垃圾焚烧灰渣用于二灰碎石路面基层的试验研究

用城市生活垃圾焚烧灰渣替代部分集料,按照9种不同的配比制备二灰灰渣碎石路面基层材料,进行路用性能试验。结果表明:与普通二灰碎石对比,在相同的二灰含量下,灰渣碎石的最大干密度降低8.8%,而最佳含水量增大38.4%;无侧限抗压强度最高可达1.03 M Pa;粉煤灰含量对材料强度影响较为显著,其中粉煤灰含量减少1%,无侧限抗压强度值降低21%;材料的干缩系数最大为67.2μ/%;石灰与粉煤灰含量越低,材料的干缩应变越小,平均干缩系数也越小,当二灰含量减少2.5%,平均干缩系数降低3.1%。二灰灰渣碎石材料满足基层的相关要求,灰渣可以为公路建设提供可持续的集料来源。     

直连式喷气发动机试车台试验件进气的联接方式及有关问题

针对直连式喷气发动机试车台稳定段同试验件的联接问题，根据空气流量测量、补氧及推力测量等不同试验目的与要求，讨论了选择联接方案对试验结果的影响。结果认为，模拟总温较高时，音速喷嘴流量测量联接方式应慎重选用；采用能够测量进、出口压力的迷宫密封方式，可以根据喷嘴及回绕式阻隔件流动理论计算出空气泄漏量并可测出压力损失值，从而对试验所要求的补氧量及推力测量提供较准确的修正。     

冗余度机器人动力学优化控制研究

稳定性和终态自运动是动力学优化中的难点.为了解决冗余度机器人动力学优化中的这些困难,深入研究了动力学优化和关节速度间的内在联系和矛盾,提出通过优化关节速度提高动力学优化的综合品质的思想,阐述了在线调节关节速度齐次项,同时改善稳定性和终态自运动的方案.仿真证实所提方案的实用性和有效性.     

基于激光扫描的火箭对接装配测量及调整技术

针对某型运载火箭水平和垂直对接高精度、高效率的装配需求，提出采用大尺寸非合作目标三维形貌测量仪辅助对接的方法。通过激光扫描测量运载火箭部段点云数据，拟合火箭对接面的形貌，反馈给对接执行机构调整位姿参数。理论分析和试验验证表明，该方法可有效提高对接装配精度和效率。     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

基于NSGA II算法分布度改进的ATREX发动机性能优化方法研究

为使飞行轨迹上膨胀式空气涡轮冲压发动机(Air Turbo Ramjet Expander, ATREX)推力满足飞行器要求，同时比冲为对应推力下的最优值，基于改进分布度的NSGA II算法建立了以推力、比冲为优化目标的ATREX多目标优化模型。本文首先提出了基于个体优化目标间直线距离的筛选函数，改善了NSGA II算法优化结果的分布度；然后基于改进的NSGA II算法建立了ATREX性能多目标优化模型，获得了地面状态发动机推力、比冲最优解。在优化结果分布度接近前提下，与基于原NSGA II算法建立的ATREX性能多目标优化模型对比，基于改进NSGA II算法建立的优化模型所需初始种群个数及迭代时间均下降30%左右。     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

导航卫星有效载荷新型扩频码研究及实现*

针对导航卫星中Gold扩频码存在的不足,卫星导航系统的多个频点在下一代系统建设中选用Weil码作为扩频码。首先对Gold码和Weil码的特性进行仿真分析,仿真结果表明,Weil码的自相关特性和互相关特性有明显的优势。针对导航卫星有效载荷需要提供长期稳定可靠的导航服务且资源有限,对Weil码的实现方式也有很高的要求,设计一种基于FPGA平台的Weil码实现方案,解决了导航卫星有效载荷中Weil扩频码生成的资源和可靠性问题,已实际在轨连续运行超过一年没有出现故障。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.