干涉配合构件的应力腐蚀开裂特性

采用恒载荷拉伸实验技术，研究了镀锌３０ＧｒＭｎＳｉＡ锡螺栓干涉配合连接ＬＹ１２－ＣＺ铝合金构件在３．５％ＮａＣａｌ＋０．５％Ｈ２Ｏ２溶液中的应力腐蚀开裂特性。结果表明，随干涉量的增加，应力腐蚀敏感性有所下降，基材与紧固件的电偶效应对应力腐蚀繁感性有重大影响。     

分布式航天器相对位置测量平台设计

分布式航天器间相对位置的实时高精度测量是分布式航天器实现空间队形保持的关键技术之一。为了对相对位置测量方法进行研究、分析和论证，建立了分布式航天器相对位置测量地面实验平台。介绍了分布式航天器相对位置测量和解算的基本原理；论述了仿真平台的组成和功能；基于仿真平台对相对位置测量精度进行了仿真试验，试验结果显示该平台具有良好的性能指标；最后介绍了相对位置解算仿真评估软件的设计方法。     

Responses of ionospheric foF2 to geomagnetic activities in Hainan

Responses of low-latitude ionospheric critical frequency of F2 layer to geomagnetic activities in different seasons and under different levels of solar activity are investigated by analyzing the ionospheric foF2 data from DPS-4 Digisonde in Hainan Observatory during 2002–2005. The results are as follows: (1) the response of foF2 to geomagnetic activity in Hainan shows obvious diurnal variation except for the summer in low solar activity period. Generally, geomagnetic activity will cause foF2 to increase at daytime and decrease at nighttime. The intensity of response of foF2 is stronger at nighttime than that at daytime; (2) seasonal dependence of the response of foF2 to geomagnetic activity is very obvious. The negative ionospheric storm effect is the strongest in summer and the positive ionospheric storm effect is the strongest in winter; (3) the solar cycle has important effect on the response of foF2 to geomagnetic activity in Hainan. In high solar activity period, the diurnal variation of the response of foF2 is very pronounced in each season, and the strong ionospheric response can last several days. In low solar activity period, ionospheric response has very pronounced diurnal variation in winter only; (4) the local time of geomagnetic activities occurring also has important effect on the responses of foF2 in Hainan. Generally, geomagnetic activities occurred at nighttime can cause stronger and longer responses of foF2 in Hainan.     

铝锂合金热处理及其组织性能

本文研究国产８０９０铝锂合金热处理工艺及其组织性能。研究表明：８０９０铝锂合金在５７２±３℃固溶加热、保温３０￣６０分钟，水冷，自然时效时间长达３５天以上，机械性能差；在１９０℃，１９小时人工时效，机械性能σｂ＝５１６￣５７６ＭＮｍ＾－２，δ＝６．２￣６．３％，金相组织均匀。适当延长固溶处理加热保温时间，对铝锂合金强度有益。用扫描电镜对固溶短时保温水冷的人工时效与自然时效Ａｌ－Ｌｉ合金试样进行了继     

某型机外形数模修形设计

在某型机外形数模修形设计过程中,探讨如何确定修形原则,即针对存在各种问题的曲面形态,如何确定不同的修形方法,使整个飞机外型数模达到光顺性、结构可实施性、曲面连续性要求。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

可压缩粘性流动笛卡尔网格虚拟单元方法研究

以二维高雷诺数可压缩粘性流动问题为背景,提出了一种全新的笛卡尔网格虚拟单元方法。基于壁面函数基本假设,构造了壁面函数-虚拟单元方法(WF-GCM),用于定义湍流壁面边界条件。引入参考点的概念计算虚拟单元上的基本变量与湍流变量值,定义了"非贴体"笛卡尔网格下的湍流壁面边界条件,并通过壁面函数模型修正近壁面单元与界面单元。基于自适应笛卡尔网格体系,采用发展的具有二阶精度的格心格式有限体积求解器,数值模拟了跨音速RAE2822翼型绕流问题与超音速圆柱绕流问题,计算结果与实验值吻合良好,显示了WF-GCM对高雷诺数可压缩粘性问题是有效的。     

多尾鳍仿生航行器推进性能的三维数值研究

采用格子波尔兹曼方法及浸没边界法,发展了一套适用于自由游动的三维数值研究程序。进而以多尾鳍推进仿生航行器为原型,讨论了尾鳍数目、形状、材料刚度等构型参数及振幅、频率等尾鳍摆动参数对推进性能的影响。结果表明对称布置、反对称摆动的双尾鳍能够明显消除侧向力而避免航行器主体的横向晃动,且推力大于两个单独尾鳍的简单加和;在中等Reynolds数下,具有波动性质的柔性尾鳍不论是推进速度还是推进效率均优于刚性尾鳍;当尾鳍单纯摆动推进时,具有完整鳍面的半椭圆形尾鳍的推进性能优于后部有缺口的深叉形尾鳍。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.