Folding patterns of planar gossamer space structures consisting of membranes and booms

The combination of large membranes and light-weight deployable booms, often called a gossamer structure, has enabled innovative space missions, such as solar sailing, to become possible. Though many designs have been proposed and demonstrated, two problems remain regarding the folding patterns of the membranes. The first problem involves considering the thickness of a membrane to enable uniform and compact folding. The other involves membrane-folding patterns that allow for connecting the membrane to the booms at multiple points and deploying them together while minimizing the use of complex mechanisms. This study proposes three methods that consider the thickness, and two of them can keep the crease lines straight, in contrast to the conventional non-straight crease line solutions. In addition, this study derives one effective design to integrate a membrane with diagonal booms through the systematic classification of existing membrane folding patterns.     

Research and development of On-Board Processor for advanced mobile satellite communications

This paper describes the research and development of an On-Board Processor (OBP) for a mobile satellite communications system using a geostationaly satellite. The system, which based on Multi-Carrier Time Division Multiple Access, can realize high performance and facilitate the use of miniature hand-held mobile Earth terminals.

Our research and development results indicate as follows.

1. 1) The simultaneous-slot switching method will be the most suitable for an on-board base-band switching with consideration of traffic capacity, time delay, and hardware scale.

2. 2) The OBP performs channel exchange with regeneration that contributes to a reduction in the size of mobile terminals because of the coding gain.

3. 3) Many kinds of Application Specific Integrated Circuits are designed to realize large channel capacity and reduce the size and power consumption of the OBP. These OBP design can increase the channel capacity, which is equivalent to in 5.6kbps voice channel, up to over 500 channels within 5MHz frequency band

Some results are applied to the OBP being developed for the Japanese Engineering Test Satellite VII (ETS-VB).     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

The BepiColombo/MMO model payload and operation plan

The Institute of Space and Astronautical Science (ISAS) of Japan plans to contribute the Mercury Magnetospheric Orbiter (MMO) to the BepiColombo program, the ESA Cornerstone mission to the planet Mercury. The principal objective of the MMO is to study the magnetic field and magnetosphere of Mercury. The ISAS Mercury exploration working group has performed the definition study of the MMO mission in cooperation with the ESA/ESTEC BepiColombo project team. This paper briefly reviews the scientific objectives, and describes the model payload and its operation plan.     

An Lms Adaptive Array Using a Pilot Signal

A least mean square (LMS) adaptive array requires a reference signal. When the desired signal contains a pilot signal, it may be used as the reference signal. In this paper the steady-state performance of an LMS adaptive array in which the pilot signal is used as the reference signal is examined. It is shown that the LMS adaptive array occasionally suppresses the desired signal. The loop gain, which is an important parameter, is also considered.     

Polar ionospheric disturbance effects on NNSS satellite positioning

From the analysis of the United States Navy navigation satellite system (NNSS) positioning data of about 10000 passes, it is clearly found that polar ionospheric disturbance affects the positioning. The positioning error increases with increasing geomagnetic disturbance level (local K-index), and the pass number of position fixes decreases by one or two per day when the K-index is large. These effects may arise from the spatial gradients of electron density and/or the radio wave scattering due to well-developed ionospheric irregularities inherent to the disturbed auroral ionosphere     

Data Processing at KAGUYA Operation and Analysis Center

The functions of KAGUYA(SELENE) Operation and Analysis Center (SOAC) are to operate three satellites: the main orbiter KAGUYA and two small satellites, Relay satellite OKINA and VRAD (VLBI (Very Long Baseline Interferometry) RADio source) satellite OUNA; and to process, archive and provide mission data. SOAC has two main functional areas, “Tracking and Control system” and “Mission Operation and Data Analysis system.” The former is for operational planning of bus and mission instruments including satellite navigation, and for the implementation of those plans and for the evaluation of satellite conditions. The latter is the system that processes, archives and provides mission data, and which principal investigators use to generate higher-level data products. Data up to the end of the operation in June 2009 have been processed and the total amount of Level-2 data products reaches about 50 TB. The data products have been released to the public since November 2009.     

JUXTA: A new probe of X-ray emission from the Jupiter system

For the future Japanese exploration mission of the Jupiter’s magnetosphere (JMO: Jupiter Magnetospheric Orbiter), a unique instrument named JUXTA (Jupiter X-ray Telescope Array) is being developed. It aims at the first in-situ measurement of X-ray emission associated with Jupiter and its neighborhood. Recent observations with Earth-orbiting satellites have revealed various X-ray emission from the Jupiter system. X-ray sources include Jupiter’s aurorae, disk emission, inner radiation belts, the Galilean satellites and the Io plasma torus. X-ray imaging spectroscopy can be a new probe to reveal rotationally driven activities, particle acceleration and Jupiter–satellite binary system. JUXTA is composed of an ultra-light weight X-ray telescope based on micromachining technology and a radiation-hard semiconductor pixel detector. It covers 0.3–2 keV with the energy resolution of <100 eV at 0.6 keV. Because of proximity to Jupiter (∼30 Jovian radii at periapsis), the image resolution of <5 arcmin and the on-axis effective area of >3 cm² at 0.6 keV allow extremely high photon statistics and high resolution observations.     

A mesospheric ozone profile at sunset

An altitude profile of the ozone concentration from 55 to 95 km was measured at sunset in January by simultaneous measurements of the 1.27 μm radiation and the solar UV radiation using rocket-borne radiometers at Uchinoura, Japan (31°N). The ozone profiles deduced by two different methods agree with each other at approximately 70 km. The profile was consistent with our previous results obtained at the same station in September, and with the sunset profile obtained at Wallops Island (38°N) during the WMO/FAA/NASA international ozone rocketsonde intercomparison. Our data show no seasonal variation of ozone in the 55 – 95 km region at Uchinoura.     

Upper Bound of a Loop Gain in a Power Inversion Adaptive Array

A loop gain is an important parameter in a power inversion adaptive array. The upper bound value of the loop gain is obtained which prevents the array suppressing a desired signal seriously. This result is very useful for determining the loop gain.