一种火星进入段在线脱敏轨迹设计方法

为降低轨迹求解难度,提升脱敏制导的适应性,针对火星进入段提出一种在线脱敏轨迹设计方法.首先,采用预测的末端航程偏差和状态敏感度作为性能指标,利用该指标为倾侧角凸函数的特性将最优求解问题转换为简单的动态寻优过程;其次,结合任务要求和估计的进入点状态,通过迭代得到同时满足航程和横程要求的三自由度脱敏轨迹.仿真表明该方法可达到与现有脱敏设计相近的末端状态精度.     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

基于混合法的月球软着陆轨迹优化

利用混合法思想和人工免疫算法研究了月球软着陆轨迹优化问题.首先建立月球软着陆系统模型并进行归一化处理;然后基于混合法思想利用庞特亚金（Pontryagin）极大值原理推导最优控制律,以伴随变量初值和终端时刻作为优化变量,将终端约束作为罚函数引入评价函数中,将月球软着陆轨迹优化问题转化为非线性规划问题（NLP,Nonlinear Programming）;最后应用引导人工免疫算法（GAIA,Guiding Artificial Immune Algorithm）求解该优化问题.仿真结果表明,GAIA混合算法比直接法的寻优速度快,终端误差小,且可搜索到理论最优轨迹;同时,GAIA混合算法的伴随变量初值收敛范围比间接法大,降低了最优月球软着陆轨迹的搜索难度.     

线性伪谱模型预测能量最优姿态机动控制方法

针对大气层外飞行器大角度姿态机动控制问题,提出了一种能量最优的线性伪谱模型预测大角度姿态机动控制方法。首先,通过离线弹道规划获得满足初始、终端约束且能量最优的姿态机动控制轨迹;然后,以离线弹道为基准对姿态动力学方程进行小扰动线性化处理,获得以状态偏差为自变量的线性误差传播方程;最后,以能量最优作为性能指标,通过高斯伪谱法对原问题进行离散,推导获得满足终端偏差修正的控制解析表达式。数值计算和蒙特卡罗仿真表明,该方法不仅计算精度高、求解速度快,满足实时计算要求,而且具有较强的鲁棒性,能够实时消除各种干扰。此外,在同等控制精度条件下,该方法相对传统线性二次型调节器（LQR）跟踪方法,能量消耗减小10%。      

基于在线轨迹迭代的自适应再入制导

针对传统轨迹跟踪制导方法在再入飞行中无法较好适应导航模式切换等突变状况的问题,提出了一种能够有效应对制导系统输入信息不连续性的自适应在线轨迹生成方法。该方法通过实时的多项式拟合以及迭代过程确定满足终端约束条件的高度-速度剖面,并解算出当前飞行状态下所需的攻角与倾侧角指令,从而平稳、精确地将飞行器引导至末端能量管理段。通过对速度与能量、高度、轨迹倾角以及待飞航程等状态量建立解析关系,该方法拥有迭代速度快以及收敛性强的优势。仿真结果显示,该方法对输入信息的误差及跳变等不确定因素的适应性很强,在各类干扰情况下较传统方法拥有更高的制导精度。相较于传统轨迹跟踪制导方法,该方法在实际应用背景下显著地提升了制导的自主性与适应性。      

Uncertainty propagation for statistical impact prediction of space debris

Predictions of the impact time and location of space debris in a decaying trajectory are highly influenced by uncertainties. The traditional Monte Carlo (MC) method can be used to perform accurate statistical impact predictions, but requires a large computational effort. A method is investigated that directly propagates a Probability Density Function (PDF) in time, which has the potential to obtain more accurate results with less computational effort. The decaying trajectory of Delta-K rocket stages was used to test the methods using a six degrees-of-freedom state model. The PDF of the state of the body was propagated in time to obtain impact-time distributions. This Direct PDF Propagation (DPP) method results in a multi-dimensional scattered dataset of the PDF of the state, which is highly challenging to process. No accurate results could be obtained, because of the structure of the DPP data and the high dimensionality. Therefore, the DPP method is less suitable for practical uncontrolled entry problems and the traditional MC method remains superior. Additionally, the MC method was used with two improved uncertainty models to obtain impact-time distributions, which were validated using observations of true impacts. For one of the two uncertainty models, statistically more valid impact-time distributions were obtained than in previous research.     

CMGs驱动空间机械臂的自适应终端滑模控制

摘要： 针对V构型控制力矩陀螺（CMGs）驱动的空间机械臂的轨迹跟踪控制问题,研究一种自适应非奇异终端滑模（ANTSM）控制方法.利用基于Kane方程的递推组集算法建立了系统的动力学模型.以跟踪误差为变量,构造非奇异滑动面,以保证跟踪误差在滑动面上有限时间收敛.针对系统质量特性参数与关节处干扰力矩的不确定性,设计自适应控制器用以调节控制增益.该控制方法无需不确定性的上界,且闭环系统具有最终一致有界性.仿真结果表明,该控制器可使系统准确跟踪期望轨迹,并对质量特性参数不确定性和关节干扰力矩具有良好的鲁棒性.     

基于高斯伪谱法的空天飞机上升段最优轨迹设计

针对复杂多约束条件下空天飞机上升段燃料最优轨迹优化问题,提出一种基于高斯伪谱法的上升段轨迹优化策略.依据发动机的推力特性将上升轨迹合理分段,使原最优控制问题转化为多段最优控制问题后,采用高斯伪谱法进行并行优化计算.数值仿真结果表明采用这种轨迹优化策略能够满足组合动力系统工作模态转换时对飞行状态的约束条件,可以在较短的时间内完成高精度的上升段轨迹优化任务,从而验证了该方法的有效性.     

基于动态逆的空空导弹奇异摄动中制导律

结合奇异摄动和动态逆方法,以飞行时间和末端能量的线性组合为性能指标,推导了一种近最优中制导律.导弹状态方程根据状态变量时间常数写成三时间尺度系统.降阶系统包括纵程、横程和比能动力学方程.用最优控制理论求解出降阶系统最优解,即原系统的外解.动态逆应用于边界层修正,得到一个闭环控制器,其性能可根据爬升、高空等高飞行和下滑阶段或其他情况的不同要求进行调整.仿真结果表明:该制导律满足了对弹道平滑度、飞行时间和末端能量的要求.中段末端航向误差小,为中、末制导的平稳交接班提供了保障.      

非一致终端约束下火星大气进入段制导律设计

针对小升阻比的火星探测器在火星大气进入过程中所面临的难点问题,对火星大气进入过程制导方法进行了研究。首先在确知探测器弹道系数和升阻比的前提下,考虑过程量及开伞条件约束,优化设计再入飞行的初始再入角。然后考虑非一致终端约束和飞行器的有限机动能力,设计参考轨迹剖面,并确保其能提供足够的裕度来应付各种参数不确定性。最后设计标准轨道法制导律,完成轨迹有效跟踪,并通过六自由度仿真验证了算法的合理性,为火星着陆项目中大气进入段制导方案设计提供参考。     

Mars entry guidance using a semi-analytical method

Future Mars missions may require improved landed accuracy to facilitate the landing site selection and finally access a region of complex terrain with high scientific return. This paper is to develop a novel, robust, and precision entry guidance algorithm for Mars entry vehicles with low lift-to-drag ratios. In the presence of large uncertainties, the entry terminal point controller algorithm can encounter severe performance degradation due to: (1) the small perturbation assumption, and (2) theoretically ignoring deviations in the atmospheric-density model, aerodynamic-force model, etc. Based on numerical technologies and the classical variation method (VM), this work develops a semi-analytical (SA) algorithm, in which combined effects of several dynamic uncertainties now can be addressed. The terminal-downrange error is predicted by a numerical predictor such that the dependence on the reference trajectory can be reduced and then the issue caused by the small perturbation assumption can be addressed. Such a predicted terminal-downrange error is finally corrected by an analytical corrector, which is designed by the VM. It is indicative that there can be no numerical iterations in the SA algorithm. Numerical results demonstrate the effectiveness of the SA algorithm.     

Optimal spacecraft rendezvous using the combination of aerodynamic force and Lorentz force

This paper presents a propellantless spacecraft rendezvous method by using the optimal combination of aerodynamic force and Lorentz force. Aerodynamic force is provided by the rotations of the plates attached to the spacecraft, and Lorentz force is achieved by modulating spacecraft's electrostatic charge. Considering the limitation of the charging level of the spacecraft and physical constraints of the plates system, an optimal open-loop rendezvous trajectory is designed, which aims to minimize the energy consumed to actuate the hybrid system. The rotation rates of the plates and the electrostatic charge are constrained in the optimization problem, which is solved via the Gauss pseudospectral method. To track the open-loop trajectory in the presence of external perturbations, a novel adaptive nonsingular terminal sliding mode controller is designed. The stability of the closed-loop system is proved by the Lyapunov-based method. Several numerical examples are conducted to verify the validity of both the open-loop and closed-loop control strategy.     

Optimal tracking and formation keeping near a general Keplerian orbit under nonlinear perturbations

This study presents a semi-analytic approach for optimal tracking and formation keeping with high precision. For a continuous-thrust propulsion system, optimal formation keeping problems near a general Keplerian orbit are formulated with respect to a reference trajectory which is an explicit function of time. A nonlinear optimal tracking control law is then derived in generic form as a function of the states by employing generating functions in the theory of Hamiltonian systems. The applicability of the overall process is not affected by the complexity of dynamics and the selection of coordinates. As it allows us to design a nonlinear optimal feedback controller in the Earth-centered inertial frame, a variety of nonlinear perturbations can be incorporated easily without complicated coordinate transformations. Numerical experiments demonstrate that the nonlinear tracking control logic achieves superior tracking accuracy and cost reduction by accommodating higher-order nonlinearities.     

Re-entry trajectory tracking of reusable launch vehicle using artificial delay based robust guidance law

A Reusable Launch Vehicle (RLV), during the re-entry phase of its flight, experiences uncertain environment and extreme turbulence. This calls for an effective control strategy to guide the vehicle efficiently on a trajectory that allows safer landing conditions while providing robustness against external disturbances and system uncertainties. In this regard, a Time-Delayed Control (TDC) strategy has been proposed to track the space vehicle on a predetermined trajectory in the presence of these uncertainties. In the proposed approach, the system vector and the uncertainties are lumped into a single function which is estimated using the input and output data from the previous instant. Theoretical analysis of the control strategy executed using Lyapunov’s method, proves Uniformly Ultimately Bounded (UUB) stability of the closed loop system. The efficacy of the proposed approach has been verified through simulation studies which affirm robust tracking of the optimal trajectory generated through Pseudo-Spectral method (PSM), in the presence of time-varying uncertainties.     

高超末段机动突防/精确打击弹道建模与优化

针对高超声速飞行器再入末段机动突防、精确打击问题,从最优控制角度出发,提出了一种考虑拦截弹动力学特性的最优机动突防弹道优化方法,获得了高超声速飞行器的最大机动能力。该方法将拦截弹运动模型引入突防弹道优化的模型中,通过施加约束限制拦截弹按照比例导引律飞行。根据飞行任务和交战双方的弹道特点分段,结合各段的任务和特性,分别提出了突防性能指标和精确打击性能指标等,并通过加权函数将各个独立、矛盾的性能指标统一,建立了多对象、多段、多约束机动突防弹道优化模型,采用Radau多段伪谱法（MRPM）进行求解。针对该问题求解的初值敏感、可行域窄等问题,提出了一系列弹道优化策略,提高了收敛速度和求解精度,最终获得了最优机动弹道,并通过协态映射原理对其最优性进行了验证。结果表明,该方法能充分发挥高超声速飞行器的机动能力,获得满足落点精度要求的突防弹道,相对已有方法,将脱靶量提高了1~2个量级。灵敏度分析表明,该弹道对拦截弹的发射时间不敏感。      

火星大气进入滑模自抗扰制导方法

针对火星探测器大气进入制导阶段存在着模型参数误差等不确定性,基于直接反馈线性化理论设计了一种滑模自抗扰进入制导方法。首先利用反馈线性化方法对跟踪系统模型进行线性化处理;在此基础上设计了滑模控制律,并利用线性扩张状态观测器估计系统的未知不确定量,在控制律中进行补偿;此外还给出了大气进入段的横向制导律。仿真结果表明,与反馈线性化方法相比,该方法设计的制导律有效地降低了模型参数误差对制导精度的影响,实现了对参考轨迹的良好跟踪,提高了探测器开伞点的精度。     

末端制导飞行轨迹的仿真与试飞

提出了战斗机完成制导装置末端制导阶段飞行轨迹的仿真和试飞方法.末端制导阶段的飞行轨迹要求进入段尽可能减小高度损失,并在俯冲段满足精确的轨迹跟踪.采用6自由度全量非线性方程,考虑纵向和横航向运动的相互耦合关系,通过对飞机的高速度、大俯冲角、大落差飞行全过程进行仿真研究,分析了3种利用滚转操纵进入俯冲的情况,获得了满足高精度飞行轨迹的操纵方案,即在进入段,先操纵副翼使滚转角接近180°,拉杆使俯冲角满足轨迹要求后,再反向操纵副翼使飞机正飞进入俯冲.通过飞行试验验证了方案的合理性和有效性.研究表明:该方法在保证飞行安全的前提下,提高了飞行轨迹精度和试飞效率.     

附着小天体的动态面鲁棒制导与控制方法

以精确附着小天体表面的任务为背景,提出一种基于扰动观测器(DOB)和动态面控制的附着小天体的制导与控制方法。根据探测器的初始条件与终端着陆条件规划了标称轨迹,并将引力场建模误差、参数摄动和外部干扰等视为总扰动,结合动态面控制和DOB设计了标称轨迹跟踪控制器。分析总扰动估计误差的渐进收敛性以及闭环标称轨迹跟踪控制系统的稳定性,并确定控制器参数选取条件。数值仿真结果表明,所设计的DOB可以有效地估计并抑制总扰动且闭环标称轨迹跟踪控制系统具有良好的稳定性和控制精度。     

基于自适应伪谱法的升力式飞行器火星进入段快速轨迹优化

针对升力式火星飞行器定点着陆任务的轨迹优化问题，给出了基于自适应伪谱法的快速优化算法.综合考虑探测器火星大气进入过程中的动力学约束、边界约束、路径约束以及控制约束条件，利用自适应伪谱法将轨迹优化问题转换为离散的非线性规划问题，采用序列二次规划算法进行求解，得到性能指标最优的进入轨迹.通过仿真验证，给出了实现火星进入过程燃料消耗最优的状态量和控制量轨迹.仿真结果表明，在Matlab中采用自适应伪谱法，能够在800s内采用267个配点，给出近似精度为10-6的火星进入过程中消耗能量最优的参考轨迹.      

再入飞行器末端能量管理段纵向剖面优化方法

摘要： 对于轨道再入飞行器,根据各阶段飞行特性和任务的不同被分为初期再入、末端能量管理以及进场着陆几个阶段.本文提出一种末端能量管理段航程及纵向剖面优选方法,通过对不同的初始航程和纵向剖面进行递推,以阻力板控制裕度最大为优化目标,选出最适应飞行器升阻特性的航程以及相应的高度动压剖面.考虑初始状态误差及气动特性偏差条件下的六自由度仿真验证所设计的纵向剖面的鲁棒性.