Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

基于流管试验的管道声传播预测

通过平板声衬流管试验，测试了管道内无流动和有流动下不同入射声波频率的管道壁面复声压，并基于试验模型与数据分别开展了二维和三维管道声传播预测，将试验测量结果与预测结果进行了对比。结果表明:二维和三维的预测结果非常吻合，尤其是在无流动条件下；在不同流动条件和不同频率下，声传播预测给出了与试验数据较为吻合的结果，壁面声压级的趋势与试验结果一致，基本验证了管道声传播预测模型的准确性；对比不同流动条件和频率点，有流动下预测的壁面声压级的误差比无流动更大，低频下预测的壁面声压级的误差比高频更大。      

动态时频谱分析、探测和跟踪的随机有限集法

动态出现和消失多分量信号的时频分析问题一直是非平稳信号处理的难点之一。为此，提出了一种分析、探测和跟踪多分量信号的随机有限集法。该算法利用时频变换，如短时傅里叶变换或自适应谱估计法，以及多项式预测模型，将多分量信号的时频分析问题归纳成可利用随机有限集进行多目标追踪的问题。分析表明：借助于提出的初始权重赋值算法，以及谱分量幅度和频率的联合似然函数，就可利用高斯混合概率假设密度滤波器来实现对动态时频谱的分析、探测和跟踪。在仿真实验中，所提算法有效提升了动态时频谱的跟踪精度，其对微弱时频谱分量的探测能力，以及对载频差异的分析能力均优于文献报道的算法。     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

Statistical characteristics of low latitude Pc4s: Influence of solar wind and IMF parameters

Pc4 signatures for the year 2013, extracted from geomagnetic north–south and east–west components of induction coil magnetometer (LEMI 30) from low latitude station Desalpar (DSP), operated by Institute of Seismological Research (ISR), India have been investigated vis-à-vis the prevalent interplanetary parameters (IMF) as well as the geomagnetic activity indices. A clear dominance of Pc4-5 (467 events) over Pc3 (17 events) is observed. Local time variation of Pc4 shows a peak in the noon sector in both X and Y components. Our investigations show that the dominant peak frequency is 10 mHz at low latitude region. Correlations with solar wind and IMF parameters illustrate highest occurrence of Pc4 for a solar wind speed of 300–400 km/s and average IMF B field of 3–6 nT. The amplitude of Pc4s at DSP shows an increase with increasing solar wind speed, plasma density, solar wind dynamic pressure and average B field which is also reflected in the trend of frequency variation of these pulsations. We report that IMF clock angle at low latitude does not have influence on Pc4 occurrence. Based on the characteristics of these events, detected in latitudinally distributed stations from low and mid-latitudes from northern and southern hemisphere, we infer that modes were compressional, which could be driven by K-H instability or solar wind dynamic pressure, as compressional modes can propagate to low latitude with little attenuation.     

基于NB-IoT技术和GA-BP神经网络的车位预测系统

围绕有效整合城市停车资源,提高现有车位存量利用率的需求,构建了一种基于NB-IoT技术的车位预测系统。该系统采用NB-IoT技术进行信息采集与传输实现车位信息的共享;考虑到车位状态信息实时变化的特性,用历史车位占用数据来建立车位预测模型,推测出未来短时内车位变化趋势。为了提高车位预测的精度,采用遗传算法(Genetic algorithm,GA)优化反向传播(Back propagtion,BP)神经网络建立GA-BP神经网络车位预测模型。以某地下停车场历史数据为例进行仿真实验,研究结果表明:车位预测模型预测值与实际值相近且趋势保持一致,能够有效准确的预测车位状态变化,具有较高的精度。     

GNSS驯服芯片级原子钟方法研究CSCD

芯片级原子钟是一种体积小且功耗低的高精度时钟源,具有广泛的用途。针对这一特点,设计了基于GNSS的芯片级原子钟驾驭算法。以GNSS系统时作为参考,测量芯片级原子钟与GNSS系统时间的钟差,并对芯片级原子钟进行钟差建模,获取其特征参数。通过乒乓法计算出钟驾驭调整量,对芯片级原子钟进行控制,最终将芯片级原子钟驾驭到GNSS系统时间上。经过实验验证,在驾驭时间常数为100s的情况下,芯片级原子钟与GNSS系统时间的时钟同步误差在-7.5~7.5ns之间;1h频率准确度为5.8×10-13;平均时间为10000s时的频率稳定度为3×10-13。     

基于深度学习的突防控制博弈对象匹配方法CSCD

针对基于博弈理论设计应对多枚拦截弹的协同突防控制方案时需要确定博弈对象的问题,提出了一种基于长短时记忆(LSTM)网络的拦截弹攻击对象匹配方法。基于传统防空导弹飞行时序与流程构建拦截弹飞行轨迹库,以轨迹库为训练样本对LSTM网络进行训练,并以此为基础构建航迹预测模型与对象匹配模型,实现对拦截弹攻击对象的识别。仿真结果表明,该方法能够有效识别拦截弹拦截目标,为后续的巡航弹突防研究提供支撑。     

2.5维机织复合材料细观几何模型及刚度预测方法研究进展

本文从2.5维机织复合材料细观几何结构出发,讨论了织造及成型工艺对材料实际细观几何结构的影响,并分析了不同纱线截面及路径假设所建立代表性体积胞的优缺点。对考虑工艺因素的代表性体积胞是否具有统一性和体素单元法建模的合理性做出对比分析。在代表性体积胞的基础上,重点讨论了2.5维机织复合材料刚度的数值预测方法,并将其与刚度的理论预测方法作了简单对比。基于刚度的数值预测方法,分析了各种机织参数对刚度系数的影响,并且对比了不同代表性体积胞模型的应力场。此外,还讨论了2.5维机织复合材料叶片的建模分析技术与刚度设计方法。最后,指出了当前2.5维机织复合材料细观建模及刚度预测方法存在的问题与不足,并且对其力学性能研究的发展趋势进行了展望。     

并联混合动力齿轮传动涡扇发动机建模与性能分析

为对比探究未来大推力航空混合动力系统与传统航空发动机的优劣,本文依托某概念型齿轮传动涡扇(Geared turbofan,GTF)发动机,设计了一个并联航空油-电混合动力系统(hybrid GTF,hGTF),在Matlab /Simulink数字仿真软件中建立相匹配的电动力模型以及氮氧化物NOx排放和噪声预测等性能参数计算模型,并在稳态和飞行任务剖面下初步分析了电动力系统的引入对原基线GTF发动机的性能改变状况。稳态仿真结果表明,大推力等级的并联油-电混合动力系统中,至少需要兆瓦级的电动力系统进行匹配;当电动力系统处于电动模式时,可能会带来低压压气机喘振的隐患;当电动力系统处于再生模式时,电能源相当于经过了电能到机械能再到电能的二次效率损失,不建议采用。飞行任务剖面动态仿真结果表明,相比于传统GTF发动机,hGTF推进系统的燃油消耗率最高下降15%,总燃油消耗节省8.3%, NOx总排放量减少18.8%,各部件起飞噪声总声压级减少1.5~3.3dB。分析结果表明采用并联混合动力系统具有显著提升省油、减排效果的能力,同时也具有一定的降噪潜力。