一种基于氧化锆陶瓷的宽带圆极化双环天线

随着射频系统工作频率的不断提高,介质天线因不受导体损耗影响而备受关注。基于高介电常数介质波导在其高次模截止区的漏波辐射以及陶瓷三维打印技术,提出了一种宽带圆极化双环介质天线。相比于同样是工作于行波模式的金属宽带圆极化环天线,该介质天线的漏波辐射更易产生。探究了介质波导的辐射机理,并详细展示了该介质天线的设计过程：先将漏波辐射的直介质波导弯曲成单环以实现圆极化,再把单环结构拓展为双环,从而展宽天线的工作带宽。通过对比单环与双环介质天线可以发现,双环结构的轴比带宽大约是单环的3倍,且两天线在工作频段内均具有良好的右旋圆极化特性。为了验证该天线设计的有效性,利用陶瓷光固化工艺（一种三维打印技术）制作了天线实物,其实测轴比带宽为3.94~5.1GHz,最大增益为8.6dBic。     

Remaining useful life prediction based on variation coefficient consistency test of a Wiener process

High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life (RUL) prediction after the maintenance is directly determined by the consistency of the degradation pattern before and after the maintenance. Aiming at this problem, an RUL prediction method based on the consistency test of a Wiener process is proposed. Firstly, the parameters of the Wiener process estimated by Maximum Likelihood Estimation (MLE) are proved to be biased, and a modified unbiased estimation method is proposed and verified by derivation and simulations. Then, the h statistic is constructed according to the reciprocal of the variation coefficient of the Wiener process, and the sampling distribution is derived. Meanwhile, a universal method for the consistency test is proposed based on the sampling distribution theorem, which is verified by simulation data and classical crack degradation data. Finally, based on the consistency test of the degradation model, a weighted fusion RUL prediction method is presented for the fuel pump of an airplane, and the validity of the presented method is verified by accurate computation results of real data, which provides a theoretical and practical guidance for engineers to predict the RUL of equipment after maintenance.     

Investigation of straightforward impedance eduction method on single-degree-of-freedom acoustic liners

In order to address the current aircraft noise problem, the knowledge of impedance of acoustic liners subjected to high-intensity sound and grazing flow is of crucial importance to the design of high-efficiency acoustic nacelles. To this end, the present study is twofold. Firstly, the StraightForward impedance eduction Method (SFM) is evaluated by the strategy that the impedance of a liner specimen is firstly experimentally educed on a flow duct using the SFM, and then its accuracy is checked by comparing the numerical prediction with the measured wall sound pressure of the flow duct. Secondly, the effects of grazing flow and high-intensity sound on the impedance behavior of two single-layer liners are investigated based on comparisons between educed impedance and predictions by three impedance models. The performance of the SFM is validated by showing that the educed impedance leads to excellent agreement between the simulation and the measured wall sound pressure for different grazing flow Mach numbers and Sound Pressure Levels (SPLs) and over a frequency range from 3000?Hz down to 500?Hz. The grazing flow effect generally has the tendency that the acoustic resistance exhibits a slight decrease before it increases linearly with an increase in Mach, predicted successfully by the sound-vortex interaction theoretical model and the Kooi semi-empirical impedance model. However, the Goodrich semi-empirical impedance model gives only a simple linear relation of acoustic resistance starting from Mach zero. Additionally, when the SPL increases from 110 to 140?dB in the present investigation, the acoustic resistance exhibits a significant increase at all frequencies in the absence of flow; however, the resistance decreases slightly under a grazing flow of Mach 0.117. It indicates that the SPL effect can be greatly inhibited when flow is present, and the grazing flow effect can be reduced partly as well at a relatively high SPL.     

多机布阵航路规划问题研究

针对多机布阵航路规划问题,提出了一种新的策略。首先,建立了多机航路规划模型;然后,采用聚类分析的方法将浮标点分类,并给出了任务分配的原则,从而将多机航路规划问题转化为单机航路规划问题;最后,利用模拟退火算法分别求解,并在此基础之上采用平均路径长度的方法给出了优化算法。     

基于PSD的并联微定位平台位姿检测方法

位置姿态（以下简称位姿）检测是研究六自由度定位平台的技术难点之一,为了快速准确测量六自由度并联微定位平台的位姿,验证平台的定位精度,基于多片二维PSD光电位置传感器设计了六自由度光学位姿检测系统。依据几何光学理论,建立了六自由度位姿解算的数学模型。通过仿真计算,该算法可以快速准确解算六自由度定位平台位姿。进一步分析了该模型在考虑存在测量误差时的理论计算误差,结果表明,基于二维PSD位置传感器的六自由度光学位姿检测系统在解算六自由度定位平台位姿的同时,具备较高的测量精度。     

基于LSTAR的机载燃油泵多阶段退化建模

机载燃油泵的性能退化呈现出平稳—加速—平稳的非线性、多阶段模式,针对现有退化模型难以准确描述其全寿命周期性能退化的问题,以逻辑平滑转换自回归(LSTAR)模型为工具,对机载燃油泵出口压力传感器信号进行建模。首先,对转换后的压力传感器信号建立自回归(AR)模型,通过非线性检验说明建立LSTAR模型的必要性;然后,应用非线性最小二乘法完成参数估计;最后,在AIC准则最小及拟合优度最大的原则下,选择转换变量,通过残差进行模型的适应性检验与正态性检验。结果表明:基于LSTAR模型的拟合精度明显优于线性自回归模型。本文提出的方法成功解决了机载燃油泵性能退化的多阶段准确建模问题,为机载燃油泵的预测与健康管理(PHM)奠定了坚实的基础。     

并行多种群自适应遗传算法在COW集群上的实现

为改善标准遗传算法的求解效率,提出一种基于6模糊控制器的并行多种群自适应遗传算法。利用MPI(Messagepassinginterface)技术建立了一个COW(Clusterofworkstation)集群,将算法在该硬件平台上进行了实现。3机COW集群的仿真实验结果在演示算法设计可行性的同时,表明该算法的求解效率明显优于用于对照的单种群算法,具有在解决组合优化问题上广泛应用的可能。本文还对影响并行算法的参数进行了探讨。     

基于空间分层组合设计的火箭落点实时计算模型

为保证航天发射任务航区安全,实现火箭落点的高精度实时快速计算,提出一种基于空间分层的数学模型,对落点计算几何模型与动力学模型进行组合设计.该模型将弹道空间分层为自由段和再入段,自由段采用地球扁率修正的落点计算几何椭圆模型,而再入段采用考虑了空气阻力的动力学模型,并加入地球摄动及旋转等因素的修正.经与实际落点数据对比验证,该模型实现了精度和效率的最佳融合,能够满足航天发射任务火箭落点高精度、快实时的计算要求.      

压气机内部噪声特征与转子叶片声固耦合机理分析

航空发动机压气机转子叶片故障多由机械激励和气动激励造成,而高强声波对转子叶片的激振因素不容忽视。通过开展某型涡扇发动机压气机内部噪声测试试验,研究压气机转子叶片振动机理及其与噪声信号的对应关系。阐述了压气机内部旋转不稳定性非定常压力波作用机制,提出了基于刚性壁声波导管技术的导出式噪声测量方法,完成了某型涡扇发动机压气机内部噪声信号测试,对噪声信号进行了频谱分析和声传播特性分析。研究结果表明,某型涡扇发动机压气机内部噪声信号频谱呈现高峰值纯音分量1 402 Hz,并且该纯音分量与转子叶片通过频率呈现特定的频率组合关系。该纯音分量的噪声源在压气机内部沿发动机顺航向方向从后向前传播。利用旋转不稳定性理论,将声源频率在不同坐标系下进行转换,当噪声源周向模态数为13时,该纯音分量可调制出与高压一级转子叶片一阶振动频率相对应的激振频率。     

基于打靶试验的风扇机匣包容能力评估方法

为保障飞行安全,航空发动机机匣需具有足够的抗冲击能力以包容高速旋转状态下丢失的叶片。针对某型涡扇发动机对开式风扇机匣包容性评估需求,提出了1种结合真实机匣打靶试验和有限元分析评估机匣包容能力的方法。通过使用真实机匣和真实叶片进行打靶试验获得风扇机匣的冲击损伤情况,并基于ANSYS/LS-DYNA进行了瞬态动力学有限元分析。结果表明:采用Johnson-Cook模型预测的机匣伤形状、尺寸以及叶片残余速度均与试验结果接近,验证了数值分析方法的准确性。采用验证过的数值分析方法开展旋转状态下机匣的包容性评估,发现由于撞击姿态差异和失效模式转变,风扇机匣可以包容以100%工作转速飞出的叶片,但机匣出现长裂纹,接近临界包容状态。所提出的方法可以在不具备部件包容试验条件的情况下,以较方便的形式对机匣包容能力可靠评估。