VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

运用爆破震动来识别地下裂隙和软弱夹层

从爆破震动信号主要来源于爆破区邻近范围内地质结构的自振的观点出发,提出了一种探测地下裂隙和软弱夹层的新技术:把震源布置在裂隙和软弱夹层附近进行爆破,由于介质中裂隙和软弱夹层的存在使得局部结构的刚度减小,直接影响到爆破介质振动的速度幅值和频率,因此可以通过地表接收器接收的振动信号(包括振动速度的幅值和频率)识别出裂隙和软弱夹层的大小和形状等特征.通过无网格的数值算例分别从水平裂隙和斜裂隙的情况下总结规律说明了这种方法的可行性.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

武汉上空Na层季节和夜间变化的观测研究

根据武汉大学激光雷达2001年3月到2002年10月的观测数据,对武汉上空(30.5°N,114.4°E)的背景Na层结构进行了研究,并与其他观测站尤其是Urbana(40°N,88°W)的观测结果进行了比较。发现武汉上空11月的Na层柱密度最大,是4月的2.5倍,质心高度的极小值出现在5月和11月,极大值在4月、9月和12月;全年平均Na层均方根宽度为4.47km.Na层各参数呈现出周期性变化规律,其中Na层均方很宽度呈现出明显的半年周期性变化规律。夜间Na层柱密度呈现总体增加的趋势,质心高度在入夜后立即迅速上升,在2000LT以后上升速度趋缓,凌晨0500LT以后出现下降;Na层均方根宽度在夜间约有1.3km的起伏变化,它入夜后迅速减小,在午夜0035LT时出现一低谷,然后随时间逐渐变宽。     

刚性太阳电池阵基板的研究

文章简要地叙述碳纤维复合材料刚性太阳电池阵基板的结构设计,理论分析,模态试验和振动试验。理论分析和试验结果比较一致。通过试验还解决了基板各种复合材料的力学性能测试问题,取得了必要的数据。     

多元线性回归在坐标测量中的应用

简要介绍了多元线性回归的数学原理,重点分析了坐标测量中利用回归分析进行基本几何要素处理计算的原理、方法和预处理技巧,在此基础上介绍和讨论了形位误差的处理计算方法。     

广州地磁Z分量日变幅的谱特征

利用1972—1993年广州地磁资料，分析了Z分量日变幅的年平均、年变化和半年变化等低频成分的逐年变化，以及小于60天的短周期变化特征．同时对1972—1993年的F10.7日均值进行了谱分析．结果指出，广州地磁Z分量日变幅的年平均与太阳活动指数F10．7的年平均存在良好的线性相关；具有幅度大约5nT夏季极大的年变化，与太阳活动没有明显相关，是一种季节效应；存在春秋分极大的半年变化，幅度与太阳活动有关，高年的幅度明显大于低年；具有明显的与太阳自转相关的27天左右的变化和明显的与行星波有关的接近16日、10日、5日、2日等短周期变化．广州地磁Z分量日变幅的这些谱特征，有助于更深入地了解中低层大气对电离层影响的物理机制．     

光学测径方法综述

概述了近年来国内外出现的各种光学测径方法,并分析了各自的优缺点。