Metrology on-board PROBA-3: The shadow position sensors subsystem

PROBA-3 is an ESA mission aimed at the demonstration of formation flying performance of two satellites that will form a giant coronagraph in space. The first spacecraft will host a telescope imaging the solar corona in visible light, while the second, the external occulter, will produce an artificial eclipse. This instrument is named ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun). To accomplish the payload's scientific tasks, PROBA-3 will ensure sub-millimeter reciprocal positioning of its two satellites using closed-loop on-board metrology. Several metrology systems will be used and the Shadow Position Sensor (SPS) subsystem senses the penumbra around the instrument aperture and returns the 3-D displacement of the coronagraph satellite, with respect to its nominal position, by running a dedicated algorithm. In this paper, we describe how the SPS works and the choices made to accomplish the mission objectives.     

Hardware-In-the-Loop Simulations of spacecraft attitude synchronization using the State-Dependent Riccati Equation technique

A nonlinear control technique pertaining to attitude synchronization problems is presented for formation flying spacecraft by utilizing the State-Dependent Riccati Equation (SDRE) technique. An attitude controller consisting of relative control and absolute control is designed using a reaction wheel assembly for regulator and tracking problems. To achieve effective relative control, the selective state-dependent connectivity is also adopted. The global asymptotic stability of the controller is confirmed using the Lyapunov theorem and is verified by Monte-Carlo simulations. An air-bearing-based Hardware-In-the-Loop Simulator (HILS) is also developed to validate the proposed control laws in real-time environments. The SDRE controller is discretized for implementation of a real-time processor in the HILS. The pointing errors are about 0.2° in the numerical simulations and about 1° in the HILS simulations, and experimental simulations confirm the effectiveness of the control algorithm for attitude synchronization in a spacecraft formation flying mission. Consequently, experiments using the HILS in a real-time environment can appropriately perform spacecraft attitude synchronization algorithms for formation flying spacecraft.     

A mission concept for the low-cost large-scale exploration and characterisation of near earth objects

This paper presents the preliminary mission and science analysis of a new mission concept for the large scale, low-cost exploration of Near Earth Objects (NEOs). The concept is to enable close range observations of NEOs by performing close flybys of a series of NEOs at one of their nodal points, with pairs of small spacecraft flying in formation. The paper presents a preliminary assessment of accessible asteroids and multi-target tour trajectories from data available in the JPL small-body database.The main instruments on board each spacecraft are a camera and a LIDAR which together can be used for orbit determination, surface imaging, direct asteroid ranging and asteroid mass estimation via intersatellite ranging. The paper provides a qualitative and quantitative assessment of the measurable quantities during each flyby. In particular, the feasibility of a novel method of NEO mass estimation is assessed.     

航天器稀疏编队飞行的概念及其设计方法

提出了航天器稀疏编队飞行的概念及其设计方法，阐明了它与通常的紧密编队飞行的区别及其在应用上的前景。采用了一个比Hill解更为广泛的新公式来设计稀疏编队，并列举了若干稀疏编队的阵形。当各航天器距离很近时，该公式自然退化为与Hill解相同的形式。通过与Hill解的设计相比较，表明了新公式用于稀疏编队设计的优越性。     

基于网络同步的航天器编队飞行姿态控制方法

航天器编队飞行需要协同控制系统进行统一的协调管理,以实现协同工作。文章将网络同步控制理论应用于航天器编队飞行姿态控制,以提高航天器编队飞行姿态控制的协同性。首先,采用修正的罗德里格斯参数描述航天器姿态动力学;然后,基于网络同步控制算法,设计航天器编队飞行的非线性姿态协同控制律;考虑成员航天器间姿态变化的差异,采用混合控制技术,设计航天器编队飞行混合控制策略。仿真结果验证了控制方法和控制律的有效性,并且相比单一反馈机制,混合控制具有更好的控制品质。     

航天器相对导航与控制技术的典型任务

在空间交会对接、在轨服务、近距离目标监视以及航天器编队飞行任务中,通常需要通过相对导航与控制技术对相互邻近的航天器进行控制.回顾了该领域典型的空间任务,特别关注任务、相对导航与控制方法、相对测量设备、推进系统等主要特征,并总结了该项技术的发展趋势.     

卫星运动对星间双向法时间同步的影响分析与校正

编队飞行卫星间的距离和时间差测量是实现分布式航天器完成特定任务的重要基础。文章分析了采用双向法实现星间距离和时间差测量处理时,卫星运动对星间双向比对测量的影响,推导出在考虑卫星运动情况下,星间双向比对测量数据的处理算法,给出了忽略卫星运行参数情况下,对距离和时间差计算结果的影响情况对比。     

Proposal of application of same beam VLBI measurements in precision orbit determination of lunar orbiter and return capsule and lunar gravity field simulation in Chang’E-3 mission

High accuracy differenced phase delay can be obtained by observing multiple point frequencies of two spacecraft using the same beam Very Long Baseline Interferometry (VLBI) technology. Its contribution in lunar spacecraft precision orbit determination has been performed during the Japanese lunar exploration mission SELENE. In consideration that there will be an orbiter and a return capsule flying around the moon during the Chinese lunar exploration future mission Chang’E-3, the contributions of the same beam VLBI in spacecraft precision orbit determination and lunar gravity field solution have been investigated. Our results show that the accuracy of precision orbit determination can be improved more than one order of magnitude after including the same beam VLBI measurements. There are significant improvements in accuracy of low and medium degree coefficients of lunar gravity field model obtained from combination of two way range and Doppler and the same beam VLBI measurements than the one that only uses two way range and Doppler data, and the accuracy of precision orbit determination can reach meter level.     

Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

Testing Modified Newtonian Dynamics with LISA Pathfinder

We suggest that LISA Pathfinder, a technology demonstrator for the future gravitational wave observatory LISA, could be used to carry out a direct experimental test of Modified Newtonian Dynamics (MOND). The LISA Pathfinder spacecraft is currently being built and the launch date is just a few years away. No modifications of the spacecraft are required, nor any interference with its nominal mission. The basic concept is to fly LISA Pathfinder through the region around the Sun-Earth saddle point, in an extended mission phase, once the original mission goals are achieved. We examine various strategies to reach the saddle point, and find that the preferred strategy, yielding relatively short transfer times of just over 1 year, probably involves a lunar fly-by. LISA Pathfinder will be able to probe the intermediate MOND regime, i.e. the transition between deep MOND and Newtonian gravity. We present robust estimates of the anomalous gravity gradients that LISA Pathfinder should be exposed to, based on MONDian effects as derived from the Tensor-Vector-Scalar (TeVeS) theory. The spacecraft speed and spatial scale of the MOND signal combine in a way that the spectral signature of the signal falls precisely into LISA Pathfinder’s measurement bandwidth. We find that if the gravity gradiometer on-board the spacecraft achieves its currently predicted sensitivity, these anomalous gradients could not just be detected, but measured in some detail.     

InfraRed Astronomy Satellite Swarm Interferometry (IRASSI): Overview and study results

The far-infrared (FIR) regime is one of the few wavelength ranges where no astronomical data with sub-arcsecond spatial resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. For many research areas, however, information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, from highly excited carbon monoxide (CO) and especially from water lines would open the door for transformative science. These demands call for interferometric concepts. We present here first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for an FIR space interferometer. Extending on the principal concept of the previous study ESPRIT, it features heterodyne interferometry within a swarm of five satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1 arcsec over the whole wavelength range of 1–6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by members of our study team. We first give a motivation on how the science requirements translate into operational and design parameters for IRASSI. Our consortium has put much emphasis on the navigational aspects of such a free-flying swarm of satellites operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard, in quasi-real-time. We also address questions regarding the spacecraft architecture and how a first thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. This will have implications for the necessary internal calibration of the local tie between the laser metrology and the phase centres of the science signals and will ultimately affect the accuracy of the baseline estimations.     

采用无线电单独测量的编队卫星相对轨道自主确定

在实际工程应用中,编队卫星由于任务的要求使得部分测量设备(例如,激光设备)不可用,这就造成系统的观测性下降。文章将条件数应用于编队卫星系统的可观测度的定量计算;并针对编队卫星进行轨道机动时仅采用无线电进行测量的工况,采用强跟踪离散卡尔曼滤波(UKF)算法进行仿真计算。仿真结果表明该方法具有很强的跟踪能力,并且鲁棒性、稳定性和精度与常规UKF算法相当。     

Spacecraft formation flying for Earth-crossing object deflections using a power limited laser ablating

A formation flying strategy with an Earth-crossing object (ECO) is proposed to avoid the Earth collision. Assuming that a future conceptual spacecraft equipped with a powerful laser ablation tool already rendezvoused with a fictitious Earth collision object, the optimal required laser operating duration and direction histories are accurately derived to miss the Earth. Based on these results, the concept of formation flying between the object and the spacecraft is applied and analyzed as to establish the spacecraft’s orbital motion design strategy. A fictitious “Apophis”-like object is established to impact with the Earth and two major deflection scenarios are designed and analyzed. These scenarios include the cases for the both short and long laser operating duration to avoid the Earth impact. Also, requirement of onboard laser tool’s for both cases are discussed. As a result, the optimal initial conditions for the spacecraft to maintain its relative trajectory to the object are discovered. Additionally, the discovered optimal initial conditions also satisfied the optimal required laser operating conditions with no additional spacecraft’s own fuel expenditure to achieve the spacecraft formation flying with the ECO. The initial conditions founded in the current research can be used as a spacecraft’s initial rendezvous points with the ECO when designing the future deflection missions with laser ablation tools. The results with proposed strategy are expected to make more advances in the fields of the conceptual studies, especially for the future deflection missions using powerful laser ablation tools.     

The dynamics and control of the CubeSail mission: A solar sailing demonstration

The CubeSail mission is a low-cost demonstration of the UltraSail solar sailing concept (, ,  and ), using two near-identical CubeSat satellites to deploy a 260 m-long, 20 m² reflecting film. The two satellites are launched as a unit, detumbled, and separated, with the film unwinding symmetrically from motorized reels. The conformity to the CubeSat specification allows for reduction in launch costs as a secondary payload and utilization of the University of Illinois-developed spacecraft bus. The CubeSail demonstration is the first in a series of increasingly-complex missions aimed at validating several spacecraft subsystems, including attitude determination and control, the separation release unit, reel-based film deployment, as well as the dynamical behavior of the sail and on-orbit solar propulsion. The presented work describes dynamical behavior and control methods used during three main phases of the mission. The three phases include initial detumbling and stabilization using magnetic torque actuators, gravity-gradient-based deployment of the film, and steady-state film deformations in low Earth orbit in the presence of external forces of solar radiation pressure, aerodynamic drag, and gravity-gradient.     

深空测控网干涉测量系统在“鹊桥”任务中的应用分析

在"嫦娥4号"任务的第一阶段—"鹊桥"阶段,北京航天飞行控制中心利用佳木斯及喀什深空站对"鹊桥"进行了干涉测量观测,获取了实时与事后的高精度测角观测量,有效支持了任务的实施。两深空站需同时完成测控任务,无法交替射电源观测来进行系统差标校,基于此系统采用了长时间隔、在航天器观测前及双站结束后观测射电源的标校方法,在地月转移段、月球至L2转移段、Halo轨道形成段开展了多次干涉测量观测,所获得的时延、时延率结果直接应用于事后联合轨道确定,结果表明:深空网的时延观测精度约为3 ns。     

Accurate determination of the successive moments of the sun: a new window open on the sun''s interior

Despite its great importance for solar physics, mainly in the fields of solar fundamental astrometry, helioseismology, planetary motions and relativistic effects, the successive zonal harmonics of the Sun still remain elusive and subject to some controversy. Direct observations from the ground suffer from atmospheric effects and are not of enough accuracy. Up to now, space flights (SOHO) or balloon missions give consistent data but lead to spurious results due to the noise. As far as indirect observations are concerned, the more precise determination of the successive moments (mainly J₂, J₄ and even J₆), will be provided unambiguously by the study of the orbit of a spacecraft flying close to the Sun or around Mercury. This has been scheduled, but not yet achieved. In this paper we will first emphasize why it is important to know the successive zonal harmonics of the Sun with a high accuracy. We will show how their precise knowledge permits to obtain informations on the Sun's interior, mainly the shear's regions (tacholine or leptocline). Then we will give an up-to-date review of both theories (including the heliosismology approach) and data. We will explain some of the difficulties, mainly due to the differential rotation and we will give an insight of what the PICARD's mission will bring in that field. Then we will propose a novel concept for a Sun's mission, which would lead to the most accurate determination of the successive solar moments (that could be part of another project), and thus opening a new window on the Sun's interior.     

椭圆轨道卫星空间任意位置悬停的方法

对任务星施加持续的控制加速度,使其在飞行过程中相对于目标卫星的空间位置保持不变,即实现任意位置悬停飞行。通过对任务星与目标星的相对运行分析和重力差异补偿分析,给出了在飞行过程中任务星相对于运行在椭圆轨道上的目标星实现任意位置悬停所需的径向、切向和法向控制加速度公式。最后对典型悬停飞行过程进行了动力学仿真,并对不同悬停飞行任务的能量消耗进行了对比分析,表明在一段时间内对任务星进行轨道悬停是可行的。