基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

钉头型式对复合材料层合板机械连接强度的影响

通过3种不同铺层比例的复合材料层合板机械连接接头的挤压强度测试，研究了钉头型式对复合材料层合板机械连接挤压力学性能的影响，获得了沉头螺栓挤压强度修正系数。试验数据表明：采用沉头螺栓的复合材料机械接头 的挤压强度，可达到采用凸头螺栓的复合材料机械连接挤压强度的90%左右，但接头刚度仅为采用凸头螺栓的复合材料接头刚度的40%~50%。研究采用Hashin失效准则和Tan-Camanho损伤扩展方法，对两种钉头型式的复合材料层合板机械连接接头的挤压失效过程进行了有限元分 析，预测了复合材料层合板机械连接接头的偏移挤压强度和极限挤压强度，模型预测值与试验值的误差不超过15%。     

Multiple-site investigation of the properties of an HF radio channel and the ionosphere using Digital Radio Mondiale broadcasting

The Digital Radio Mondiale (DRM), one of the new digital radio broadcasting standards, has been designed to overcome typical short wave radio channel difficulties, such as the multipath propagation and fast temporal changes of the received signal level, both related to the properties of the ionosphere along the path of propagation. In particular, some of the RF carriers used in the applied COFDM transmission technique serve to estimate the current state of the radio channel to enable the proper demodulation of the received signal.We have been detecting such RF carriers on select frequency channels (standard DRM broadcast) using a network of recording stations located in different parts of Poland in order to collect data on the HF radio channel. We have been also evaluating the usefulness of this procedure in providing information on the current state of the ionosphere in the refraction region between the transmitter and receivers. When the DRM system becomes more widespread, this method can supplement data that comes from the ionosondes, since it does not require much financial resources and the receivers can be easily scattered over a large area. This paper presents a set of experimental data and its analysis.     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

线对空间回转轴线的平行度测量方法的研究

提出一种线对空间回转轴线平行度的测量方法，并进行误差分析。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

我国BPL时号的频率控制系统及结果分析

根据我国现行ＢＰＬ时号的频率控制系统，分析ＴＢＰＬ时号频率控制系统的缺陷，对目前ＢＰＬ时号的频率稳定性进行了评价，提出了一种新的频率控制方案。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.