基于模拟退火粒子群算法的波浪发电系统最大功率跟踪控制

波浪发电系统最大功率点跟踪控制中,传统粒子群算法存在早熟收敛和局部搜索能力不足问题,为此提出基于模拟退火算法的粒子群优化方案。该算法每次更新粒子的速度和位置时,通过比较当前温度下各个粒子的适配值与随机数的大小,从所有粒子中确定全局最优解的替代值,从而使粒子群算法在发生早熟收敛时能够跳出局部最优并快速找到全局最优解。仿真结果表明,与传统粒子群优化算法相比,模拟退火粒子群算法可有效避免波浪发电系统陷入局部最大功率点,并快速实现全局最大功率跟踪,提高了波浪能捕获率。     

地源热泵技术在建筑节能中的应用

本文探讨如何通过地源热泵技术实现建筑节能。研究通过地源热泵来实现一机多用,使其既能用于冬季供暖,又可以用于夏季制冷。同时也讨论了如何与太阳能相配合,来实现地热平衡。文中还给出了通过插值法和曲线拟合法对测量数据进行处理获得变温带和增温带的温度-深度曲线的方法。     

填加造孔剂法制备泡沫铝及其吸能性能

以尿素为造孔剂,采用填加造孔剂法制备泡沫铝,系统研究了成型烧结温度、孔隙率和孔径大小对泡沫铝吸能性能的影响,在此过程中采用电子万能试验机和数字图像相关(DIC)技术同步测试分析。结果表明:填加造孔剂法可以良好的控制泡沫铝的孔隙率和孔径;泡沫铝的最佳成型烧结温度为650℃,在此温度下,泡沫铝的压缩屈服强度达到10.7 MPa;随着孔隙率的降低,泡沫铝的屈服强度和平台应力逐渐提高,材料吸能性能有显著增强;当孔径小于2.0 mm时,随着孔径的增大,材料的吸能性能小幅提高。DIC技术可以直观的表征泡沫材料力学行为,具有良好的工程应用前景。     

基于基元反应的总包机理建模及算法优化

以煤油/氧的化学动力学体系为例,介绍了基于基元反应的总包机理建模、反应速率计算等国际先进方法,归纳了针对化学动力学过程由建模到求解的一套完整流程。首先选用正十二烷作为煤油的替代燃料,通过直接关系图法(DRG)结合计算奇异值摄动法(CSP)的机理简化方法将正十二烷203组分、738步的详细反应机理化简为了32组分、36步的总包反应机理。为了计算总包反应速率,采用线性准稳态假设(LQSSA)计算准稳态组分浓度,解耦了准稳态组分间的非线性耦合,在保证计算精度的同时提高算法稳定性和效率。最终,通过VODE刚性积分求解器求解化学动力学方程组,并形成了一套可与CFD主程序耦合使用的化学动力学计算子程序。     

基于划分检测模型的终端区异常轨迹检测方法

针对异常轨迹对轨迹聚类效果的影响以及给进离场程序管制适用性的量化分析提供分析数据的考虑，在结合数据挖掘中异常检测理论的基础上，利用划分检测框架及将距离和密度结合起来，设计了一种有效检测算法，运用到终端区飞行轨迹的异常检测当中，检测出飞行轨迹中的异常轨迹，从而改善轨迹的聚类效果。实例仿真结果表明：方法可以准确地检测出异常轨迹。     

On the origin of ultrahigh energy cosmic rays

The origin of cosmic rays with energy E ? 10¹⁸ eV is a long-standing problem in astrophysics. The development of ever larger detectors has brought in key experimental results in the past decade, most particularly the detection of a cut-off at the expected position for the long sought Greisen–Zatsepin–Kuzmin suppression as well as evidence for large scale anisotropies. This paper summarizes and discusses the recent achievements in this field.     

Mean energy of response to galactic cosmic ray spectrum: IMP 8 and Climax neutron monitor

Solar modulations of galactic cosmic ray (GCR) intensity contain a wealth of information about their transport in the heliosphere. To extract this information from the data one studies the dependence of the observed modulations on the mean energy of response of detectors providing data for the analyses. There is a great deal of confusion about the detector energy response to GCR spectrum in the literature. We present a preliminary report on the computations of the mean energy of response for the Climax neutron monitor (CL/NM) and IMP 8 cosmic ray nuclear composition instrument to GCR protons for 1973–1998, covering the solar cycles 21 and 22. We find that for penetrating proton channel on IMP 8 the mean energy changes by a factor of over two whereas for the neutron monitor the change is only 21%. However, the corresponding change for the computed modulation function is a factor of about 3.5.     

飞机稳定尾旋的预测研究

在考虑各种影响因素的基础上，增加了交叉惯性积对稳定尾旋的影响，从而导出了分析稳定尾旋的有关公式。为了避免遗漏解的可能性，采用不需选择初值的求解方法，给出了稳定尾旋的判据。应用该方法对某型飞机的尾旋进行了预测计算，求出了一个陡尾旋解和一个平尾旋解，计算结果与该飞机尾旋试飞结果吻合较好，表明计算方法是正确的，计算结果可用于指导飞机的尾旋试飞。     

压气机叶片外物损伤模拟的撞击能量当量法

在分析外物与叶片间的运动态势后，提出压气机叶片外物员伤模拟的撞击能当量法，即使得摆锤的势能与外物摘击叶片时可能达到的功能相等。据此，设计并制作了摆锤装置，并实验观察到钛制压气机叶片损伤形态与撞击能量间的变化关系，即随着撞击能量的增加，损伤形态产生的顺序为，压痕→突缘→裂纹→突缘呈４５°剪切破坏，这与外场收集到的叶片的前缘损伤形态一致，同时，采用了ＴＣ４压气机叶片进行了相应的高周疲劳试验，验证了方法     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.