飞机液压系统动态油温计算方法优化

分析了动态油温计算方法的不足,将此方法中的液压油箱计算模型加以优化得到改进的动态油温计算方法,基于功率损失法给出了飞机液压系统中四种典型液压附件的温度计算方程。以某航空液压泵地面试验系统为计算实例,将改进方法计算的结果与试验结果、改进前方法的计算结果进行对比分析,结果表明改进的动态油温计算方法相比改进前的方法具有更高的准确度。     

Energetic Hydrogen and Oxygen Atoms Observed on the Nightside of Mars

We present measurements of energetic hydrogen and oxygen atoms (ENAs) on the nightside of Mars detected by the neutral particle detector (NPD) of ASPERA-3 on Mars Express. We focus on the observations for which the field-of-view of NPD was directed at the nightside of Mars or at the region around the limb, thus monitoring the flow of ENAs towards the nightside of the planet. We derive energy spectra and total fluxes, and have compiled maps of hydrogen ENA outflow. The hydrogen ENA intensities reach 10⁵ cm⁻² sr⁻¹ s⁻¹, but no oxygen ENA signals above the detection threshold of 10⁴ cm⁻² sr⁻¹ s⁻¹ are observed. These intensities are considerably lower than most theoretical predictions. We explain the discrepancy as due to an overestimation of the charge-exchange processes in the models for which too high an exospheric density was assumed. Recent UV limb emission measurements (Galli et al., this issue) point to a hydrogen exobase density of 10¹⁰ m⁻³ and a very hot hydrogen component, whereas the models were based on a hydrogen exobase density of 10¹² m⁻³ and a temperature of 200 K predicted by Krasnopolsky and Gladstone (1996). Finally, we estimate the global atmospheric loss rate of hydrogen and oxygen due to the production of ENAs.     

一种弱场区无线传输系统

在铁路无线列调通信中存在弱场区和盲区,通信质量难以控制。设计了完整的方案,提高了原无线列调中存在的弱场区的场强,并增大场强覆盖率,使通话距离得到扩展,改善了话音质量。     

自动钻铆技术在波音737尾段项目中的应用

通过自动钻铆技术在波音737尾段中的应用,介绍了自动钻铆技术的特点及工艺.     

风扇前传噪声及声衬特性研究

为了探究航空发动机的风扇噪声,通过试验研究了缩尺风扇前传噪声在不同转速工况下的频谱特性和周向模态特性,并对所设计的环形声衬降噪效果进行了验证。研究结果表明,基于试验测量数据分析得到的频谱特性和周向模态特性满足转静干涉噪声理论。随着转速的提高,风扇纯音噪声越显著,高转速工况下纯音噪声的能量约占风扇前传噪声的85%。在所研究的工况范围内,该声衬对目标频率及模态均有显著的降噪效果,且在85%转速工况时的纯音降噪效果最优,其主模态的传声损失约为59dB。该声衬对于设计频率附近的宽频噪声也有一定降噪效果,在85%转速时的宽频噪声平均传递损失约为3dB。     

高精度盘式永磁电机温度分析与研究

以高精度无槽盘式永磁电机为研究对象,建立了电机三维电磁仿真模型。详细分析了该电机反电动势和转矩特性,避免由高次谐波引起的定、转子及永磁体涡流损耗,有效改善了电机的热性能,为进一步研究打下基础。建立了三维温度场仿真模型,分析了热源分布和传热过程,计算了电机在自然散热条件下温度的稳态分布。最后通过电机温升试验,验证了理论分析的正确性与合理性。     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

点阵结构空气舵及内部流体热流固耦合研究

开展了钛合金TC4材料激光粉末床熔融(LPBF)工艺研究,在此基础上设计了多孔轻质空气舵模型,并基于有限差分法(FDM),采用三维流固耦合共轭传热数值计算方法,利用流体体积法(VOF)追踪流体自由液面,研究了典型的点阵夹层结构的空气舵内部冷却液动态换热过程的相互影响过程,考虑了冷却液与钛合金材料蒙皮间的耦合传热及湍流换热。结果表明,空气舵的内部流体压强随速度的增加而增加,从而导致流体出口的速度增加。当压强增加到一定程度时,流体的出口以水柱形式喷出。虽然较大的流体速度可以带走较多的热量,但是影响远小于对压强的影响。综合考虑空气舵的服役要求,获得了合适的冷却水入口速度。     

Simulation analysis for effects of bone loss on acceleration tolerance of human lumbar vertebra

The purpose of the present study was to analyze and predict the changes in acceleration tolerance of human vertebra as a result of bone loss caused by long-term space flight. A human L3–L4 vertebra FEM model was constructed, in which the cancellous bone was separated, and surrounding ligaments were also taken into account. The simulation results demonstrated that bone loss has more of an effect on the acceleration tolerance in x-direction. The results serve to aid in the creation of new acceleration tolerance standards, ensuring astronauts return home safely after long-term space flight. This study shows that more attention should be focused on the bone degradation of crew members and to create new protective designs for space capsules in the future.     

失重性骨质疏松腰椎力学性能研究

航天员在长期失重环境影响下,会容易造成椎体失重性骨质疏松。为了探究骨质流失对腰椎承载能力的影响,设计了不同骨密度的腰椎力学仿真,通过图像处理建立了腰椎三维模型,利用有限元算法得到腰椎应力分布,对比了不同材料属性腰椎模型应力结果。结果表明:骨质疏松腰椎的应力值较正常腰椎变小,而形变量却明显增大。可以看出,骨质流失时,会导致腰椎骨骼材料性能发生变化,使腰椎形变量增大,并且使腰椎结构承载能力降低。