MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.     

利用MF雷达对耀斑期间电离层D区电子密度的观测研究

利用MF雷达观测资料对X级别耀斑爆发期间在66-80km高度之间的电子密度进行了研究，观测到了耀斑爆发期间电子密度的突然增加，在较低高度上的电子密度的时间变化趋势与耀斑的软X射线辐射通量相关．电子密度的变化强度依赖于具体的耀斑参数，有些耀斑引起的电子密度增加高达400cm^-3，有些仅为100cm^-3左右．但耀斑期间在这一高度区间增加的总电子含量增量仅占耀斑辐射引起的整个电离层总电子含量增量的千分之一左右．最后，利用恢复阶段电子密度的时间变化过程估算了1997年11月4日耀斑期间部分高度上的有效复合系数．     

翼身融合布局客机总体参数分析与优化

在翼身融合布局客机总体设计阶段，为评估设计方案的总体性能，建立了翼身融合布局客机总体参数综合分析与优化平台，该平台以翼身融合布局客机的几何参数为输入，完成动力、几何、重量、气动、性能和经济性等模块分析，并以此为基础建立优化设计模型。为快速评估设计方案的性能及优化设计效果，动力分析模块采用了部件级分析模型，重量分析模块采用半经验估算方法，气动分析模块采用面元法结合工程估算方法，性能分析模块采用简化运动学方法，优化模型采用可并行计算的子集模拟优化算法。以某555座级翼身融合布局客机方案为例，应用开发的分析与优化平台，完成了总体参数分析，结果表明分析模型合理。在此方案的基础上，以客机的外形参数和发动机海平面最大推力为设计变量，分别建立了以最大起飞重量最小为目标的单目标优化，以及同时以直接使用成本和进场速度最小为目标的多目标优化，单目标优化结果最大起飞重量降低了约7.17%，多目标优化结果表明直接使用成本降低8.77%的同时进场速度会增加3.32%。     

基于IRI-2012模型广州地区f_0F_2实测与预测的对比分析

利用广州台站(23.2°N,113.3°E)的实测数据和IRI-2012模型提供的预测数据,对比分析了2013年广州地区f_0F2的变化特征.结果表明,IRI-2012模型能够较好预测该地区f_0F_2的变化趋势,并且CCIR参数得到的预测值比URSI参数更接近实测值;预测值与实测值存在系统偏差,在11:00 LT-06:00 LT时段,观测值均比预测值大,其他时段则相反.在日落后至午夜前时段,预测值与实测值有较大差距.绝对偏差的极值点通常出现在20:00 LT左右,最大超过4 MHz.相对偏差变化比较明显的时段是午夜后至凌晨;在02:00 LT或04:00 LT及06:00 LT附近,可能会出现双误差峰值点,最大超过0.4;但在σ变化很大的20:00 LT附近,相对偏差却变化不大.夜间增强现象会使得偏差增大,导致预测值不能很好反映实测f_0F2的变化.     

基于脑电功率谱密度的作业人员脑力负荷评估方法

脑力负荷状态的准确识别对减少因作业人员无效脑力负荷导致的人因事故具有重要意义。针对人-机系统中作业人员脑力负荷客观评估问题开展了基于MATB-Ⅱ平台的3种不同脑力负荷水平下的航空情境实验，记录16名被试的NASA任务负荷指数（NASA-TLX）量表数据和脑电（EEG）信号，提出了一种基于脑电功率谱密度（PSD）和支持向量机（SVM）的个体脑力负荷评估方法。结果表明：随着实验设计脑力负荷水平增加，被试的主观脑力负荷得分显著提高（p<0.001），这表明该实验任务设计较好地诱发了低负荷、中负荷和高负荷情境。在此基础上，通过网格搜索法确定个体脑力负荷评估模型的统一优化参数，惩罚系数取3 000，核函数参数取0.000 1，模型测试正确率达到0.966 5±0.029 8，宏平均的受试者工作特征曲线下的面积（Macro-AUC）达到0.991 0±0.011 4。本文为作业人员脑力负荷状态的客观和准确评估提供了一种新的办法，为后期作业人员脑力负荷状态的实时判别提供模型基础。     

涡桨飞机发展现状及关键气动问题

独特的动力形式赋予了涡桨飞机优越的推进效率和良好的低速机动、起降性能，使得其在军用及民用领域占有重要的地位并得以不断发展，但同时也带来了一系列需要重点关注的设计问题。本文从目前国内外涡桨飞机的发展现状和设计特点出发，提出其面临的主要气动问题。重点针对国内亟待发展的舰载类涡桨飞机起降过程中的失速和操纵问题进行深入研究，剖析了翼面附近流动的分离状态和发展趋势对于失速特性及操纵安全性的影响规律，归纳总结出需要关注的关键约束和设计原则。在此基础上，通过对一组计算实例的分析，给出了机翼空间流场变化特征和宏观气动力之间的内在联系，并深入阐述了三维增升构型与干净构型及其各站位翼剖面的设计关联性。     

旅游者出游激励理论探讨

从期望理论的视角审视旅游者的决策过程,主要借鉴维克托.弗鲁姆(Victor H. Vroom)期望理论的相关原理,初步搭建了旅游者出游激励理论的基本框架,解决了旅游者决策依据问题。通过旅游感知效价、旅游感知成本等全新概念的引入和一系列调查问卷的设计,最终得出了出游激励力的完整表达式并有以下阶段性结论:(1)信息准备是旅游感知效价、旅游期望值2、旅游感知成本的直接来源;(2)旅游感知效价、旅游期望值2、旅游感知成本对旅游者做出决策至关重要;(3)出游激励力是旅游者最终做出决策的惟一依据。     

机器人钻铆系统铆接单元及工艺技术

分析铆接工艺,结合机器人钻铆特点,确定自动铆接单元的工艺方案,突破机器人钻铆系统铆枪匹配、铆枪进给、上钉顶铆等关键技术。机器人自动制孔之后,自动铆接单元可以完成送钉、顶铆、铆接等功能,有效提高钻铆效率。     

某型灯光告警设备实装训练系统的研制

灯光告警是飞机重要的飞行安全监护设备,采集各系统的故障告警信息,经分析处理后,以醒目的灯光及时提示飞机驾驶员进行处置,对确保飞行安全具有关键作用.为提高维护人员对灯光告警设备的维修保障能力,设计了一套灯光告警设备实装训练系统,该系统能够模拟产生飞机各系统的故障告警信息,直观展示故障告警现象和故障处置流程,通过操作训练,使维护人员掌握灯光告警设备的操作使用流程和典型故障排除方法.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.