“天问一号”火星探测器UHF频段中继通信系统设计

“天问一号”火星探测器超高频（Ultra high frequency, UHF）频段中继通信系统作为中国首次火星探测任务实现的重要组成部分,负责为着陆巡视器与环绕器之间在火星进入、下降、着陆阶段（Entry, descent and landing, EDL）与火面巡视阶段提供高效可靠的通信服务。本文对中国火星探测器UHF频段中继通信方案进行了介绍,给出中继通信系统的组成、技术指标及链路设计方法,并对在轨飞行试验数据进行了分析。结果表明,全新研制的“天问一号”探测器UHF频段中继通信系统圆满完成了任务目标,其设计、实现和应用为后续中国深空中继通信系统研制提供了技术参考。     

旋转流场下的振荡动导数试验技术研究

为研究飞机在旋转流场下的非定常气动特性,中国空气动力研究与发展中心低速所在Φ5m 立式风洞开展了旋转流场下的振荡动导数试验技术研究。本文推导了在旋转流场下识别组合动导数的方法,介绍了试验设备,获得了在旋转的同时,由振荡产生的3个组合动导数,并对试验结果进行了分析与讨论。将单自由度动导数结果与Φ3．2m 风洞试验结果进行了对比,旋转/振荡耦合试验结果表明：旋转运动使得俯仰组合动导数变得不稳定,而对于横向组合动导数,大转速则会显著增大非线性。该试验技术能够为研究旋转流场下的非定常气动特性提供一个有效的试验平台。     

反射激波作用下重气柱界面演化的PIV研究

在水平激波管中采用PIV方法研究了反射激波作用下SF6重气柱界面的发展演化。采用射流方法形成SF6无膜气柱界面,并以乙二醇作为示踪粒子。利用连续激光片光源结合高速摄影相机对流场进行显示,得到了反射激波作用下SF6气柱界面的发展过程。结果表明,入射激波的冲击会在界面上产生反向旋转的涡环结构,而反射激波的作用会在界面上产生与初始涡环旋转方向相反的次级涡环结构。此外,对反射激波作用后的流场图像进行PIV后处理,获得了流场连续的速度场和涡量场。获得的环量与已有的理论模型进行比较,取得了较好的一致性,也验证了本文实验方法的可行性。     

Topology optimization of compliant adaptive wing leading edge with composite materials

An approach for designing the compliant adaptive wing leading edge with composite material is proposed based on the topology optimization. Firstly, an equivalent constitutive relationship of laminated glass fiber reinforced epoxy composite plates has been built based on the symmetric laminated plate theory. Then, an optimization objective function of compliant adaptive wing leading edge was used to minimize the least square error（LSE） between deformed curve and desired aerodynamics shape. After that, the topology structures of wing leading edge of different glass fiber ply-orientations were obtained by using the solid isotropic material with penalization（SIMP） model and sensitivity filtering technique. The desired aerodynamics shape of compliant adaptive wing leading edge was obtained based on the proposed approach. The topology structures of wing leading edge depend on the glass fiber ply-orientation. Finally, the corresponding morphing experiment of compliant wing leading edge with composite materials was implemented, which verified the morphing capability of topology structure and illustrated the feasibility for designing compliant wing leading edge. The present paper lays the basis of ply-orientation optimization for compliant adaptive wing leading edge in unmanned aerial vehicle（UAV） field.     

地效翼风洞试验支架干扰数值分析

对地效翼移动地面风洞试验研究中的支架干扰进行了数值模拟和分析。分别对独立地效翼,带支架的地效翼及独立支架进行了数值模拟,计算采用可实现的κ-ε模型,通过求解定常不可压N-S方程,得出地效翼及支架周围流场分布情况。对几组计算结果比较分析了支架和地效翼的空气动力及由于干扰引起的空气动力,发现支架与地效翼之间的相互干扰随着地效翼迎角的增大而增强,如果忽略流动干扰造成的空气动力变化,地效翼升力误差很小,但阻力误差相对较大。同时对有干扰下和没有干扰下的流场进行了对比,分析了支架对翼尖涡流动及绕机翼流动的干扰。翼尖涡在地效翼翼尖附近的发展在0．5犮范围内基本不受支架的干扰;除支架对流场产生干扰外,移动带区域以外的固定地面附近粘性流动也对绕地效翼流动有一定的影响。本研究分析了风洞试验结果的可靠性,为地效翼风洞试验优化设计和地面效应风洞试验研究提供了参考。     

Experimental investigation on SPS casing treatment with bias flow

Generally, casing treatment（CT） is a passivity method to enhance the stall margin of fan/compressor. A novel casing treatment based on the small disturbance theory and vortex and wave interaction suggestion is a method combining passive control and active control, which has been proved effective at enhancing the stall margin of fan/compressor in experiment. In order to investigate the mechanism of this kind of casing treatment, an experimental investigation of a stall precursor-suppressed（SPS） casing treatment with air suction or blowing air is conducted in the present paper. The SPS casing treatment is designed to suppressing stall precursors to realize stall margin enhancement in turbomachinery. The experimental results show that the casing treatment with blowing air of small quantity can improve the stall margin by about 8% with about 1% efficiency loss. By contrast, the SPS casing treatment with micro-bias flow does not improve the stall margin much more than that without bias flow, even worse. Meanwhile, the present investigation has also attempted to reveal the mechanism of stall margin improvement with the casing treatment.It is found that the stall margin improvements vary with the modification of the unsteady shedding flow and the unsteady wall boundary impedance. The experimental results agree fairly well with the theoretical prediction using a flow stability model of rotating stall.     

Multi-sensor control for precise assembly of optical components

In order to perform an optical assembly accurately, a multi-sensor control strategy is developed which includes an attitude measurement system, a vision system, a loss measurement system and a force sensor. A 3-DOF attitude measuring method using linear variable differential transformers （LVDT） is designed to adjust the relation of position and attitude between the spher- ical mirror and the resonator. A micro vision feedback system is set up to extract the light beam and the diaphragm, which can achieve the coarse positioning of the spherical mirror in the optical assembly process. A rapid self-correlation method is presented to analyze the spectrum signal for the fine positioning. In order to prevent the damage of the optical components and realize sealing of the resonator, a hybrid force-position control is constructed to control the contact force of the optical components. The experimental results show that the proposed multi-sensor control strategy succeeds in accomplishing the precise assembly of the optical components, which consists of parallel adjustment, macro coarse adjustment, macro approach, micro fine adjustment, micro approach and optical contact. Therefore, the results validate the multi-sensor control strategy.     

A multi-agent based intelligent configuration method for aircraft fleet maintenance personnel

A multi-agent based fleet maintenance personnel configuration method is proposed to solve the mission oriented aircraft fleet maintenance personnel configuration problem. The mainte- nance process of an aircraft fleet is analyzed first. In the process each aircraft contains multiple parts, and different parts are repaired by personnel with different majors and levels. The factors and their relationship involved in the process of maintenance are analyzed and discussed. Then the whole maintenance process is described as a 3-layer multi-agent system （MAS） model. A com- munication and reasoning strategy among the agents is put forward. A fleet maintenance personnel configuration algorithm is proposed based on contract net protocol （CNP）. Finally, a fleet of 10 aircraft is studied for verification purposes. A mission type with 3 waves of continuous dispatch is imaged. Compared with the traditional methods that can just provide configuration results, the proposed method can provide optimal maintenance strategies as well.     

基于环境独立机制的静态离散贝叶斯网络参数简化方法

在大型工程系统的应用中,贝叶斯网络节点参数存储量随系统复杂度呈指数增长。针对该问题,综合飞行器故障模式通常采用多输入单输出逻辑门表达,以及故障树具有特殊静态离散贝叶斯网络的特点,提出将环境独立简化方法应用于常用典型逻辑门的贝叶斯网络。通过基本定理证明利用基于环境独立机制的概率树代替传统的条件概率表,可将呈指数增长的条件概率表减少为线性变化,并定量给出简化后节点参数个数的计算表达式。最后,将该方法用于某飞机前轮转弯系统故障诊断模型,通过与节点原条件概率表的比较,表明概率树方法可有效减少计算机内存需要。     

航空发动机主动稳定控制方法分析

主动稳定控制能够抑制压气机旋转失速、避免喘振,从而减小稳定裕度,扩大工作范围,使压气机性能得到最大发挥。针对航空发动机主动稳定控制关键技术,分析了以Moore-Greitzer模型为基础的压气机模型、模态控制与非线性控制两种主动控制方法,在此基础上讨论了主动稳定控制方法存在的不足,并指出了压气机模型与主动稳定控制方法的未来发展方向,可为航空发动机主动稳定控制理论研究与工程应用提供有益的参考。