航天测控系统自主运行的关键技术

航天事业发展趋势和未来需求指明,航天测控系统应该向以自主运行能力为代表特征的智能化方向发展。基于此,提出了标准化的支持与服务、映射现实的体系架构、实时响应的运行模式、服务化的基础平台等4项关键技术。通过将测控系统和卫星系统之间的接口、测控系统和用户系统之间的接口标准化,从而在此基础上建立最优化的操作逻辑。通过在计算机中映射现实系统的思想方法,从而产生稳定性和灵活性兼备的、支持自主运行的,并具有良好进化性能的系统架构。通过实时响应的运行模式可以很好满足全时段和突发性等具有挑战性的测控服务需求。通过大数据和云计算技术构建基础计算服务平台实现基础层与业务层分离,有利于整个系统的持续改进,提高服务质量改善的速度,建立竞争力优势。由此说明,在当前技术条件下实现自主运行的航天测控系统是可行的。     

民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

民机飞行结冰参数的模拟与校准

结冰问题的研究对于民用飞机设计十分重要,采用结冰风洞试验是主要的方法之一,欧美国家有很多成熟的结冰风洞用于型号研究。结冰风洞中需要对很多参数进行控制,其中水雾参数精确控制的难度很大,而且一般通过间接方法来进行测试校准,往往误差较大,导致不同结冰风洞试验结果往往有所差异。文章介绍了在意大利宇航中心的IWT 结冰风洞完成的冰风洞校准试验,对结冰风洞水雾参数校准方法进行了阐述,为民机结冰风洞研究提供参考。     

多功能实验室环境条件保障装置的设计

介绍了维持计量检定工作环境条件保障装置的设计方法，该装置可实现实验室温，湿度的测量与控制，有方便的通讯接口便于与计算机连接，并附加有多点时间控制电路以实现提前预热仪器设备提高工作效率的功能。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

Measurement of mass diffusion coefficients of O_2 in aviation fuel through digital holographic interferometry

The experimental apparatus to measure the mass diffusion coefficients of O2 in aviation fuel was constructed based on the digital holographic interferometry method. The theory of mass diffusion coefficient and interference image processing were introduced in detail. The accuracy of the experiment was verified by measuring the mass diffusion coefficient of 0.33 mol/L KCl in aqueous solution at 298.15 K. The mass diffusion coefficients of O_2 in RP3 and RP5 aviation fuels were measured at temperature from 278.15 K to 333.15 K, and the Arrhenius equation was employed to fit the experimental data. In terms of the Stokes-Einstein equation, the viscosities of these two aviation fuels were tested to estimate the correlation among mass diffusion coefficient, viscosity and temperature. A uniform polynomial calculation correlation was proposed to predict the mass diffusion coefficients of O_2 in both RP3 and RP5 aviation fuels, and its accuracy is considerably higher than that of the Stokes-Einstein equation.     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

二氧化碳（CO2）气硬树脂砂用促硬剂的研究

本文介绍了一种对碱性甲阶酚醛树脂有促硬作用的盐,在树脂中加入强碱和该促硬剂后,形成了稳定液态粘结剂,吹ＣＯ２气体硬化后可得到较高的即时抗压强度和２４小时抗压终强度。