Countermeasure Against Regenerative and Forced Chatter of Flexible Workpieces in Milling Processs Using Bi-directional Excitation

A novel extended methodology for chatter suppression in milling process by applying external forced vibrations to the workpiece in two orthogonal directions which are the feed and cross-feed directions.Both the regenerative and forced chatter suppression during the milling process of flexible workpieces are investigated.Here,the workpiece is subject to a sinusoidal periodic force in the feed direction to disrupt the regenerative effect.Additionally,to minimize the forced chatter,the workpiece is subject to the periodic excitation force in cross-feed direction.This force is proportional to the magnitude of the estimated cutting force in cross-feed direction and has a phase opposite to the cutting force to minimize the vibration amplitudes.The effectiveness of the proposed method is evaluated numerically and experimentally,for the spindle speed located in both the local minima and local maxima of the stability lobe diagram.The numerical simulations indicate significant suppression effect in terms of vibration amplitudes,resulting in suppression of both the regenerative chatter and the forced chatter.Experiments were conducted by using a workpiece-mounted active stage composed of flexure hinges and driven by piezoelectric actuators.The experimental results agree qualitatively with the numerical simulations.The proposed method indicates a remarkable vibration reduction effect for both regenerative and forced chatters.     

A Three-Dimensional Simulation of Collisional-Interchange-Instability in the Equatorial-Low-Latitude Ionosphere

We present a three-dimensional simulation of collisional-interchange-instability in the equatorial-low-latitude F region of ionosphere. The instability is responsible for the generation of large plasma density depletion or bubble. General 3D potential and continuity equations are derived to simulate the phenomena. To understand the linear aspect of the instability, the general 3D linear growth rate is derived using 3D potential equation. The linear growth characteristics are compared with earlier field-aligned-integrated growth analyses. The numerical simulation of bubble in the 3D spherical polar geometry is finally presented. Distinct evolution characteristics of bubble in 3D and 2D simulation are further discussed.     

BCu93P丝状钎料的断裂分析

针对BCu39P钎料丝材在热挤压过程中易产生断裂，质量不稳定等缺陷，用金相法和扫描电镜（SEM），分析和研究了该钎料丝材的内部组织分布和断口形貌，找出了引起钎料断裂的原因，并提出了解决措施和钎料内部组织分布的理想模型。     

从自由试验提取边界具有弹性支承的约束结构模态

作者曾对“从自由试验提取约束结构模态”所提出的动柔度法，仅适用于刚性支承情况。在工程中，弹性支承状态是常见的，为此，本文重新建立了这一情况下，约束结构试验模态的提取方法。该方法具有普遍性，因为当支承刚度很大时，由本文方法可得到刚性支承下的结果；当支承刚度很小时，便可获得工程中用橡皮绳悬吊结构后所测得的自由－自由试验模态；当支承刚度为零时，本方法可提取到纯粹的自由－自由模态。总之，当支承刚度为任何值时，本方法都能提取到相应约束结构的满意试验模态参数。这些表明本文算法是非常的稳定，这一点对于工程应用是至关重要的。     

关于切顶线三角形有向面积的定值定理及其应用

本文给出切顶线三角形（有向）面积的一些定值定理，并据此推出切顶线共点（其中包括射影几何中著名的Brianchon定理在圆外切三角形中的情形）的结论。     

疲劳破坏寿命的概率统计方法研究综述

概述了结构疲劳破坏寿命特性概率统计方法研究的发展及理论基础，从常规疲劳特性P－S－N曲线的研究应用、疲劳裂纹扩展率统计模型研究现状以及损伤力学理论在疲劳强度中的研究展望来综述现有随机疲劳破坏寿命分布统计特性曲线的研究方法和工程应用，同时介绍该领域研究的新成果新方法，对疲劳破坏随机性研究的未来发展的关键及趋势提出看法。     

惯性/图像组合导航中的双模态双滤波器研究

在简要介绍了飞行器视觉图像定位导航原理及模型的基础上，针对其非线性模型的推广Kalman滤波的收敛与初始条件有关的问题，将其定位导航的两种模型（线性与非线性模型）组合，提出了双模态双滤波器滤波方法。这种滤波能很好地解决非线性推广Kalman滤波的收敛问题。通过第一个线性滤波器的滤波估计给第二个非线性滤波器提供滤波初值，使这一非线性滤波收敛，并能取得较高的滤波精度。