小行星附近制导与控制研究综述

由于小行星具有引力场不规则、物理参数不确定性大、表面逃逸速度小等因素,使得小行星附近制导和控制极具挑战性。回顾了小行星探测任务的历史、现状和意义;针对小行星附近制导与控制研究的基础即小行星附近动力学,分析了研究现状;针对悬停、绕飞、转移、着陆等任务形式,详细介绍了轨道制导和控制方法方面的热点问题和研究现状;基于研究现状,列举了部分未来可进一步研究的方向和问题。     

强不规则天体引力场中的动力学研究进展

小行星探测与彗星探测是深空探测的重要方面。一般来说,小行星和彗星因质量都不足以使得万有引力克服应力达到流体静力学平衡,而具有强不规则的外形。研究强不规则天体引力场中的动力学行为及其内在机制,是探测器被不规则天体捕获并对其形成近距离探测轨道的基础。从引力场模型和动力学行为两个方面综述了强不规则天体引力场中动力学的研究进展,在引力场模型的研究方面介绍了强不规则天体引力场建模的球谐函数摄动展开模型、简单特殊体模型及多面体模型的研究现状,在动力学机制的研究方面介绍了强不规则天体引力场中的周期轨道和拟周期轨道、平衡点、流形、分岔与共振以及混沌运动的研究现状,指出了这些方面研究的重点与难点。分析了强不规则体引力场中动力学的研究趋势。     

双星系统L1点悬停探测控制器设计与仿真

双小行星系统探测具有重要的科学意义,受其复杂动力学环境影响,探测任务极具挑战。利用球谐函数法对双星系统进行引力场建模,求解双星系统平动点,并选取其内部共线平动点L_1点作为双星系统悬停探测目标位置。采用航天探测实际任务中常用的脉冲推力式发动机,设计了一种原理简单、便于工程实现的常值切换bang-bang控制器。以69230Hermes双星系统为例,将Hermes近似为双椭球系统,仿真分析航天器在Hermes双星系统L_1点悬停飞行的控制效果,验证所提控制策略有效性。     

三小行星系统216 Kleopatra引力场中的动力学

主带三小行星系统216 Kleopatra是由主星216 Kleopatra及两个小月亮(moonlet)Alexhelios[S/2008(216)1]和Cleoselene[S/2008(216)2]组成。其中主星216Kleopatra是一个具有强不规则形状如哑铃的连接双星,大小为217km×94km×81km,外小月亮Alexhelios大小约为8.9km,内小月亮大小约为6.9km。其动力学行为具有非常丰富的科学内涵。研究了三小行星系统216Kleopatra自身的动力学机制及其引力场中探测器的运动规律,分析了主星质心固连系中探测器的动力学方程,给出了三小行星引力全多体问题的动力学方程及Jacobi积分,方程考虑了三个小行星的不规则外形、轨道与姿态。发现三小行星系统216Kleopatra主星引力场中一种新的周期轨道族的倍周期分岔。考虑主星的不规则精确外形与引力、两个小月亮的相互作用,研究了该三小行星系统的动力学构形。发现Kleopatra的强不规则几何外形及两个小月亮Alexhelios和Cleoselene的相互作用引起两个小月亮的轨道参数的显著变化。     

利用绳系太阳帆减缓小行星自转的技术研究

提出一种利用太阳帆绳系系统逐渐减小小行星自转速率的方法。在系绳长度不变的情况下,利用太阳帆受到的太阳光压力使其始终保持与小行星同步,避免了由于小行星自转而引起的系绳缠绕问题。通过控制太阳帆使系绳始终拉紧,系绳中的拉力便可以持续提供一个与小行星自转方向相反的力矩,从而减小其自转速率。仿真结果表明,面积10⁶ m²的太阳帆,经过约86天可将小行星的自转消除,验证了该方法的有效性。     

双小行星系统引力场建模方法研究

针对弱引力双小行星系统的引力场建模问题,本文采用复杂度和精度依次递增的球体–球体模型、椭球体–球体模型和改进的限制性椭球体–椭球体模型来进行引力场建模,并分别采用椭圆积分以及无积分环节、计算效率高的二阶二次球谐函数来表征引力势,从而比较精确地刻画双小行星系统和探测器构成的限制性全三体问题的动力学模型;针对双小行星系统1999KW4,对其不同的引力场模型进行了仿真研究,分别给出了不同模型下的等效势能函数曲面及零速度曲线,比较了不同模型下的平动点位置坐标偏差。结果表明,二阶二次球谐函数计算引力势的椭球体-椭球体模型计算精度高,复杂程度低,计算量更少,计算速度更快,能够较精确的对双小行星系统进行引力场建模。     

一种利用非均质多面体模型确定小行星附近引力场的方法

从力学的角度出发,如何准确地建立小行星附近的引力场模型是小行星研究中最为基础、最为关键的部分。提出一种基于多面体模型的模拟小行星附近引力场的方法。该方法的准确性一方面取决于多面体模型的精细程度,即模型分辨率,另一方面取决于勒让德级数的截断误差。选取均质小行星模型,求取其引力场并与使用原有多面体方法求得的引力场进行对比,以此验证本方法的可行性。通过对形状参数相同的均质、非均质多面体模型附近的引力场进行对比来说明非均质小行星引力场建模的重要意义。     

不规则小天体引力场内的广义甩摆轨道

选取具有典型不规则外形的细长形小天体作为研究对象,应用偶极子模型近似其外部引力场分布。针对其引力场内的质点动力学,研究一类特殊的动力学行为--广义甩摆轨道。与传统引力甩摆轨道不同,该类轨道能够在很短的时间内将质点从环绕轨道改变至逃逸轨道,或将逃逸轨道上的质点捕获至小天体引力场内。从轨道能量的变化入手,分析该类轨道的成因并给出仿真算例。     

基于Terminal滑模的小行星探测器着陆连续控制

针对弱引力场不规则小行星探测器安全下降与着陆,提出了一种基于比例微分(PD,Proportional plus Derivative)及非奇异Terminal滑模的连续控制方法.在着陆点坐标系下推导了探测器的动力学方程,设计了开环燃料次最优多项式标称轨迹制导方法.针对下降和着陆两个不同阶段提出了PD和非奇异Terminal滑模变结构连续控制方法.将PD控制的易操作性与非奇异Terminal滑模控制收敛速度快、调整时间短有效结合,保证了探测器安全着陆.仿真结果表明了提出方法的可行性和有效性.     

小行星探测科学目标进展与展望

由于较好地保留了太阳系早期形成和演化历史的遗迹,小行星,尤其是近地小行星,已成为国际深空探测领域的研究热点。介绍了小行星的定义、分类和主要探测方式,指出目前小行星探测已进入空间探测的新时代;总结了国际小行星探测的现状,包括已实施和正在实施的小行星探测任务的科学目标、科学载荷配置,以及获取的主要科学数据等;探讨了未来小行星探测的发展趋势和主要科学问题,并对我国未来自主小行星探测任务科学目标的制定进行了展望。     

Solar-photon sail hovering orbits about single and binary asteroids

Solar-photon sails can be useful for missions towards and about asteroids. Indeed, for the interplanetary transfer phase, missions to asteroids often require a large variation in inclination and solar-photon sails perform very well for such high energy missions. In the same way, solar-photon sails are also expected to perform well in the phase about the asteroid. This paper studies single and binary asteroids’ hovering regions by using a sailcraft. In order to consider a sailcraft with its own mass and shape, the mutual polyhedral method (usually used to study asteroid dynamics) is used; therefore, the sailcraft is designed by means of tetrahedra. The procedure to obtain the hovering regions about a single asteroid is presented and an accurate analysis of the control variables is carried out. Moreover, control torques required to maintain hovering orbits are obtained by considering the gravitational torques acting on the sailcraft due to the asteroid. In the end, the theory for hovering orbits is extended to binary-asteroid systems and applied to the binary system 1999 KW4.     

Economic assessment of high-thrust and solar-sail propulsion for near-earth asteroid mining

Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from the Earth’s deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. The paper focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods are compared in terms of maximum economic return and sets of attainable target asteroids. Results for transporting resources to geostationary orbit show that the orbital parameter hyperspace of suitable target asteroids is considerably larger for solar sails, allowing for more flexibility in selecting potential target asteroids. Also, results show that the Net Present Value that can be realized is larger when employing solar sailing instead of chemical propulsion. In addition, it is demonstrated that a higher Net Present Value can be realized when transporting volatiles to the Lunar Gateway instead of geostationary orbit. The paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.     

Paths not taken – The Gossamer roadmap’s other options

Highly efficient low-thrust propulsion is increasingly applied beyond commercial use, also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another recent development is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities.Just over ten years ago, the DLR-ESTEC Gossamer Roadmap to Solar Sailing was set up to guide technology developments towards a propellant-less and highly efficient class of spacecraft for solar system exploration and applications missions: small spacecraft solar sails designed for carefree handling and equipped with carried application modules.Soon, in three dedicated Gossamer Roadmap Science Working Groups it initiated studies of missions uniquely feasible with solar sails such as Displaced L₁ (DL1) space weather advance warning and monitoring, Solar Polar Orbiter (SPO) delivery to very high inclination heliocentric orbit, and multiple Near-Earth Asteroid (NEA) rendezvous (MNR). Together, they demonstrate the capability of near-term solar sails to achieve at least in the inner solar system almost any kind of heliocentric orbit within 10 years, from the Earth-co-orbital to the extremely inclined, eccentric and even retrograde. Noted as part of the MNR study, sail-propelled head-on retrograde kinetic impactors (RKI) go to this extreme to achieve the highest possible specific kinetic energy for the deflection of hazardous asteroids.At DLR, the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)², i.e., 20 m by 20 m square solar sail at DLR Cologne in 1999 was revitalized and directed towards a 3-step small spacecraft development line from as-soon-as-possible sail deployment demonstration (Gossamer-1) via in-flight evaluation of sail attitude control actuators (Gossamer-2) to an envisaged proving-the-principle flight in the Earth-Moon system (Gossamer-3). First, it turned the concept of solar sail deployment on its head by introducing four separable Boom Sail Deployment Units (BSDU) to be discarded after deployment, enabling lightweight 3-axis stabilized sailcraft. By 2015, this effort culminated in the ground-qualified technology of the DLR Gossamer-1 deployment demonstrator Engineering Qualification Model (EQM). For mission types using separable payloads, such as SPO, MNR and RKI, design concepts can be derived from the BSDU characteristic of DLR Gossamer solar sail technology which share elements with the separation systems of asteroid nanolanders like MASCOT. These nano-spacecraft are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.Like any roadmap, this one contained much more than the planned route from departure to destination and the much shorter distance actually travelled. It is full of lanes, narrow and wide, detours and shortcuts, options and decision branches. Some became the path taken on which we previously reported. More were explored along the originally planned path or as new sidings in search of better options when circumstance changed and the project had to take another turn. But none were dead ends, they just faced the inevitable changes when roadmaps face realities and they were no longer part of the road ahead. To us, they were valuable lessons learned or options up our sleeves. But for future sailors they may be on their road ahead.     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

直升机旋翼与机体间气动干扰风洞实验研究

介绍了由风洞实验得到的共轴式直升机在悬停和前飞时旋翼/机体气动干扰结果,并与单旋翼直升机进行了比较.旋翼对机体的干扰主要表现为:悬停时机体上产生垂向阻力和俯仰力矩;前飞时上述干扰减小,但机体的纵向和航向气动特性发生变化;分别增大水平尾翼面积和下旋翼桨距,旋翼对机体的干扰量增大;悬停时,机体对旋翼无明显影响,前飞时产生有利干扰.      

Status of solar sail technology within NASA

In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced. NASA has successfully completed functional vacuum testing in their Glenn Research Center’s Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by Alliant Techsystems Space Systems and L’Garde, respectively. The sail systems consist of a central structure with four deployable booms that support each sail. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and are scalable to much larger solar sails – perhaps as large as 150 m on a side. Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails. Furthermore, life and space environmental effects testing of sail and component materials was also conducted.     

Accurate approximation of in-ecliptic trajectories for E-sail with constant pitch angle

Propellantless continuous-thrust propulsion systems, such as electric solar wind sails, may be successfully used for new space missions, especially those requiring high-energy orbit transfers. When the mass-to-thrust ratio is sufficiently large, the spacecraft trajectory is characterized by long flight times with a number of revolutions around the Sun. The corresponding mission analysis, especially when addressed within an optimal context, requires a significant amount of simulation effort. Analytical trajectories are therefore useful aids in a preliminary phase of mission design, even though exact solution are very difficult to obtain. The aim of this paper is to present an accurate, analytical, approximation of the spacecraft trajectory generated by an electric solar wind sail with a constant pitch angle, using the latest mathematical model of the thrust vector. Assuming a heliocentric circular parking orbit and a two-dimensional scenario, the simulation results show that the proposed equations are able to accurately describe the actual spacecraft trajectory for a long time interval when the propulsive acceleration magnitude is sufficiently small.