空间相机低频隔振系统及试验验证

随着遥感卫星分辨率的提高。星上微振动对空间相机的影响越来越显著。在相机与卫星平台之间安装隔振装置,将飞轮、扫描机构等扰振源产生的振动与相机隔离开来是一种改善其工作环境的有效方法。文章介绍了针对中巴地球资源卫星研制的相机被动隔振系统,以及在地面结构星上进行的联合隔振性能测试。测试结果表明。传递至相机的两个主要扰振频率分量...     

电磁铆接技术在大飞机制造中的应用初探

 电磁铆接是一种新型连接工艺,本文介绍了电磁铆接技术的特点及其发展。针对大飞机制造的技术需求,分析了电磁铆接技术在大飞机研制中的作用,重点介绍了电磁铆接技术在干涉配合铆接、复合材料结构铆接、干涉配合紧固件安装等方面的应用。实验研究表明电磁铆接形成的干涉量均匀,能够提高结构疲劳寿命,可以安装大干涉量干涉配合紧固件,对复合材料结构铆接可以减少安装损伤。分析了为满足大飞机研制的需要,中国下一阶段在电磁铆接技术方面要进行的工作。     

环境严酷性指数腐蚀当量方法及其应用研究

 建立统一的腐蚀损伤环境变量——环境严酷性指数（ESI）,并研究其在飞机结构耐久性设计中的应用。在材料/结构腐蚀与单一环境类型/要素/强度关系基础上,按照《由电化学测量值计算腐蚀率和相关量的标准方法》(ASTM G102 89),引入并给出相应的ESI,并在一定工程假设下,给出在综合环境(由不同环境类型/要素/强度组成)作用下的ESI。同时,在腐蚀损伤等效原则下,用标准的环境类型/要素/强度及其作用时间当量化地表征综合环境及相应的作用时间(即环境谱),为环境加速试验环境当量提供依据并形成环境当量谱以应用于飞机结构耐久性设计中的腐蚀防护与控制(EEF),评估结构的检查周期/日历寿命。根据相关试验结果计算了典型金属材料在不同环境中的环境严酷性指数及环境当量化系数(EEF), 给出了环境简化或折算的算例。     

适用于无轴承开关磁阻电机的功率变换器设计

 无轴承开关磁阻电机不仅具有开关磁阻电机的优点,而且拓宽了无轴承技术的应用范围。而功率变换器是无轴承开关磁阻电机的重要组成部分,其向电机绕组提供电流,以产生所需转矩和悬浮力,对电机旋转和悬浮性能有重要影响。根据无轴承开关磁阻电机电磁转矩和悬浮力控制原理,详细分析了其对功率变换器的要求,提出了主绕组功率变换器和悬浮绕组功率变换器的设计原则,并分析了其各种工作模式和数学模型。最后通过对实验样机的调试,给出了实验结果,实现了无轴承开关磁阻电机的稳定悬浮。     

基于传动误差和齿面印痕控制的弧齿锥齿轮小轮加工参数的设计(英文)

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.     

复合材料自动铺放技术的发展及应用

介绍了自动铺带技术和纤维丝束铺放技术的工作原理、特点、国外发展趋势及应用情况,并探讨了国内的发展现状与需求.     

Magnetosphere response to the 2005 and 2006 extreme solar events as observed by the Cluster and Double Star spacecraft

The four identical Cluster spacecraft, launched in 2000, orbit the Earth in a tetrahedral configuration and on a highly eccentric polar orbit (4–19.6 R_E). This allows the crossing of critical layers that develop as a result of the interaction between the solar wind and the Earth’s magnetosphere. Since 2004 the Chinese Double Star TC-1 and TC-2 spacecraft, whose payload comprise also backup models of instruments developed by European scientists for Cluster, provided two additional points of measurement, on a larger scale: the Cluster and Double Star orbits are such that the spacecraft are almost in the same meridian, allowing conjugate studies. The Cluster and Double Star observations during the 2005 and 2006 extreme solar events are presented, showing uncommon plasma parameters values in the near-Earth solar wind and in the magnetosheath. These include solar wind velocities up to ∼900 km s⁻¹ during an ICME shock arrival, accompanied by a sudden increase in the density by a factor of ∼5 and followed by an enrichment in He⁺⁺ in the secondary front of the ICME. In the magnetosheath ion density values as high as 130 cm⁻³ were observed, and the plasma flow velocity there reached values even higher than the typical solar wind velocity. These resulted in unusual dayside magnetosphere compression, detection of penetrating high-energy particles in the magnetotail, and ring current development following several successive injections of energetic particles in the inner magnetosphere, which “washed out” the previously formed nose-like ion structures.     

模态综合的直接变换法

基于固定界面模态综合的Craig-Bampton方法,提出了模态综合的直接变换方法,该法在形式上更简洁,适用于大规模动力学系统的模态分析和动力学模型减缩。对采用直接变换法模态综合过程的计算误差做了分析,给出了计算误差界,阐明了模态综合后总体结构的固有频率与子结构保留主模态个数之间的关系。针对子结构界面自由度太大的情况,提出了直接变换法的分部算法,不需组集系统总刚度、总质量矩阵,仅在子结构的基础上完成系统的减缩。计算实例表明该算法的有效性及计算的稳定性。     

RBCC推进系统主火箭发动机气氧／煤油推力室研究

为满足RBCC推进系统主火箭发动机对气氧／煤油推力室的要求,对其进行了高燃烧室压力和温度、大范围变工况工作研究。气氧／煤油推力室喷注器采用中心区气液双组元内混式喷嘴和边区直流喷嘴结合结构,身部采用夹层冷却结构。通过对推力室气氧／煤油推进剂的点火及雾化混合技术、推力室喷注器及身部冷却设计技术、推力室的点火启动、稳态工作等关键技术的研究表明,推力室在室压3MPa、5MPa工况下可稳定燃烧。额定推力650N的气氧／煤油推力室方案可靠、点火工作正常,可以满足大范围变工况稳定工作要求。     

小型试验固体火箭发动机研究

从理论上分析了影响固体火箭发动机性能散布的主要因素,设计了相应配套的小型试验固体火箭发动机,用于提高燃速测试精度,并应用于大型发动机的研制和批产。理论分析和测试结果表明,燃速的测试精度以及复合固体推进剂自身的燃速散布是影响固体火箭发动机性能的最主要因素,把握了复合固体推进剂燃速,可减小性能散布,确保大型固体火箭发动机批次研制和生产性能的稳定性和准确性。