Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

含多部位损伤搭接结构应力强度因子三维有限元分析

应力强度因子(Stress intensity factor,SIF)分析是含多部位损伤(Multiple site damage,MSD)结构剩余强度和裂纹扩展寿命预测的基础和关键。考虑接触与摩擦,建立了含MSD搭接结构的三维有限元模型,研究了不同裂纹长度、铆钉类型以及损伤模式下裂纹尖端SIF分布情况和变化规律。结果表明,搭接件孔边裂纹Ⅰ型SIF起主导作用,Ⅱ型和Ⅲ型SIF可忽略不计。由于次弯曲、铆钉变形和板厚度等因素,SIF在外表面最小,接触面一侧较大,最大值多位于蒙皮内部。MSD会使裂纹间的干涉作用增强,SIF增大,且裂纹间距离越近干涉作用越强。裂纹长度相同时,埋头铆钉的孔边裂纹SIF积分均值大于平头铆钉,且接触面的SIF埋头铆钉大于平头铆钉,外表面则相反。     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.     

高性能纤维增强树脂基复合材料3D打印及其应用探索

纤维增强树脂基复合材料具有优异的力学性能,能够实现轻质、高性能结构的制造,但传统的成型工艺过程复杂、成本高,难以实现纤维回收利用,限制了纤维增强树脂基复合材料的广泛应用.3D打印技术是一种新兴的零件成形工艺,将3D打印技术应用于纤维增强树脂基复合材料的制造,为实现复合材料低成本、绿色制造提供了可能性.综述了纤维增强树脂基复合材料3D打印技术研究的发展现状,提出了一种高性能连续纤维增强热塑性复合材料3D打印工艺及其回收再制造策略.     

飞机维修大纲中的任务转移风险评估方法

以波音737NG飞机维修大纲为例,对其依据MSG—3决断逻辑制定的维修大纲中的任务转移风险进行模糊综合评价。使用模糊理论、层次分析法、熵权法和转移修正因子计算维修大纲中任务转移的风险概率值。结果表明,该值符合FAA和EASA的安全标准,方法可行。     

Nb/Nb5Si3微叠层材料及其制备技术

Nb/Nb5Si3合金是未来最具潜力的超高温结构材料,实现该材料的结构微叠层化是一种新颖的材料设计思路和制备方法.Nb/Nb5Si3微叠层材料是将Nb和Nb5Si3按一定的层间距及层厚比以ABABAB型交互重叠结构形成的多层材料,其几种典型的制备技术包括热压、等离子喷涂、磁控溅射和电子束物理气相沉积(EB-PVD).其中EB-PVD是一种最适合工程应用的Nb/Nb5Si3微叠层材料制备方法,结构和功能复合、纳米化叠层、高韧化工艺是EB-PVD技术制备Nb/Nb5Si3微叠层材料的发展方向.     

吸热型碳氢燃料RP-3替代模型研究

利用广义对应态法则对吸热型碳氢燃料RP-3的5种替代模型的密度、黏度、导热系数和比定压热容进行了数值计算.计算温度变化范围为300~800K,压力变化范围为3~6MPa.结果表明:不同替代模型均能定性重现RP-3在拟临界温度附近的物性急剧变化;由53%正十一烷,18%正丁基环己烷,29%1,3,5-三甲基苯组成的3组分替代模型在预测RP-3物性上表现最优,相对于实验数据,300~700K内密度相对误差均小于0.08;替代模型的相对分子质量越大,预测的拟临界温度越高,对拟临界温度下物性值的影响无显著规律.      

煤基喷气燃料在地面单管燃烧室内燃烧和排放特性研究

为研究煤基喷气燃料的燃烧和排放特性,通过改造的单管燃烧室评估了煤基喷气燃料和石油基RP-3喷气燃料的燃烧和排放特性差异.试验结果表明:煤基喷气燃料具有更加优异的贫油点火和贫油熄火性能,两种喷气燃料的燃烧和排放特性随燃油流量和燃烧室出口温度的改变呈现出一致的变化趋势,在相同质量流量下,煤基喷气燃料的燃烧和排放性能要低于RP-3,在相同燃烧室出口温度时,煤基喷气燃料燃烧时的壁温要低于RP-3.      

温度对飞机燃油射流泵工作特性影响

建立了射流泵数学模型,采用数值计算方法对其工作特性进行了模拟,搭建了实验台,采用RP-3燃油,通过实验数据验证了模型的正确性.在此基础上,分别选择了RP-3和JET-A两种燃油,计算了从-40℃~40℃温度下,不同操作压力对射流泵流量比的影响.结果表明:燃油温度高于0℃时,温度对射流泵工作特性影响并不明显,随着温度的降低,射流泵性能与标准温度下（20℃）偏差越来越大,且压比越高此偏差越明显.当温度高于0℃时,采用RP-3和JET-A燃油性能相差不大,RP-3燃油性能略优于JET-A燃油,但是在低温下,RP-3燃油性能远高于JET-A燃油.因此当燃油温度较低且压比较高时,必须充分考虑温度对射流泵特性的影响.