Study of UV Ne II line shapes in the cathode sheath of an abnormal glow discharge

We report results of an experimental and theoretical study of complex UV line shapes of Ne II 369.421 nm, Ne II 370.962 nm, Ne II 371.308 nm, and.Ne II 372.711 nm lines in the cathode sheath (CS) region of an abnormal DC glow discharge in pure neon. Two sets of experimental profiles and electric field distributions, one for discharge with tungsten and the other with titanium cathode, were obtained by means of the optical emission spectroscopy (OES) and theoretically studied by the iterative CS kinetic model. It is shown that our theoretical model enables the determination of the most important CS parameters (e.g. the thickness of the CS region, and the theoretical distributions of electric field and gas temperature) and thereupon based accurate theoretical predictions of the experimentally observed profiles of the studied lines.     

Trajectory optimisation in electrical discharge machining of three-dimensional curved and twisted channels

Numerical control electrical discharge machining(NC EDM) is one of the most widely used machining technologies for manufacturing a closed blisk flow path, particularly for three-dimensional(3D) curved and twisted flow channels. In this process, tool electrode design and machining trajectory planning are the key factors affecting machining accessibility and efficiency. Herein, to reduce the difficulty in designing the electrode and its motion path in the closed curved and twisted channels, a heur...     

热障涂层的研究进展

主要介绍了热障涂层在现阶段的研究和应用，以及它们的组成和性能。讨论了热障涂层现有的三种涂层制备工艺和寿命预测模型，并对等离子喷涂和电子束物理气相沉积作了详细的对比，同时指出了热障涂层未来的研究方向。     

Breakthrough detection in electrochemical discharge drilling to enhance machining stability

Film cooling holes are widely used in aero-engine turbine blades. These blades feature large numbers of holes with complex angles and require a high level of surface integrity. Electrochemical discharge drilling(ECDD) combines the high efficiency of electrical discharge drilling(EDD) with high quality of electrochemical drilling(ECD). However, due to the existence of a variety of energy for material removal, accurate and timely detection of breakthroughs is fraught with difficulties. An insuffic...     

航空发动机和工业燃气轮机热喷涂热障涂层用金属黏结层:回顾与展望

超音速火焰喷涂制作的金属黏结层加料浆喷涂制作的柱状晶结构陶瓷隔热层被视作新一代航空发动机和燃气轮机用热喷涂热障涂层,其中采用的MCrAlY金属黏结层正朝着长寿命、低成本、适用于新燃料的方向发展。本文综述近年来航空发动机和燃气轮机热端部件热障涂层用MCrAlY金属黏结层研究进展,并对涂层的结构设计与成分设计进行探讨。     

航空用不锈钢磨粒流光整加工表面完整性研究

为研究磨粒流光整加工不锈钢闭式整体叶环的表面完整性，通过对电火花制备的不锈钢试样进行加工时间、加工压强及磨料目数的单因素试验，研究3个因素对加工后表面完整性的影响。结果表明：表面粗糙度Ra随着加工时间的增加而降低，从初始时的1.459μm降至60 min时的0.193μm，降低速率越来越慢，最后趋于稳定。磨粒流加工有效去除了加工表面再铸层。显微硬度在加工后明显降低，由450～950 HV降至270～350 HV且分布均匀性得到改善。显微硬度随着加工时间的增加整体上呈降低趋势，并出现了一定的加工硬化现象。在使用不同目数的磨料进行磨粒流加工后，残余应力由拉应力变为压应力。随着加工时间和加工压强的增加，试样表面越平整，抛光效果越好。     

Time resolved study of laser triggered electric discharge spark in atmosphere: Machine learning approach

In this paper we analyze the possibilities of using machine learning algorithms for analysis of optical spectra of electric discharge spark in atmosphere. Breakdown in air can be initiated by intense laser pulse, making plasma which has a significant electrical conductivity. The formed plasma can be further maintained by electric current obtained from capacitor discharge. In such a case the capacitor voltage can be much lower than the striking voltage (the voltage needed to initiate the electric breakdown in air). Present setup has timing precision and low jitter of fast laser and arbitrary high energies corresponding to capacitance and voltage to which the capacitor is charged. We have used a streak camera equipped with a spectrograph to analyze optical emission of plasma obtained in this way. Q-switched Nd:Yag laser was used to achieve the initial breakdown in air. Machine learning methods were used in order to classify optical spectra of plasmas with different electron temperatures obtained with different excitation energies. We have shown that, instead of using the usual way of identifying the spectral peaks and calculating their intensity ratio, it is possible to train the computer software to recognize the spectra corresponding to different electron temperatures. Principal component analysis was used to reduce the dimensionality of problem. We present possibilities of plasma electron temperature estimation based on several clustering algorithms.     

Recent developments in thermal characteristics of surface dielectric barrier discharge plasma actuators driven by sinusoidal high-voltage power

Flow control using surface Dielectric Barrier Discharge(DBD) plasma actuators driven by a sinusoidal alternating-current power supply has gained significant attention from the aeronautic industry. The induced flow field of the plasma actuator, with the starting vortex in the wall jet,plays an important role in flow control. However, the energy consumed for producing the induced flow field is only a small fraction of the total energy utilized by the plasma actuator, and most of the total energy i...     

热障涂层在航空发动机涡轮叶片上的应用研究

从热障涂层在涡轮叶片的应用需求出发,研究了陶瓷热障涂层的材料与制备方法,介绍了热障涂层的基本原理和主要工艺特点,解决了热障涂层在喷涂过程中所产生的堵塞气膜孔、减小排气面积、降低疲劳性能、遮挡等方面的难点问题,给出了热障涂层叶片在试验和试车中的考核结果。