Surface characteristics of spacecraft components affect the aggregation of microorganisms and may lead to different survival rates of bacteria on Mars landers

Layers of dormant endospores of Bacillus subtilis HA101 were applied to eight different spacecraft materials and exposed to martian conditions of low pressure (8.5 mbar), low temperature (-10 degrees C), and high CO(2) gas composition and irradiated with a Mars-normal ultraviolet (UV-visible- near-infrared spectrum. Bacterial layers were exposed to either 1 min or 1 h of Mars-normal UV irradiation, which simulated clear-sky conditions on equatorial Mars (0.1 tau). When exposed to 1 min of Mars UV irradiation, the numbers of viable endospores of B. subtilis were reduced three to four orders of magnitude for two brands of aluminum (Al), stainless steel, chemfilm-treated Al, clear-anodized Al, and black-anodized Al coupons. In contrast, bacterial survival was reduced only one to two orders of magnitude for endospores on the non-metal materials astroquartz and graphite composite when bacterial endospores were exposed to 1 min of Mars UV irradiation. When bacterial monolayers were exposed to 1 h of Mars UV irradiation, no viable bacteria were recovered from the six metal coupons listed above. In contrast, bacterial survival was reduced only two to three orders of magnitude for spore layers on astroquartz and graphite composite exposed to 1 h of Mars UV irradiation. Scanning electron microscopy images of the bacterial monolayers on all eight spacecraft materials revealed that endospores of B. subtilis formed large aggregates of multilayered spores on astroquartz and graphite composite, but not on the other six spacecraft materials. It is likely that the formation of multilayered aggregates of endospores on astroquartz and graphite composite is responsible for the enhanced survival of bacterial cells on these materials.     

Adaptive mesh refinement computation of acoustic radiation from an engine intake

A block-structured adaptive mesh refinement (AMR) method was applied to the computational problem of acoustic radiation from an aeroengine intake. The aim is to improve the computational and storage efficiency in aeroengine noise prediction through reduction of computational cells. A parallel implementation of the adaptive mesh refinement algorithm was achieved using message passing interface. It combined a range of 2nd- and 4th-order spatial stencils, a 4th-order low-dissipation and low-dispersion Runge–Kutta scheme for time integration and several different interpolation methods. Both the parallel AMR algorithms and numerical issues were introduced briefly in this work. To solve the problem of acoustic radiation from an aeroengine intake, the code was extended to support body-fitted grid structures. The problem of acoustic radiation was solved with linearised Euler equations. The AMR results were compared with the previous results computed on a uniformly fine mesh to demonstrate the accuracy and the efficiency of the current AMR strategy. As the computational load of the whole adaptively refined mesh has to be balanced between nodes on-line, the parallel performance of the existing code deteriorates along with the increase of processors due to the expensive inter-nodes memory communication costs. The potential solution was suggested in the end.     

X-rays from the first massive black holes

X-ray studies of high-redshift (z > 4) active galaxies have advanced substantially over the past few years, largely due to results from the new generation of X-ray observatories. As of this writing X-ray emission has been detected from nearly 60 high-redshift active galaxies. This paper reviews the observational results and their implications for models of the first massive black holes, and it discusses future prospects for the field.     

The Cassini Ion and Neutral Mass Spectrometer (INMS) Investigation

The Cassini Ion and Neutral Mass Spectrometer (INMS) investigation will determine the mass composition and number densities of neutral species and low-energy ions in key regions of the Saturn system. The primary focus of the INMS investigation is on the composition and structure of Titan’s upper atmosphere and its interaction with Saturn’s magnetospheric plasma. Of particular interest is the high-altitude region, between 900 and 1000 km, where the methane and nitrogen photochemistry is initiated that leads to the creation of complex hydrocarbons and nitriles that may eventually precipitate onto the moon’s surface to form hydrocarbon–nitrile lakes or oceans. The investigation is also focused on the neutral and plasma environments of Saturn’s ring system and icy moons and on the identification of positive ions and neutral species in Saturn’s inner magnetosphere. Measurement of material sputtered from the satellites and the rings by magnetospheric charged particle and micrometeorite bombardment is expected to provide information about the formation of the giant neutral cloud of water molecules and water products that surrounds Saturn out to a distance of ∼12 planetary radii and about the genesis and evolution of the rings.The INMS instrument consists of a closed ion source and an open ion source, various focusing lenses, an electrostatic quadrupole switching lens, a radio frequency quadrupole mass analyzer, two secondary electron multiplier detectors, and the associated supporting electronics and power supply systems. The INMS will be operated in three different modes: a closed source neutral mode, for the measurement of non-reactive neutrals such as N₂ and CH₄; an open source neutral mode, for reactive neutrals such as atomic nitrogen; and an open source ion mode, for positive ions with energies less than 100 eV. Instrument sensitivity is greatest in the first mode, because the ram pressure of the inflowing gas can be used to enhance the density of the sampled non-reactive neutrals in the closed source antechamber. In this mode, neutral species with concentrations on the order of ≥10⁴ cm⁻³ will be detected (compared with ≥10⁵ cm⁻³ in the open source neutral mode). For ions the detection threshold is on the order of 10⁻² cm⁻³ at Titan relative velocity (6 km sec⁻¹). The INMS instrument has a mass range of 1–99 Daltons and a mass resolutionM/ΔM of 100 at 10% of the mass peak height, which will allow detection of heavier hydrocarbon species and of possible cyclic hydrocarbons such as C₆H₆.The INMS instrument was built by a team of engineers and scientists working at NASA’s Goddard Space Flight Center (Planetary Atmospheres Laboratory) and the University of Michigan (Space Physics Research Laboratory). INMS development and fabrication were directed by Dr. Hasso B. Niemann (Goddard Space Flight Center). The instrument is operated by a Science Team, which is also responsible for data analysis and distribution. The INMS Science Team is led by Dr. J. Hunter Waite, Jr. (University of Michigan).This revised version was published online in July 2005 with a corrected cover date.     

Structured methods for identifying and correcting potential human errors in space operations

Human performance plays a significant role in the development and operation of any complex system, and human errors are significant contributors to degraded performance, incidents, and accidents for technologies as diverse as medical systems, commercial aircraft, offshore oil platforms, nuclear power plants, and space systems. To date, serious accidents attributed to human error have fortunately been rare in space operations. However, as flight rates go up and the duration of space missions increases, the accident rate could increase unless proactive action is taken to identity and correct potential human errors in space operations. The Idaho National Engineering and Environmental Laboratory (INEEL) has developed and applied structured methods of human error analysis to identify potential human errors, assess their effects on system performance, and develop strategies to prevent the errors or mitigate their consequences. These methods are being applied in NASA-sponsored programs to the domain of commercial aviation, focusing on airplane maintenance and air traffic management. The application of human error analysis to space operations could contribute to minimize the risks associated with human error in the design and operation of future space systems.     

Quality characteristics of the radish grown under reduced atmospheric pressure

This study addresses whether reduced atmospheric pressure (hypobaria) affects the quality traits of radish grown under such environments. Radish (Raphanus sativus L. cv. Cherry Bomb Hybrid II) plants were grown hydroponically in specially designed hypobaric plant growth chambers at three atmospheric pressures; 33, 66, and 96 kPa (control). Oxygen and carbon dioxide partial pressures were maintained constant at 21 and 0.12 kPa, respectively. Plants were harvested at 21 days after planting, with aerial shoots and swollen hypocotyls (edible portion of the radish referred to as the “root” hereafter) separated immediately upon removal from the chambers. Samples were subsequently evaluated for their sensory characteristics (color, taste, overall appearance, and texture), taste-determining factors (glucosinolate and soluble carbohydrate content and myrosinase activity), proximate nutrients (protein, dietary fiber, and carbohydrate) and potential health benefit attributes (antioxidant capacity). In roots of control plants, concentrations of glucosinolate, total soluble sugar, and nitrate, as well as myrosinase activity and total antioxidant capacity (measured as ORAC_FL), were 2.9, 20, 5.1, 9.4, and 1.9 times greater than the amount in leaves, respectively. There was no significant difference in total antioxidant capacity, sensory characteristics, carbohydrate composition, or proximate nutrient content among the three pressure treatments. However, glucosinolate content in the root and nitrate concentration in the leaf declined as the atmospheric pressure decreased, suggesting perturbation to some nitrogen-related metabolism.     

Solar EUV energy budget of the thermosphere

Using the accumulation of experimental data and theoretical studies conducted on the terrestrial thermosphere since the mid seventies, we have re-evaluated the channels by which solar UV energy is transferred to the atmosphere. As an outcome of this evaluation we have redetermined the solar EUV heating efficiency for the thermosphere and find this to be considerably different from that established in earlier studies. The heating efficiency has strong altitude, solar cycle and diurnal dependencies. The values of this parameter vary from less than 10% to greater than 100%, with peak midday values of 50–55% In recent papers we have presented the results of this new UV heating efficiency determination using a steady state solution of the ionospheric model. In this paper we present the results obtained solving a time dependent model over a diurnal cycle. The time dependent effects are found to be significant, with certain longlived species acting as temporary reservoirs of latent heat that is released to the neutral atmosphere at later times.     

Three dimensional spatial memory and learning in real and virtual environments

Human orientation and spatial cognition partlydepends on our ability to remember sets ofvisual landmarks and imagine their relationshipto us from a different viewpoint. We normallymake large body rotations only about a singleaxis which is aligned with gravity. However,astronauts who try to recognize environmentsrotated in 3 dimensions report that theirterrestrial ability to imagine the relativeorientation of remembered landmarks does noteasily generalize. The ability of humansubjects to learn to mentally rotate a simplearray of six objects around them was studied in1-G laboratory experiments. Subjects weretested in a cubic chamber (n = 73) and aequivalent virtual environment (n = 24),analogous to the interior of a space stationnode module. A picture of an object waspresented at the center of each wall. Subjectshad to memorize the spatial relationships amongthe six objects and learn to predict thedirection to a specific object if their bodywere in a specified 3D orientation. Percentcorrect learning curves and response times weremeasured. Most subjects achieved high accuracyfrom a given viewpoint within 20 trials,regardless of roll orientation, and learned asecond view direction with equal or greaterease. Performance of the subject group thatused a head mounted display/head tracker wasqualitatively similar to that of the secondgroup tested in a physical node simulator. Body position with respect to gravity had asignificant but minor effect on performance ofeach group, suggesting that results may alsoapply to weightless situations. A correlationwas found between task performance measures andconventional paper-and-pencil tests of fieldindependence and 2&3 dimensional figurerotation ability.     

Development and chromosome mechanics in nematodes: results from IML-1.

A subset of the Caenorhabditis elegans nematodes flown aboard Biorack on IML-1 was analyzed for the fidelity of development and the mechanics of chromosomes at meiosis. To assess meiosis, mutant worms marked at two linked or unlinked loci were inoculated as heterozygous hermaphrodites and allowed to self fertilize. Mendelian segregation ratios and recombination frequency were measured for offspring produced at 1XG or in microgravity. To assess development, worms and embryos were fixed and stained with the DNA dye, DAPI, or antibodies specific for antigens expressed in germ cells, pharyngeal and body wall muscles, and gut cells. The distribution of cytoplasmic determinants, cell nuclei counts and positions were scored to assess symmetry relations and anatomical features.