A NEW EXPRESSION OF FATIGUE SIZE FACTOR

ＡＮＥＷＥＸＰＲＥＳＳＩＯＮＯＦＦＡＴＩＧＵＥＳＩＺＥＦＡＣＴＯＲ￥ＹａｏＷｅｉｘｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｉｒｃｒａｆｔＥｎｇｉｎｅｅｒｉｎｇ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓｔｒａ...     

实用航空发动机LQR权阵选取方法

为了简化航空发动机LQR方法权阵的选取，基于优化理论提出了一种新的目标函数选取方法。该目标函数同时反映控制性能与控制能量的影响，因此，通过优化该目标函数得到的权阵设计出的LQR控制器不仅性能优良，还能保证控制能量在可接受的范围内。此外，该目标函数中包含且只包含了一个可调参数，可简化控制器参数调节过程，使设计者能轻松地在控制性能与控制能量间找到合理的折中。线性仿真、非线性仿真及半物理仿真试验均验证了按此方法设计的控制器的性能。     

B-SURF三维CAD系统及其在无人机研制中的应用

本文所讨论的B-SURF三维CAD系铣包括3-D几何设计与外形数值计算、3-D图形变换及处理、数控绘图与数控加工自动编程等部分,能实现CAD/CAM方面的十个功能。该系统以造型能力较强的重节点非均匀B样条方法为基础,并把重节点的信息应用到后置处理中去,以充分体现出该方法的优越性。系统具有一定的通用性,可用于无人机、轻小型飞机、汽车及其它具有复杂外形产品的几何设计与制造。     

偏最小二乘和ANFIS在飞机燃油油量测量中的应用

分析了飞机燃油箱剩余油量测量系统具有变量多、非线性及变量间存在多重相关性的特点,指出单独采用自适应神经模糊推理系统(Adaptive network-based fuzzy inference system．ANFIS)和偏最小二乘(Partial least- squares,PLS)解决飞机燃油箱剩余油量软测量问题均有各自的局限性。结合上述两种方法的优点,提出了一种基于PLS回归与减法聚类的ANFIS软测量模型。将其应用于预测飞机油箱燃油剩余的建模过程中,得到了比采用PLS回归方法更好的精度,从而证明了该建模方法的有效性。     

喷气公务机总体参数和性能统计分析

按照飞机设计的基本原理，通过对现有喷气公务机总体参数和性能数据的统计分析，寻找它们之间可能存在的内在关系，得到了10个经验公式，包括使用空重与起飞重量、燃油重量与起飞重量、着陆重量与起飞重量、机翼面积与起飞重量、机翼面积与使用空重、机身长度与使用空重、内部容积与人重以及推力、巡航速度、后掠角、展弦比等一些组合参数之间的数学关系。另外还得到了推重比、翼载荷等常用参数的取值范围。这些统计结果为公务机概念设计提供了一些有用的数据。     

面向代理模型的机翼变形计算方法

按照机翼结构设计的原则,对内部结构还未确定的机翼提出了一种通用的变形计算方法。机翼的平面形状可看作由多个梯形组成,机翼弯曲变形为三次函数,扭转变形为一次函数。只要给定翼梢挠度与扭转角,即可计算机翼变形情况下的几何模型,使代理模型能够预测变形后机翼的气动载荷分布。文中给出了两个实际机翼的算例。算例结果表明,本文模型预测的变形与实际结构有限元分析给出的变形吻合较好。     

Hopkinson系统中套筒相对长度对结构件过载值的影响

采用Hopkinson压杆实验装置和Ansys/Ls-Dyna商业计算软件,针对高过载试验中结构件过载值受重力影响的问题进行研究。重力可以使结构件与入射杆之间发生滑移,使得两者不同轴,造成实验结果偏差。分析中不可忽略重力对试验的影响。分析套筒相对长度对试验结果的影响。当相对长度小于0.6时,不能给结构件施加有效的约束;当套筒相对长度大于0.6时,可以认为重力影响基本消失,可以有效地降低重力方向的影响。     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

基于大数据的空管运行安全预警研究

空中交通管制的任务是确保航空器的安全飞行,为了保证飞行安全,需要进行空中交通管制系统运行安全评估及预警的研究.借鉴大数据理论建立空中交通管制大数据概念,从影响空中交通管制系统运行的主要风险因素出发,建立空中交通管制安全运行的状态向量空间,利用主成分分析法去除基础向量线性相关性,再利用聚类分析过程建立空中交通管制运行安全预警知识库,实现空中交通管制运行安全评估和及时预警.结果表明:所用的预警分类分析方法能够很好地实现预警分类和安全评估,为管制部门的相关决策提供理论依据.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.