑翔飞行器轨迹优化与制导问题,从离线和在线两个方面综述了高超声速滑翔飞行器轨迹优化与制导方法,并进行了展望。首先建立了带随机干扰的高超声速滑翔飞行器轨迹优化与制导问题模型。针对是否考虑随机干扰,从确定性和鲁棒性两方面对离线轨迹优化与制导进行了综述。在线轨迹优化与制导方面主要对在线轨迹生成加轨迹跟踪的标准轨迹制导和预测制导两方面进行了综述。最后,提出轨迹优化与制导技术应加强在模型、计算效率、多任务、高精度制导等几个方面的研究。