数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.     

基于偏振约束的立体视频快速运动估计算法

分析了平行双目立体摄像系统的偏振约束特性,提出了一种基于偏振约束的立体视频快速运动估计算法.左通道和右通道分别作为基本层和增强层,对右通道结合视差估计和运动估计得到最优的运动矢量预测值初值,采用不同的运动搜索方法,确定右通道最终运动矢量.若最优的运动矢量预测值是由视差估计得到的左通道运动矢量,则根据偏振约束,左右通道图像对应编码块的运动矢量在垂直方向上的分量相等,因而右通道只在水平方向上进行小范围的运动估计搜索,从而大大降低了右通道运动估计的计算复杂度.实验结果表明,在相同条件下,采用该算法编码一帧图像的运动估计平均时间分别只有采用全搜索块匹配算法、钻石搜索法和三步搜索法的0.27,0.58和0.67倍,编码速度得到显著提高.     

高速铣削系统稳定性动态优化新方法

考虑铣削过程中的自激振动和强迫振动,基于延迟微分方程的稳定性判定准则和强迫振动共振区的半带宽理论,提出一种铣削系统稳定性动态优化新方法.该方法通过选择切削参数和修改系统结构参数,在保证加工表面精度的前提下,获得大的稳定性材料去除率.其目标函数是材料去除率,约束条件是铣削过程稳定且非共振,动态优化变量是铣削系统的切削参数和结构参数.优化程序被阐明,实例分析结果显示,系统在稳定非共振条件下,加工时的材料去除率相比于优化前提高了18.86%.另外,为获得最大的稳定材料去除率和较好的表面精度,在铣削系统优化过程中,应同时考虑颤振稳定性和共振的影响.     

考虑跟踪制导的小天体着陆轨迹闭环优化方法

针对小天体着陆环境存在参数不确定性及初始状态偏差的特点,提出一种小天体着陆闭环优化方法,实现在节省燃料消耗的同时降低对参数的敏感度。首先,建立小天体着陆动力学模型,分析了燃料最优着陆问题;然后,采用线性二次型调节器设计了反馈制导律,推导闭环敏感度矩阵方程,构造燃料消耗和敏感度加权的性能指标,进而能够通过优化降低小天体着陆过程的敏感度。仿真结果表明,该闭环优化方法能有效降低对参数不确定性和初始状态偏差的敏感度,最终达到提高小天体着陆位置和速度精度的目标。     

基于未知地标被动观测的飞航导弹SINS俯仰姿态误差估计方法

针对飞航导弹单独使用时SINS存在姿态估计精度随时间降低的问题,提出了基于未知地标被动观测的SINS俯仰姿态误差估计方法。首先,根据飞航导弹中制导段飞行的特点,把SINS俯仰姿态误差估计问题转化为攻角估计问题。然后,在不改变导弹巡航路径的前提下,利用弹上成像导引头对视场内任意未知地标连续被动观测,分别提出了弹体坐标系和速度坐标系下的攻角估计方法,并分析了观测噪声对量测方程系数的影响。最后,利用平均去噪的思想对估计结果进行处理,提高了SINS俯仰姿态误差的估计精度。仿真结果表明：两种方法都能有效估计出飞航导弹SINS俯仰姿态量测误差。     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

行星着陆探测中的动力学与控制研究进展

着陆探测是获取行星特性和科学数据最直接、最有效的途径,也是目前技术难度最大、最为复杂的探测方式。在行星着陆探测过程中,动力学与控制是影响任务成败的关键因素之一。文章首先分析了行星着陆探测动力学与控制研究所面临的挑战与难题;然后,针对火星和小行星的着陆探测,重点分析了火星着陆进入段和下降段所涉及的动力学与控制,小行星附着探测动力学建模与制导控制的研究现状与关键问题;最后,提出了我国在行星着陆探测动力学与控制领域的未来重点发展方向。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.