Countermeasure Against Regenerative and Forced Chatter of Flexible Workpieces in Milling Processs Using Bi-directional Excitation

A novel extended methodology for chatter suppression in milling process by applying external forced vibrations to the workpiece in two orthogonal directions which are the feed and cross-feed directions.Both the regenerative and forced chatter suppression during the milling process of flexible workpieces are investigated.Here,the workpiece is subject to a sinusoidal periodic force in the feed direction to disrupt the regenerative effect.Additionally,to minimize the forced chatter,the workpiece is subject to the periodic excitation force in cross-feed direction.This force is proportional to the magnitude of the estimated cutting force in cross-feed direction and has a phase opposite to the cutting force to minimize the vibration amplitudes.The effectiveness of the proposed method is evaluated numerically and experimentally,for the spindle speed located in both the local minima and local maxima of the stability lobe diagram.The numerical simulations indicate significant suppression effect in terms of vibration amplitudes,resulting in suppression of both the regenerative chatter and the forced chatter.Experiments were conducted by using a workpiece-mounted active stage composed of flexure hinges and driven by piezoelectric actuators.The experimental results agree qualitatively with the numerical simulations.The proposed method indicates a remarkable vibration reduction effect for both regenerative and forced chatters.     

High-resolution observations of Hα flare regions

This paper gives a review of the recent high-resolution H observations of solar flares and flare-productive active regions. From studies of the morphological and evolutional features of H flare emitting regions, two types of two-ribbon flares, which are termed separating two-ribbon flare and confined two-ribbon flare, are discussed. The former is characterized by conspicuous separating motions or expanding motions of the H two ribbons, whereas the latter shows only a short range of or no separating motions of the two ribbons. The explosive compact flares, which occur in some compact newly-emerging flux regions, are also discussed.Attention is paid to the successive and impulsive brightenings of H flare points which form the H flare kernels and the front lines of H two ribbons at the impulsive phases of flares. Temporal relationships between H line intensities or profiles and hard X-ray or microwave emissions are discussed to discriminate the energy transport mechanisms in the flare loops.H monochromatic image of high spatial resolution, at the present time, is the most sensitive detector for finding the first appearance of newly-emerging magnetic flux region and the developing features of sheared configuration of magnetic field, both of which are the key factors in flare energy build-up processes. It is suggested that the successive emergence of a twisted magnetic flux rope might be essential for the production of a major flare.Contributions from the Kwasan and Hida Observatories, Kyoto University, No. 292.     

Rotational Motions Excited by Vertical Harmonic Motions

Rotation of a pair of wings was driven by the vertical harmonic motion of a pin inserted into the center hole of the wings.To elucidate the mechanism by which the rotational motion of the wings was excited,the relationship between the wings and the pin was examined by tracking their motions using both displacement measurements and high-speed photography.The motion modes occurred in this study were categorized into five types:slipping,rolling,jumping(without eccentricity),jumping(with eccentricity),and non-rotation.In the case that the hole of the wings was located at a distance from the center of the wings,referred to as″with eccentricity,″the slipping,jumping(with eccentricity),and non-rotation modes resulted.The experimental results showed that the mechanism of the jumping(with eccentricity)was different from that of the other modes(slipping,rolling,jumping(without eccentricity)),which are well known to be driven by the periodical reaction of the wings against the vertical vibration of the pin.It was found that the jumping(with eccentricity)was driven by the non-periodical force with the collision between the wing hole and the pin.     

Studying the Lunar Ionosphere with SELENE Radio Science Experiment

Radio occultation observations of the electron density near the lunar surface were conducted during the SELENE (Kaguya) mission using the Vstar and Rstar sub-satellites. Previous radio occultation measurements conducted in the Soviet lunar missions have indicated the existence of an ionosphere with peak densities of several hundreds of electrons per cubic centimeters above the dayside lunar surface. These densities are difficult to explain theoretically when the removal of plasma by the solar wind is considered, and thus the generation mechanism of the lunar ionosphere is a major issue, with even the validity of previous observations still under debate. The most serious error source in the measurement is the fluctuation of the terrestrial ionosphere which also exists along the ray path. To cope with this difficulty, about 400 observations were conducted using Vstar to enable statistical analysis of the weak signal of the lunar ionosphere. Another method is to utilize Vstar and Rstar with the second one being used to measure the terrestrial ionosphere contribution. The observations will establish the morphology of the lunar ionosphere and will reveal its relationship with various conditions to provide possible clues to the mechanism.     

Orbital design and technological feasibility of Halley mission

Missions to Halley's comet in 1985–1986 are discussed. They include pre-perihelion encounter, post-perihelion encounter, the utilization of Venus swing-by, one round mission in which the spacecraft goes the round of the Sun before the encounter and missions to the point beneath the perihelion of Halley's orbit. Technological feasibility of the small spacecraft is also discussed on the basis of the use of the improved version of M-3S launch vehicle.     

A Reverse Monte Carlo Study of H+D Lyman Alpha Absorption from QSO Spectra

A new method based on a Reverse Monte Carlo [RMC] technique and aimed at the inverse problem in the analysis of interstellar (intergalactic) absorption lines is presented. The line formation process in chaotic media with a finite correlation length (l > 0) of the stochastic velocity field (mesoturbulence) is considered. This generalizes the standard assumption of completely uncorrelated bulk motions (l 0) in the microturbulent approximation which is used for the data analysis up-to-now. It is shown that the RMC method allows to estimate from an observed spectrum the proper physical parameters of the absorbing gas and simultaneously an appropriate structure of the velocity field parallel to the line-of-sight.The application to the analysis of the H+D Ly profile is demonstrated using Burles and Tytler [B&T] data for QSO 1009+2956 where the DI Ly line is seen at za = 2.504.The results obtained favor a low D/H ratio in this absorption system, although our upper limit for the hydrogen isotopic ratio of about 4.5 × 10-5 is slightly higher than that of B&T (D/H = 30 _-0.5 ^+0.6 × 10^-5). We also show that the D/H and N(HI) values are, in general, correlated, i.e. the derived D-abundance may be badly dependent on the assumed hydrogen column density. The corresponding confidence regions for an arbitrary and a fixed stochastic velocity field distribution are calculated.