联合使用激波捕获—拟合法求解激波间断的跨声速流场

吸取激波捕获和激波拟合两种方法各自的优点,发展了一种求解有激波的跨声速流场的方法,并对回转叶栅中定常跨声速流场做了计算。计算中,通过捕获法确定初始激波位置,然后经反复修正,拟合出确定的流场通道激波。计算表明,这种方法可自动获得清晰的激波,流场中气流各参数分布合理。这一方法可适用于复杂边界和不同进口M数,计算时间仅比势函数方法多一倍左右。     

带有太阳电池阵的卫星电源系统在轨测试方法

根据带有太阳帆板的地球同步卫星在轨测试需求，分析了星上电源系统的组成及技术状态；并以光照区可调节母线为例。给出了卫星电源系统在轨测试方法及相应的计算公式；最后，通过工程验证了该方法的正确性。     

无穷观问题的研究(Ⅲ)——‘每一''与‘所有''

本组系列论文（I）－（Ⅴ）从数学和认识论的角度系统地研究了无穷观问题的历史发展和现状，确立了无穷观背景世界的三分法原则，指出了两种穷观相互排斥的局限性，形成了统一两种无穷于同一框架中的基本观点，并建立了一个统一实无限与潜无限于同一框架中的公理集合论系统APAS。     

一般硬化材料弹塑性旋转盘的变分解法

首先在小弹塑性范围内用应变的奇次四项式相当精确地拟合一般硬化材料的拉伸曲线;再在体积不变条件下用弹性位移场的已知模态和一待定幅值构成弹塑性位移场;最后用势能原理确定该幅值而得到封闭解。     

旋成体零攻角纵向大扰动势流的AF-2迭代及其并行算法

 <正> 1.引言 为提高跨音速差分计算效率,人们在计算格式的设计、改进方面做了大量的工作,并取得了可喜的成就。并行计算机的出现和发展,使我们有可能进一步提高计算效率。第9期阂赛金等:旋成体零攻角纵向大扰动势流的人F一2迭代及其并行算法A弓n因为并行处理机具有处理数据能力强、计算效益高的特点,但这种机器必须结合具体问题和机器特点加以考虑才能发挥其优势。目前,利用我国设计的“YH一1”(“银河一1”)亿次并行处理机,开展跨音速差分计算的并行算法研究具有理论和运用上的重要意义     

低频电连接器检测方法研究CSCD

本文主要阐述了低频电连接器外观检测和电性能测试中的接触电阻、绝缘电阻和介质耐电压的检测方法及其注意事项,提出为满足武器系统对低频电连接器耐恶劣环境、高可靠的特殊需求,有效保证武器型号系统中电连接器的质量,必须规范低频电连接器外观及电性能指标检测标准。本文可为从事低频电连接器检测工作的人员提供参考。     

Electric potential structures of auroral acceleration region border from multi-spacecraft Cluster data

This paper studies an auroral event using data from three spacecraft of the Cluster mission, one inside and two at the poleward edge of the bottom of the Auroral Acceleration Region (AAR). The study reveals the three-dimensional profile of the region’s poleward boundary, showing spatial segmentation of the electric potential structures and their decay in time. It also depicts localized magnetic field variations and field-aligned currents that appear to have remained stable for at least 80?s. Such observations became possible due to the fortuitous motion of the three spacecraft nearly parallel to each other and tangential to the AAR edge, so that the differences and variations can be seen when the spacecraft enter and exit the segmentations, hence revealing their position with respect to the AAR.     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

基于椭圆空腔虚拟势场的航天器集群控制方法

航天器集群由多个航天器在空间轨道上近距离飞行,进行信息交换,并相互协同共同完成空间任务。航天器集群作为智能集群在空间领域的表现形式,是智能集群的重要组成部分。当前,许多空间科学研究机构提出了多个航天器集群的研究计划,如 ANTS计划、APIES计划等。文章以在小行星带探测航天器集群为研究对象,提出了航天器集群的自组织控制方法,利用虚拟势场力使得与这个参考航天器构成最大距离可控的空间构型,从而保 证了航天器集群中的所有航天器共同构成松散空间构型。     

基于改进人工势场法的服务机器人路径规划

人工势场法是服务机器人路径规划算法中一种简单有效的方法.针对传统人工势场法存在的目标不可达问题,通过在原来的斥力函数中加入一个调节因子的方法解决,同时采用遍历搜索法解决局部极小值问题,并引入安全距离以及改进调节因子以提高机器人路径规划过程中的安全性能.最后,利用Matlab软件将改进后的人工势场法应用于服务机器人路径规划并进行了仿真实验.仿真结果表明,基于改进人工势场法的服务机器人路径规划有效地解决了机器人不能到达目标点的问题.