圆柱齿轮齿廓偏差及螺旋线偏差精度控制研究

在齿轮加工过程中,热处理变形是影响齿轮精度的主要原因之一.通过分析CA457桥从动圆柱齿轮在渗碳淬火热处理中齿廓偏差、螺旋线偏差的变化数据,得出齿廓偏差、螺旋线偏差的变形规律.根据渗碳淬火后基圆半径和螺旋角的变形均呈增大趋势,修改加工刀具的设计齿廓和齿轮的设计螺旋线,降低热处理前产品的工艺精度,保证了热处理后产品的合格率.在创造良好经济效益的同时也为同类产品提供了设计依据.     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

高校后勤社会化改革中有关财务管理问题的研究

运用现代财务管理知识结合我国高校后勤的特点，就高校后勤社会化改革中涉及到的有关配套政策措施和财务管理问题进行了深入分析研究。     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

养老金替代率的灵敏性分析

文章推导出了企业职工养老金替代率的计算公式,对影响替代率的五个因素分别进行了灵敏性分析,给出了替代率的最佳可行区域.     

毕棚沟 一路走过

梦是对无限、永远的可能的相信，而现实并不……黑、白棋总是在棋盘上腾转挪移，而黑、白并不……[编者按]     

扩频码协议在集中式扩频无线分组网中的应用

从集中式扩频无线分组网的角度出发，着重讨论了正向链路和反向链路上的扩频码协议的选择问题，并且提出了一种扩频码协议的具体实现方案。     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。     

模拟磁带重放信号数字化过程中的频偏校正技术及应用

模拟磁带重放信号中存在的频率偏移会对信号的处理分析产生不利影响。利用模拟磁记录器的多个磁道同时记录的能力,将实际信号和特定的参考信号同时进行记录,磁带信号重放和数字化过程中,利用这个参考信号来控制A/D采集时钟的速度,从而可在很大程度上减少磁带重放系统带来的频率偏移。实验结果表明,该技术方法能有效地解决模拟磁带重放信号中存在的频偏问题。     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。