二维小波变换及其在医学图像处理中的应用

介绍了二维离散小波变换的一般形式，在图像分解的基础上．分析了二维小波变换在医学图像消噪和图像增强中的应用，同时给出应用实例。结果表明，应用小波分析进行医学图像处理，能够有效地改善图像质量，有利于医生对病情的诊断和治疗。     

大型航天器舱内流动与传热传质集成分析

在低流速、常温、层流假定下，利用数值模拟方法，实现了大型航天器返回舱、轨道舱内流动与传热传质分析．模拟结果表明，冷凝干燥组件、净化通风组件、风扇、热控风机和其他仪器设备对航天器舱内空气流动具有不同的影响；通过分析空气流场对舱内温度、空气湿度、二氧化碳浓度的影响，探讨了评价流场的质量和能量输运作用；从总体角度提出，通过一定的布局，设计出具有环流的全局流场的同时，具有流动与扩散相协调的局部流场，建立了统一流场的设计新思路．     

MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.     

亚音压气机平面叶栅内流动的声激励试验研究

针对非定常两代流型理论的验证展开了大量的试验研究工作.为了简化同时又能抓住问题的本质,试验研究首先从平面叶栅风洞上起步.在测得各个工况下叶栅后旋涡脱落特征频率的基础上,采用声激励的试验手段,系统研究了非定常扰动之间的相互作用.通过加激励前后总压损失的对比、流场特征参数频谱图的对比和具体气动参数的对比,证实了合理组织各个非定常扰动的相互作用可以提升叶栅的气动性能,说明了"非定常耦合流型"在叶轮机中存在的可能性.     

双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

复杂凸凹曲率飞机蒙皮充液成形技术研究与应用

随着飞机气动、隐身等性能要求的提高,飞机外形曲率更加异形化,大量应用复杂凸凹曲率蒙皮,传统的拉伸成形方法已经不能完全满足新一代飞机蒙皮加工的要求。基于生产某型号飞机复杂凸凹曲率蒙皮这一背景,介绍了充液成形基本原理及关键技术,利用有限元数值模拟方法,分析板材充液成形过程中液室压力、厚度减薄率、板材失稳及贴胎度的变化规律,优化工艺参数,并且根据数值模拟结果指导工业生产。理论分析和现场实践证明:充液成形技术为复杂凸凹曲率蒙皮零件的制造提供了新的工艺方法,满足新一代飞机的凸凹曲率外形蒙皮的制造要求。     

火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用，同时还将与火星表面航天器发生对流换热。热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响，从而确定主要的控温途径。在调研火星表面辐射、大气等热环境的基础上，从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响。器表辐射传热系数随光学属性和温度的变化范围为0.3～1.4W/(m2·℃)，对流传热系数随风速变化为0.2～1.5W/(m2·℃)，器内导热传热系数可控制在0.25W/(m2·℃)以下。结果表明，太阳辐射较火星表面和天空辐射而言是主要外热源，航天器表面的辐射和对流换热为两条并联换热途径，两者均可成为主要换热途径，器内导热传热是控制航天器内外隔热的主要可控因素。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。