一种基于实体模型的三轴数控加工刀轨生成算法

实体模型是几何造型的高级模型，它具有完整的曲面拓扑关系，国内基本实体模型的数摈加工算法的需求日渐迫切，本文提出了一种适合实体模型的三轴数控加工刀位轨迹生成算法；首先根据加工行距作一组平行于刀轴的平面，与模型的待加工表面求交，得到一系列交线，再根据加工步长规划另一组与上述平面垂直且平行于刀轴的平面，与上述交线求交，得到一交点网格，判断刀具与数据点的位置关系从而得到刀位轨迹。     

一种新的射频仿真目标位置控制方法与软件研究

针对射频目标仿真系统中目标位置的控制，本文通过对国内外目标位置控制的常用方法进行研究，提出一种新的通用目标位置控制方法，该方法适用于任何天线分布的面阵。利用这种新的方法编写了基于三元阵天线阵面的射频仿真目标位置控制软件，实现对多目标在天线阵面上多种轨迹运动下的高速准确的定位，并能实时监视目标的运动状态和运动轨迹。     

惩罚函数法在发动机性能计算中的应用

按照涡喷发动机工作时遵守的气动热力学定律，建立了发动机的稳定数学模型，并针对双轴涡轮发动机性能计算的非线性数学模型，利用优化和最优控制理论中的惩罚函数法，对发动机性能进行了基于约束的最优求解程序设计，利用程序对某型发动机的稳定飞行特性进行了计算，计算结果表明，使用惩罚函数法求出的特性曲线变化规律正确，发动机平衡方程的解的精度更高，在此基础上得出的发动机飞行特性也更准确。另外惩罚函数法对初值的要求很低，迭代运算不易发散。     

基于LabVIEW平台的数字抽取滤波器的设计与应用

介绍了基于LabVIEW平台的数字抽取滤波器的设计。该方法是对高采样率的数据进行低通数字滤波，然后对结果用1／K倍重新采样，将数字信号频带压缩K倍，从而实现动态测试较大的动态范围要求和划分频带要求，数字抽取滤波器的设计包含调制，数字滤波和抽取三方面，LabVIEW是一种基于图形编程语言（G语言）的开发环境，采用交互界面设计，模块化编程，该滤波器也是作者正在研制的动态测试分析虚拟仪器的一个重要组成部分。本文给出了在LabVIEW平台上所进行数字抽取滤波器的设计原理，仿真结果和在动态数字信号分析中的应用。     

An Experimental Radar Facility

A coherent CW superheterodyne radar system operating at frequencies of 9, 17, 35, and 70 GHz is described. The radars are installed on a free-flight range to study backscattering from wakes of hypersonic-velocity projectiles. Each radar is equipped with a focused-lens antenna oriented at an angle of approximately 45° to the flight axis. Amplitude and phase of the received signal are recorded separately. Some typical results are given to demonstrate the capabilities of the equipment.     

Comments on the Communication and Data Problems Associated with a Mars Trip During a Conjunction Phase

The analysis and comments presented in this paper are meant to establish the general communication parameters associated with Martian flyby probes and with lander and manned vehicles. Fundamental data transfer problems are reviewed to define comparisons and trends of tradeoffs for future studies. Selected focal points are based upon the long propagation path length, with inherent time delays, and the high noise produced by the sun. These problems are magnified because large quantities of data must be obtained to satisfy the needs of the scientific community and the curiosity of an interested public. A comparison of two communication systems is provided: the microwave spectrum and the optical spectrum, as represented by the microwaves at 2.3 GHz and the laser at 6328 ?. A method of cost effectiveness or value received from space missions (a criterion of power input for data quantity received) is also presented.     

Checkout: A Changing Technology

On-board/in-flight checkout of future aerospace systems will necessitate a fundamental departure from today's design and checkout activities. The interrelationship of checkout, incorporated into prime vehicular functions, man as a subsystem, and standardization Of hardware/software must be considered as a functional and integral entity if the efforts of today's long-range planning are to become tomorrow's reality. This paper will describe future systems checkout, maintenance and support considerations, and actions and tentative measures necessary for implementation. The realization of the implementation of these concepts into functional elements will depend, accurately and economically, upon the degree of government perceptiveness and the extent of industrial support.     

Advanced Development of ESG Strapdown Navigation Systems

The fundamental problem of inertial navigation, double integration of acceleration to obtain position, is defined and discussed. Mechanizations of both space-stable and local-vertical platform systems are exhibited. The synthesis problem for an electrically suspended gyro (ESG) strapdown system is defined and discussed: readout, readout errors due to vehicle motion, synchronization of readout with system computer, alignment, correction and calibration for mass unbalance drift, and digital mechanization. Alignment, calibration, and acceleration measurement are also discussed. Sources of error involved in the electronic gimbaling including those peculiar to strapdown configuration are discussed and compared to mechanically gimbaled systems. Advanced developments required in the component and systems areas are listed, and it is shown that such development will lead to reduced complexity, higher accuracy, and increased reliability and utility for inertial systems.     

Recent developments in micrometeoroid simulation

In the first part the state of the art of the most advanced micrometeoroid simulation techniques is reviewed. Then a new accelerator is described, which was developed jointly by the Technische Universität München and the N.A.S.A. George C. Marshall Space Flight Center. Finally the use of this new technique is indicated for basic research in fields other than astronautics.     

High-Sensitivity Quartz Accelerometer for Measurements of Small Accelerations of Spacecraft

A quartz sensor of small accelerations with a capacitive transducer is designed and produced, allowing one to measure spacecraft accelerations with a resolution of 10^–7 m/s² in the range ±10^–1 m/s². The results of calibration of the sensor by the method of inclinations are presented.