Advanced materials for space applications

Since NASA was created in 1958, over 6400 patents have been issued to the agency—nearly one in a thousand of all patents ever issued in the United States. A large number of these inventions have focused on new materials that have made space travel and exploration of the moon, Mars, and the outer planets possible. In the last few years, the materials developed by NASA Langley Research Center embody breakthroughs in performance and properties that will enable great achievements in space. The examples discussed below offer significant advantages for use in small satellites, i.e., those with payloads under a metric ton. These include patented products such as LaRC SI, LaRC RP 46, LaRC RP 50, PETI-5, TEEK, PETI-330, LaRC CP, TOR-LM and LaRC LCR (patent pending). These and other new advances in nanotechnology engineering, self-assembling nanostructures and multifunctional aerospace materials are presented and discussed below, and applications with significant technological and commercial advantages are proposed.     

A Comparison of Second, Third, and Fourth Order Phase-Locked Loops

This paper presents data describing various performance characteristics of phase-locked loops, which were obtained for the purpose of determining an optimum selection of system order in view of typical operating conditions. With the functions optimized with respect to particular performance characteristics, calculations of the integrated square error and peak error with polynomial inputs are presented in terms of the noise bandwidth; and the generalized error coefficients are also provided in terms of the bandwidth with consideration for the use of both perfect and imperfect integrators. With specific input functions as provided by signals transmitted from earth satellites, an improved performance is demonstrated with the use of the higher order loops, and experimental results verify the calculations and also demonstrate the feasibility of the fourth order loop design.     

Refraction Error in Measurement of Angle of Arrival with the Radio Interferometer

The ``extra-path' error in the measurement of angle of arrival with the radio interferometer is analyzed as a function of target coordinates and baseline B for an exponential atmosphere. By treating the error rather than the measurement and by formulating the error in terms of well-known radar refraction parameters, the necessity for numerical integrations characteristic of earlier approaches is avoided. The table of computed errors shows that angle of arrival can be measured to an accuracy of 0.01 mrad for B?500 meters.     

Instrument Boom Mechanisms on the THEMIS Satellites; Magnetometer, Radial Wire, and Axial Booms

The five “Time History of Events and Macroscale Interactions during Substorms” (THEMIS) micro-satellites launched on a common carrier by a Delta II, 7925 heavy, on February 17, 2007. This is the fifth launch in the NASA MeDIum class EXplorer (MIDEX) program. In the mission proposal the decision was made to have the University of California Berkeley Space Sciences Laboratory (UCB-SSL) mechanical engineering staff provide all of the spacecraft appendages, in order to meet the short development schedule, and to insure compatibility. This paper describes the systems engineering, design, development, testing, and on-orbit deployment of these boom systems that include: the 1 and 2 meter carbon fiber composite magnetometer booms, the 40 and 50 m tip to tip orthogonal spin-plane wire boom pairs, and the 6.3 m dipole stiff axial booms.     

Crater detection via genetic search methods to reduce image features

Recent approaches to crater detection have been inspired by face detection’s use of gray-scale texture features. Using gray-scale texture features for supervised machine learning crater detection algorithms provides better classification of craters in planetary images than previous methods. When using Haar features it is typical to generate thousands of numerical values from each candidate crater image. This magnitude of image features to extract and consider can spell disaster when the application is an entire planetary surface. One solution is to reduce the number of features extracted and considered in order to increase accuracy as well as speed. Feature subset selection provides the operational classifiers with a concise and denoised set of features by reducing irrelevant and redundant features. Feature subset selection is known to be NP-hard. To provide an efficient suboptimal solution, four genetic algorithms are proposed to use greedy selection, weighted random selection, and simulated annealing to distinguish discriminate features from indiscriminate features. Inspired by analysis regarding the relationship between subset size and accuracy, a squeezing algorithm is presented to shrink the genetic algorithm’s chromosome cardinality during the genetic iterations. A significant increase in the classification performance of a Bayesian classifier in crater detection using image texture features is observed.     

Talking space: The European Commission's changing frames in defining Galileo

This paper traces the way in which the European Commission has framed and reframed the issue of EU satellite navigation over 20 years. It investigates how the EU's agenda-setter has ‘talked about’ space policy, with a particular focus on Galileo, and how its own institutional discourse – as revealed in its communications throughout the agenda-setting stage of Galileo's ‘definition’ phase – evolved in the 1990s through the use of ‘frame sets’. In so doing, it illustrates the ways in which, over time, the EU's executive has ‘projected’ the issue of independent satellite navigation capabilities as being politically and economically desirable for Europe, and has sought to persuade decision makers of its cross-policy relevance and potential economic, social and security benefits. The article deconstructs official documents and engages in a close-up analysis of policy formulation, to identify nascent, evolving and mature frames in the definition of Galileo.     

先进机身结构和材料设计

由于大型商用飞机机身结构的复杂性,其碳纤维复合材料部件的设计、制造和取证都不能借用现有的制造维修基本经验.碳纤维复合材料机身壁板超越了现代化金属技术,对应力应变的保守限制要求必须保证将具有损伤容限的机身结构交付到航空公司.这样,碳纤维复合材料壁板技术的应用至少限制了新飞机家族第一代成员的重量.     

Determination of Angular Distribution Models for Indian desert scene: Comparison with other desert models

In this paper, the shortwave and longwave anisotropy for clear sky Indian desert scene has been estimated using long-term surface data, radiative transfer calculations and Helmholtz reciprocity for missing values. This study is important in the perspective of the low inclination satellites like Megha–Tropiques (MT) mission, carrying Scanner for Radiation Budget (ScaRaB) payload, which will provide broadband radiative fluxes at the top of the atmosphere (TOA). Due to low inclination angle, the angular models for clear sky land scenes for the MT-ScaRaB orbits will be dominated by desert points.The Angular Distribution Models (ADMs) determined in this study were compared with existing desert models. It is observed that for longwave radiation, the largest disagreement is observed for higher values of viewing zenith angle, especially for the summer season, where the difference in flux can reach up to 13 W/m². For the shortwave radiation, higher values of both solar zenith angle and viewing zenith angle cause largest incongruity in the computed albedo from the different models, suggesting the need of caution in interpretation of the flux computations from these bins. In fact at the higher solar zenith angle bin, the disparity in albedo can go up to 6.4%.     

Exposure of Arabidopsis thaliana to hypobaric environments: implications for low-pressure bioregenerative life support systems for human exploration missions and terraforming on Mars

Understanding how hypobaria can affect net photosynthetic (P (net)) and net evapotranspiration rates of plants is important for the Mars Exploration Program because low-pressured environments may be used to reduce the equivalent system mass of near-term plant biology experiments on landers or future bioregenerative advanced life support systems. Furthermore, introductions of plants to the surface of a partially terraformed Mars will be constrained by the limits of sustainable growth and reproduction of plants to hypobaric conditions. To explore the effects of hypobaria on plant physiology, a low-pressure growth chamber (LPGC) was constructed that maintained hypobaric environments capable of supporting short-term plant physiological studies. Experiments were conducted on Arabidopsis thaliana maintained in the LPGC with total atmospheric pressures set at 101 (Earth sea-level control), 75, 50, 25 or 10 kPa. Plants were grown in a separate incubator at 101 kPa for 6 weeks, transferred to the LPGC, and acclimated to low-pressure atmospheres for either 1 or 16 h. After 1 or 16 h of acclimation, CO(2) levels were allowed to drawdown from 0.1 kPa to CO(2) compensation points to assess P (net) rates under different hypobaric conditions. Results showed that P (net) increased as the pressures decreased from 101 to 10 kPa when CO(2) partial pressure (pp) values were below 0.04 kPa (i.e., when ppCO2 was considered limiting). In contrast, when ppCO(2) was in the nonlimiting range from 0.10 to 0.07 kPa, the P (net) rates were insensitive to decreasing pressures. Thus, if CO(2 )concentrations can be kept elevated in hypobaric plant growth modules or on the surface of a partially terraformed Mars, P (net) rates may be relatively unaffected by hypobaria. Results support the conclusions that (i) hypobaric plant growth modules might be operated around 10 kPa without undue inhibition of photosynthesis and (ii) terraforming efforts on Mars might require a surface pressure of at least 10 kPa (100 mb) for normal growth of deployed plant species.