一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

虚拟座舱环境头颈部sEMG采集相关肌肉研究

针对虚拟座舱环境下飞行员头部运动实时准确检测问题,在对头部运动特性进行分析的基础上,系统性地总结了人体头颈部sEMG信号采集的相关研究文献。针对头部突然旋转和俯仰运动,通过实验验证已有的sEMG信号采集方法,确定了利用sEMG信号进行头部运动检测时所需要研究的肌肉及准确的肌肉位置标识以及电极放置方法。     

一种组合体航天器帆板的光照遮挡计算新方法

提出了一种新的太阳帆板遮挡计算方法,用于组合体航天器的能量平衡分析与计算。根据航天器轴线与帆板转轴垂直的几何关系,将其沿轴线离散化为若干平面的集合,将所分析的帆板离散化为点集,判断离散点沿太阳矢量逆向是否经过离散的舱体平面或其它帆板平面,以此确定遮挡关系。通过仿真计算得到不同入射太阳方向下某组合体对应的遮挡区域,结果表明,新方法适用于轴对称形状组合体航天器的帆板遮挡分析。     

Performance improvement for constellation SAR using signal processing techniques

A new concept of spaceborne synthetic aperture radar (SAR) implementation has recently been proposed - the constellation of small spaceborne SAR systems. In this implementation, several formation-flying small satellites cooperate to perform multiple space missions. We investigate the possibility to produce high-resolution wide-area SAR images and fine ground moving-target indicator (GMTI) performance with constellation of small spaceborne SAR systems. In particular, we focus on the problems introduced by this particular SAR system, such as Doppler ambiguities, high sparseness of the satellite array, and array element errors. A space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is proposed which can solve these problems to some extent. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing effect caused by the lower pulse-repetition frequency (PRF) and thereby retrieve the unambiguous azimuth wide (full) spectrum signals from the received echoes. Following this operation, conventional SAR data processing tools can be applied to focus the SAR images fully. The proposed approach can simultaneously achieve both high-resolution SAR mapping of wide ground scenes and GMTI with high efficiency. To obtain array element errors, an array auto-calibration technique is proposed to estimate them based on the angular and Doppler ambiguity analysis of the clutter echo. The optimizing of satellite formations is also analyzed, and a platform velocity/PRF criterion for array configurations is presented. An approach is given to make it possible that almost any given sparse array configuration can satisfy the criterion by slightly adjusting the PRF. Simulated results are presented to verify the effectiveness of the proposed approaches.     

莲花湖曲径尽头的深幽

眼前的折多山让人无法忍受，海拔4280米的垭口淹没在汽车尾气和鼎沸人声之中。有人在攀援佛塔，有人在抓扯风马旗，雪坡上满是豪气干云的征服者嘴脸．著名的康藏第一关正以它汉藏界山的博大胸怀接纳无知游人．没办浩．今天是伟大的五月一日，山洪般的旅游大潮从城市席卷而至，湮没郊野，淫没乡镇，湮没崇山峻岭，所及之处皆为沼国．     

高压水切割技术

复合材料的机械加工是一个特殊的问题.本文论述了用高压水切割技术对复合材料加工的原理和优点,简要说明了切割设备的组成,给出了主要的理论计算方法,并用实验数据进行了比较.最后指出了该技术的应用领域的扩展及其前景.     

角振动校准装置研究

为提升对惯性器件的动态性能评价能力,通过对被校传感器施加标准正弦角振动激励,精确测量角振动过程,实现了对角振动传感器的校准。基于不同频段的特点,将校准频段划分为低频和高频2部分,并提出空气轴承与无刷直流力矩电机相结合的低频角振动台方案,以及轻质空心杯精密空气轴承与框式电磁驱动结构相结合的高频角振动台方案;分别采用精密角度编码器和衍射光栅激光干涉仪实现对低频和高频角振动的测量,成功研制出频率范围为0.25~550Hz、角加速度范围为0.1~1 760rad/s2以及角速度波形失真小于2%的角振动绝对法校准装置。与德国国家物理技术研究院的角振动校准装置相比,该装置能够显著提升承载能力,可广泛用于惯性器件动态性能的测试与评价。     

出口马赫数分布可控的二元高超进气道双重反设计

在出口马赫数分布预先给定的前提下,利用二维有旋特征线理论实现了压缩面马赫数分布可控的两弯曲激波和三弯曲激波高超二元进气道反设计。数值计算结果表明,设计点时,无粘条件下两种反设计方法均能实现预设出口马赫数分布,有粘条件下反设计的进气道出口主流区马赫数分布与预设分布吻合较好,接力点时出口主流区马赫数仍然保持较好的均匀性。以上结果说明这两种反设计方法均是正确可行的。设计条件下,在捕获高度、无粘出口高度、设计无粘总压恢复系数和装配点处流动参数均相同时,两弯曲激波反设计方法波系简单、有粘接力点流量系数较三弯曲激波高10.2%;三弯曲激波反设计方法有粘时内收缩比较前者小17%,设计点和接力点时总压恢复系数分别较前者高2.9%和2%。     

不同类型多级等离子体激励器诱导气流的力学特性研究

等离子体激励器通过产生的等离子加速气流,可以实现对流动的控制。单级等离子体激励器由于受到等离子体放电的物理限制,其控制作用较小;为了提高等离子体流动控制的效果,关于多级等离子体激励器的研究得到发展。采用图像采集和粒子示踪测速系统(PIV),对传统多级等离子体激励器和多级双极性等离子体激励器的放电现象以及气流加速进行研究,并通过流场速度分布计算等离子体激励器对空气产生的推力和吸力。结果表明:随着电压的升高,传统多级等离子体激励器产生的推力和吸力会逐渐减弱;而多级双极性等离子体激励器产生的推力和吸力均呈逐渐增强的趋势。