内孔结构对旋转空化发生器水力特性的影响

空化普遍存在于工业生产、舰船推进、航空航天等领域.使用高速相机对闭式循环试验台的旋转空化发生器内部流动进行试验观测,然后基于RNG k ε湍流模型和Zwart Gerber Belamri空化模型开展了旋转空化发生器流场的数值模拟.结果表明数值模拟结果与试验观测数据吻合较好,验证了本文数值模拟方法的准确性和可靠性.受离心力作用,转子孔内的压力从内径到外径逐渐增大.内孔底部由于轴向旋涡的作用,产生较大旋涡并耗散能量.内孔顶部流体与腔体区主流相互作用,在内孔顶侧产生碰撞并形成较小漩涡.不同内孔结构对旋转空化发生器的空化效果具有重要影响,在相同工况下椭圆形内孔的空化率小于圆锥形和圆柱形,说明型线光滑的内孔结构局部损失小,产生的空化较弱.不同内孔结构下,旋转空化发生器内部压力脉动的主频为转频fi或24fi(对应圆周方向开孔排数),压力脉动最大幅值出现在进口管侧和出口管侧,主要原因是受动静干涉作用影响.     

向心折流式气体中心引躯器

阐述了向心折流式中心引射器的结构方案,分析了其技术效果,归纳出其设计要点。     

无人机在线协同航迹规划时序问题

提出了一种满足时序约束的无人机在线协同航迹规划方法.首先采用按时间推进的协同规划机制解决了 在线协同规划中信息交互存在时间间隔的问题;其次通过设计协同函数,采用自主分布计算协同变量的方法解 决其时序问题,实现了协同无人机按照指定时间间隔先后达到目标区域.仿真选取同时到达和按等时间间隔到 达两类典型时序问题,结果表明该方法可以快速生成符合协同时序要求的协同航迹,且满足实时性要求.     

仿蝗虫跳跃机构设计与分析

以蝗虫跳跃特性为依据,设计出一种仿蝗虫弹跳机构并对其弹跳机理进行研究.首先从生物学和机构运动学相结合的角度,对蝗虫的跳跃过程进行观察和分析,研究蝗虫后腿的跳跃机理,发现跳跃后腿膝关节在起跳过程中的重要作用.利用虚拟样机建立蝗虫模型,对蝗虫的跳跃过程进行仿真.根据蝗虫跳跃机理和后腿结构特点,基于提高能量利用率和弹跳效率原则,设计出一种单自由度的仿蝗虫跳跃机构模型,对该机构在起跳阶段进行运动性能分析,通过与蝗虫跳跃仿真结果进行比较,证明该跳跃机构具有与蝗虫弹跳后腿近似的力学特性.最后通过机构的样机实验验证了分析结果,为进一步研究仿生高效的柔性跳跃机构奠定基础.     

ROPP反演软件算法及其精度分析

介绍了ROPP反演软件中无线电掩星反演的算法与精度分析. 采用COSMIC卫星2008年1 月1日全天的附加相位数据, 反演得到折射率、温度、压强与湿度等参数, 并与CDAAC 相应结果进行对比. 实验结果表明, 在30km高度以下, 折射率、压强和湿度的相对 误差在2%以内, 温度误差不超过2K.      

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

基于过程质量数据的制造系统可靠性建模分析

针对传统制造系统可靠性评价不考虑加工过程产品质量数据,无法对制造系统可靠性进行及时准确的建模分析,提出了基于过程质量数据的制造系统可靠性建模分析方法.首先,在给出了包含制造产品质量的制造系统可靠性新内涵的基础上,分析了制造过程中关键质量特性检验数据和制造系统组件的退化故障数据等过程质量数据对制造系统可靠性建模的影响,从而明确建模需求.然后,首次提出了基于产品合格概率和制造系统组件退化失效率的制造系统可靠性分析模型.最后,通过某盖板的加工系统的可靠性建模分析验证了模型的有效性.结果表明该模型能够方便地利用制造阶段的质量数据更准确地估计出制造系统可靠性.     

双组元统一推进系统优化改进技术进展

不断提高推进剂在轨管理效率,是应用卫星对推进系统的基本要求,也是推进系统的重要发展方向。推进剂剩余量在轨高精度测量和并联贮箱均衡排放主动控制,是提高推进剂在轨管理效率的重要技术手段。针对我国SAST-5000卫星平台双组元统一推进系统,开展了气体注入压力激励方法的关键技术攻关,并取得重要进展。研究结果表明：改良型气体注入压力激励法的推进剂剩余量在轨测量精度达到-0.68%-0.66%,并联贮箱均衡排放控制措施将被动调节的不均衡度控制在优于1.13%,主动纠偏措施还可进一步提高并联贮箱排放推进剂的同步性。     

基于驻留时间比的近地空间碎片环境建模

为分析近地空间碎片的分布规律,提出了一种以碎片在空间网格内驻留时间为基础的碎片环境统计建模方法.该方法利用多项式拟合和求根方法统计碎片在空间网格内的停留时间,获取模型基础数据,并据此采用多项式预测、插值和时间序列分析等技术,综合分析空间碎片的分布与演化规律.给出了一个基于双行根数(TLE,Two Line Elements)数据的建模实例,该实例通过了ORDEM2000模型的对比验证,并获得了一些更精细的近地空间碎片环境特征.所得建模方法和分析结论可为长期运行的近地航天器轨道设计、碰撞风险评估及防护等提供技术支撑.     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.