Analysis of electromagnetic and electrostatic effects of particle impacts on spacecraft

Particle impacts on spacecraft can cause considerable damage, even leading to complete failure. A theory for the resulting vehicle potential changes and the electromagnetic radiation from impact-induced plasma has been published by Close et al. (2010). Here we compare this theory to impacts registered by the Radio and Plasma Wave Science instrumentation on the Cassini spacecraft. We study both low-velocity (16 km/s) large particles (2.6 μm radius) detected in Saturn’s rings and high-velocity (450 km/s) small particles (1 nm radius) in the solar wind. The agreement with the theory is quite good. We also apply these results to earth orbit and conclude that both Electrostatic Discharge and Electromagnetic Pulse radiation are likely and could lead to spacecraft failure.     

Lunar ground penetrating radar: Minimizing potential data artifacts caused by signal interaction with a rover body

Ground-penetrating radar (GPR) is the leading geophysical candidate technology for future lunar missions aimed at mapping shallow stratigraphy (<5 m). The instrument’s exploration depth and resolution capabilities in lunar materials, as well as its small size and lightweight components, make it a very attractive option from both a scientific and engineering perspective. However, the interaction between a GPR signal and the rover body is poorly understood and must be investigated prior to a space mission. In doing so, engineering and survey design strategies should be developed to enhance GPR performance in the context of the scientific question being asked. This paper explores the effects of a rover (simulated with a vertical metal plate) on GPR results for a range of heights above the surface and antenna configurations at two sites: (i) a standard GPR testing site with targets of known position, size, and material properties, and; (ii) a frozen lake for surface reflectivity experiments. Our results demonstrate that the GPR antenna configuration is a key variable dictating instrument design, with the XX polarization considered optimal for minimizing data artifact generation. These findings could thus be used to help guide design requirements for an eventual flight instrument.     

Modeling of the outer heliosphere with the realistic solar cycle

Time-dependent kinetic-continuum model of the solar wind interaction with the two-component local interstellar cloud (LIC) has been developed recently [Izmodenov, V., Malama, Y.G., Ruderman, M.S. Solar cycle influence on the interaction of the solar wind with local interstellar cloud. Astron. Astrophys. 429, 1069–1080, 2005a.]. Here, we adopted this model to the realistic solar cycle, when the solar wind parameters at the Earth’s orbit are taken from space data. This paper focuses on the results related to the termination shock (TS) excursion with the solar cycle that may help to understand Voyager 1 data obtained at and after the crossing of the termination shock and to predict the time of the TS crossing by Voyager 2.     

Multipath Channel Model for Over-Water Aeronautical Telemetry

A multipath propagation model for aeronautical telemetry over water at 8.0 GHz is presented. Data recorded during channel sounding experiments, conducted over the Pacific Ocean near Point Mugu, CA was used to model the multipath propagation. The modeling results show that a three-ray model consisting of line-of-sight propagation and two reflected propagation paths is a good fit for the measured channel frequency responses. One of the reflected propagation paths is a strong specular reflection determined by the geometry defined by the airborne transmitter, the ground-based receiver, and the sea surface. For the flight profiles used, the delay of this path is between 10 and 50 ns. The other propagation path is a more diffuse, random reflection whose amplitude is significantly smaller than the amplitude of the specular reflection and whose mean excess delay is 57 ns with an rms delay spread of 25 ns.     

Progress in demonstrating homochiral selection in prebiotic RNA synthesis

The dual properties of RNA as an enzyme catalyst (ribozyme) and its ability to store genetic information suggest that early life could have been based on RNA. We have synthesized RNA oligomers up to 50-mer chain lengths by Na⁺-montmorillonite catalyzed reactions of 5′-activated mononucleotides. For studying chiral selectivity, the reactions of racemic mixtures of D, L-ImpA and D, L-ImpU were carried out on Na⁺-montmorillonite. The dimer, trimer, tetramer and pentamer fractions (yields 43.3%, 14.5%, 5.8% and 3.0%, respectively) were investigated for homochiral selection. These products were collected via ion exchange HPLC, their terminal 5′-phosphate was cleaved by alkaline phosphatase and further analyzed by reverse phase HPLC. Twelve linear and three cyclic dimers were isolated and characterized. The homochirality of dimers was 63.5 ± 0.8%. Out of the sixteen trimers isolated, ten were homochiral with an overall homochirality of 74.2 ± 1.6%. The tetramers and pentamers were separated into 24 and 20 isomers, respectively. Their co-elution with those formed in the binary reactions of D-ImpA with D-ImpU on Na⁺-montmorillonite revealed 92.7 ± 2.0% and 97.2 ± 0.5% homochirality, respectively. These results suggest that Na⁺-montmorillonite not only catalyzes the prebiotic synthesis of RNA but it also facilitates homochiral selection. Work is in progress to determine chiral selectivity in the reaction mixtures of activated nucleotides of racemic A, U, G and C on Na⁺-montmorillonite.     

回归到朴素的真正艺术 《艺术家》影评

<正>2012年,横扫奥斯卡三大重要奖项的是一批黑马,一部与其他竞争影评显得格格不入的艺术片《艺术家》。这是法国著名导演迈克尔·啥扎纳维希乌斯的大胆尝试,因为《艺术家》是一部默片。《艺术家》以黑白默片的表现形式拍摄,音乐、字卡交代剧情,音效、双关阐述默片与有声片的艺术形式与角色关系,值得玩味。片头衬着传统配乐的字幕图案来呈现演职员名单。以一段     

The first SETI observations with the Allen telescope array

The Search for ExtraTerrestrial Intelligence (SETI) finally has its own full-time telescope. The Allen telescope array (ATA) in Northern California was dedicated on October 11, 2007. This array, which will eventually be composed of 350 small radio antennas, each 6.1 m in diameter, is being built as a partnership between the SETI Institute and the University of California Radio Astronomy Laboratory. Last October, Paul G. Allen (who provided the funds for the technology development and the first phase of array construction) pushed a silver button and all 42 antennas of the current ATA-42 slewed to point in the direction of the distant galaxy M81. Specialized electronic backend detectors attached to the ATA began making a radio map of that galaxy and simultaneously began SETI observations of HIP48573, a G5V star near M81 on the sky and a distance of 264 light years from Earth. The Allen telescope array will greatly improve the speed of conducting SETI searches over the next few decades, and it will allow a suite of different search strategies to be undertaken. This paper summarizes some of the earliest SETI observations from the array, and describes the search strategies currently being planned.     

Technology development for a long duration,mid-cloud level Venus balloon

This paper describes the results of ongoing technology development activities for a Venus spherical superpressure balloon capable of flying for long durations (30 days) in the middle cloud layer at an altitude of 55.5 km. Data is presented from a successful aerial deployment and inflation flight experiment on a 5.5 m diameter prototype balloon conducted at a 2.5 km altitude above the Earth. Although the balloon in that test was not released for free flight, all other steps in the deployment and inflation process were successfully executed. Experimental and computational results are also presented from an investigation of the stress concentration phenomenon at the junction of the metal end fitting and fabric end cap of the prototype Venus balloon. Good agreement was found between the simulation and experimental results and a stress concentration factor of 1.55 determined for this end cap design compared to the expectations of thin membrane theory. Finally, results are presented for a new, second-generation Venus balloon material utilizing Aclar™ film instead of Teflon. Optical property and sulfuric acid tolerance data are presented for this material based on laboratory testing of samples.     

Fuzzy multi-criteria decision-making approach to prioritization of space debris for removal

As private companies and government space agencies begin to seriously consider the task of active space debris removal, it is becoming increasingly more important to determine the highest priority objects to deorbit. This work sets forth an approach for prioritization of space debris through the utilization of Multi-Criteria Decision-Making methodologies and fuzzy logic, as well as both quantitative and qualitative criteria. The proposed debris prioritization approach considers various criteria including the orbit, size, mass, pairwise and total collision probabilities, and decay timeframe of each debris object. The means of assigning attributes to each assessment criterion is discussed in detail. To determine the weighting scheme for the criteria, a questionnaire was prepared and shared with experts in the field of space situational awareness. The work examines over two thousand critical debris objects selected from the existing debris catalog with respect to these criteria. The quantified attributes for each debris object are then aggregated through the fuzzy versions of the Analytic Hierarchy Process and the Technique for Order Preference by Similarity to Ideal Solution. The results of the analysis identify high-priority debris objects for removal from Earth-bound orbits.