The Wavelet Analysis of the Solar and Cosmic-Ray Data

Results of the wavelet power spectrum (WPS) analysis(which covers the 1969–1998 years) obtained using the daily data of the following parameters: (i) the Mt. Wilson Magnetic Plage Strength index (MPSI), (ii) the solar LDE-type flare index (LDE-FI) and (iii) the Calgary cosmic-ray (CR) intensity, are reported for periods ranging between 64 and 1024 days. The temporal distribution of the WPS during the last three solar activity cycles is extremely discontinuous. A clear resemblance between the CR and LDE-FI WPS is obtained only for the 22nd solar activity cycle. Nevertheless, the CR multiperiod peak, observed in 1982, can well be identified with the WPS peaks obtained in both solar parameters under consideration. In the 21st cycle, we found significant the MPSI periods around 850–880 days (2.3–2.4 yr), while such periods are present in the LDE-FI data of the 22nd cycle. In the CR data we discerned a net periodicity around 650 days (1.7 yr). This revised version was published online in August 2006 with corrections to the Cover Date.     

The Solar and Cosmic-Ray Synodic Periodicity (1969–1998)

The synodic recurrence of the Mt. Wilson plage index (MPSI) and the Calgary cosmic ray (CR) intensity is investigated, using the wavelet power spectra in the range of 18–38 days, during the last three solar cycles. The unique temporal coincidence between the quasi–synodic MPSI and the CR periods is detected in 1978–1982 (the 21st solar cycle). In the 22nd cycle there is a very strong MPSI synodic recurrence, from 1989.5 to 1990.5, but it is absent in the CR data. In 1992.5–1993.5 the MPSI and CR recurrence phenomenon is in good accordance with the solar wind speed and cosmic ray modulation as measured during the first Ulysses passage around the Sun. The Gnevyshev gap is present in the 27-day recurrence of CR, in agreement with Kudela et al. (1999). This revised version was published online in August 2006 with corrections to the Cover Date.     

Interior Evolution of Mercury

The interior evolution of Mercury—the innermost planet in the solar system, with its exceptional high density—is poorly known. Our current knowledge of Mercury is based on observations from Mariner 10’s three flybys. That knowledge includes the important discoveries of a weak, active magnetic field and a system of lobate scarps that suggests limited radial contraction of the planet during the last 4 billion years. We review existing models of Mercury’s interior evolution and further present new 2D and 3D convection models that consider both a strongly temperature-dependent viscosity and core cooling. These studies provide a framework for understanding the basic characteristics of the planet’s internal evolution as well as the role of the amount and distribution of radiogenic heat production, mantle viscosity, and sulfur content of the core have had on the history of Mercury’s interior. The existence of a dynamo-generated magnetic field suggests a growing inner core, as model calculations show that a thermally driven dynamo for Mercury is unlikely. Thermal evolution models suggest a range of possible upper limits for the sulfur content in the core. For large sulfur contents the model cores would be entirely fluid. The observation of limited planetary contraction (∼1–2 km)—if confirmed by future missions—may provide a lower limit for the core sulfur content. For smaller sulfur contents, the planetary contraction obtained after the end of the heavy bombardment due to inner core growth is larger than the observed value. Due to the present poor knowledge of various parameters, for example, the mantle rheology, the thermal conductivity of mantle and crust, and the amount and distribution of radiogenic heat production, it is not possible to constrain the core sulfur content nor the present state of the mantle. Therefore, it is difficult to robustly predict whether or not the mantle is conductive or in the convective regime. For instance, in the case of very inefficient planetary cooling—for example, as a consequence of a strong thermal insulation by a low conductivity crust and a stiff Newtonian mantle rheology—the predicted sulfur content can be as low as 1 wt% to match current estimates of planetary contraction, making deep mantle convection likely. Efficient cooling—for example, caused by the growth of a crust strongly in enriched in radiogenic elements—requires more than 6.5 wt% S. These latter models also predict a transition from a convective to a conductive mantle during the planet’s history. Data from future missions to Mercury will aid considerably our understanding of the evolution of its interior.     

Space Weather Research in China

Recent progress in space weather research are briefly presented here from three aspects: establishment or improvement in observation systems, such as extra-soft X-ray detector and γ-ray detector onboard the spacecraft ‘Shen Zhou 2’, new solar radio broad-band spectrometer, magnetometer-chain, ionosonde and digisonde–chain, laser-lidar system and VHF radar; partial topic progresses included in CMEs, multi-streamer structures, evolution of interplanetary magnetic field B _z component, regional properties of traveling ionospheric disturbances, a fully-nonlinear global dynamical model for the middle and upper atmosphere, and a combined prediction method for geomagnetic disturbances; and space weather activity, such as ‘Meridian Project’ — a national major scientific project, ‘International Space Weather Meridian Circle Program’ — a suggestion of internationalization of ‘Meridian Project’, ‘Space Weather Research Plan’ — a major research plan from National Natural Science Foundation of China (NNSFC) and other space weather activities. This revised version was published online in August 2006 with corrections to the Cover Date.     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

Mupus – A Thermal and Mechanical Properties Probe for the Rosetta Lander Philae

MUPUS, the multi purpose sensor package onboard the Rosetta lander Philae, will measure the energy balance and the physical parameters in the near-surface layers – up to about 30 cm depth- of the nucleus of Rosetta’s target comet Churyumov-Gerasimenko. Moreover it will monitor changes in these parameters over time as the comet approaches the sun. Among the parameters studied are the density, the porosity, cohesion, the thermal diffusivity and conductivity, and temperature. The data should increase our knowledge of how comets work, and how the coma gases form. The data may also be used to constrain the microstructure of the nucleus material. Changes with time of physical properties will reveal timescales and possibly the nature of processes that modify the material close to the surface. Thereby, the data will indicate how pristine cometary matter sampled and analysed by other experiments on Philae really is.     

The Analyzer of Space Plasmas and Energetic Atoms (ASPERA-3) for the Mars Express Mission

The general scientific objective of the ASPERA-3 experiment is to study the solar wind – atmosphere interaction and to characterize the plasma and neutral gas environment with within the space near Mars through the use of energetic neutral atom (ENA) imaging and measuring local ion and electron plasma. The ASPERA-3 instrument comprises four sensors: two ENA sensors, one electron spectrometer, and one ion spectrometer. The Neutral Particle Imager (NPI) provides measurements of the integral ENA flux (0.1–60 keV) with no mass and energy resolution, but high angular resolution. The measurement principle is based on registering products (secondary ions, sputtered neutrals, reflected neutrals) of the ENA interaction with a graphite-coated surface. The Neutral Particle Detector (NPD) provides measurements of the ENA flux, resolving velocity (the hydrogen energy range is 0.1–10 keV) and mass (H and O) with a coarse angular resolution. The measurement principle is based on the surface reflection technique. The Electron Spectrometer (ELS) is a standard top-hat electrostatic analyzer in a very compact design which covers the energy range 0.01–20 keV. These three sensors are located on a scanning platform which provides scanning through 180^∘ of rotation. The instrument also contains an ion mass analyzer (IMA). Mechanically IMA is a separate unit connected by a cable to the ASPERA-3 main unit. IMA provides ion measurements in the energy range 0.01–36 keV/charge for the main ion components H⁺, He⁺⁺, He⁺, O⁺, and the group of molecular ions 20–80 amu/q. ASPERA-3 also includes its own DC/DC converters and digital processing unit (DPU).     

基于机载单天线雷达一维距离数据的地表三维信息优化重建方法

陆地的刚体表面在机载雷达的任意相对运动下具有几何不变性,基于此约束可利用雷达距离像中提取出的地面多个强散射点的一维距离数据,重建出地表的三维信息以及载机未知的运动轨迹.鉴于现有基于雷达远场假设的重建方法无法适用于具有较大近场误差的地面目标重建的问题,提出一种基于雷达近场几何模型的优化重建方法,采用非线性优化方法实现了对...     

The Mercury Atmospheric and Surface Composition Spectrometer for the MESSENGER Mission

The Mercury Atmospheric and Surface Composition Spectrometer (MASCS) is one of seven science instruments onboard the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft en route to the planet Mercury. MASCS consists of a small Cassegrain telescope with 257-mm effective focal length and a 50-mm aperture that simultaneously feeds an UltraViolet and Visible Spectrometer (UVVS) and a Visible and InfraRed Spectrograph (VIRS). UVVS is a 125-mm focal length, scanning grating, Ebert-Fastie monochromator equipped with three photomultiplier tube detectors that cover far ultraviolet (115–180 nm), middle ultraviolet (160–320 nm), and visible (250–600 nm) wavelengths with an average 0.6-nm spectral resolution. It will measure altitude profiles of known species in order to determine the composition and structure of Mercury’s exosphere and its variability and will search for previously undetected exospheric species. VIRS is a 210-mm focal length, fixed concave grating spectrograph equipped with a beam splitter that simultaneously disperses the spectrum onto a 512-element silicon visible photodiode array (300–1050 nm) and a 256-element indium-gallium-arsenide infrared photodiode array 850–1,450 nm. It will obtain maps of surface reflectance spectra with a 5-nm resolution in the 300–1,450 nm wavelength range that will be used to investigate mineralogical composition on spatial scales of 5 km. UVVS will also observe the surface in the far and middle ultraviolet at a 10-km or smaller spatial scale. This paper summarizes the science rationale and measurement objectives for MASCS, discusses its detailed design and its calibration requirements, and briefly outlines observation strategies for its use during MESSENGER orbital operations around Mercury.     

ART算法几种重建模型的研究和比较

代数重建法(AlgebraicReconstructionTechniques,ART)适合于不完全投影数据的图像重建;其缺点是重建时间长,因而提高该算法的重建速度一直是研究的热点。本文对影响ART算法的几种重建模型进行了研究,并通过仿真数据分别对几种重建模型进行了成像数值实验。分析和比较了各种重建模型的重建速度和重建质量。     

Clusters of Galaxies: Setting the Stage

Clusters of galaxies are self-gravitating systems of mass ∼10¹⁴–10¹⁵ h ⁻¹ M_⊙ and size ∼1–3h ⁻¹ Mpc. Their mass budget consists of dark matter (∼80%, on average), hot diffuse intracluster plasma (≲20%) and a small fraction of stars, dust, and cold gas, mostly locked in galaxies. In most clusters, scaling relations between their properties, like mass, galaxy velocity dispersion, X-ray luminosity and temperature, testify that the cluster components are in approximate dynamical equilibrium within the cluster gravitational potential well. However, spatially inhomogeneous thermal and non-thermal emission of the intracluster medium (ICM), observed in some clusters in the X-ray and radio bands, and the kinematic and morphological segregation of galaxies are a signature of non-gravitational processes, ongoing cluster merging and interactions. Both the fraction of clusters with these features, and the correlation between the dynamical and morphological properties of irregular clusters and the surrounding large-scale structure increase with redshift. In the current bottom-up scenario for the formation of cosmic structure, where tiny fluctuations of the otherwise homogeneous primordial density field are amplified by gravity, clusters are the most massive nodes of the filamentary large-scale structure of the cosmic web and form by anisotropic and episodic accretion of mass, in agreement with most of the observational evidence. In this model of the universe dominated by cold dark matter, at the present time most baryons are expected to be in a diffuse component rather than in stars and galaxies; moreover, ∼50% of this diffuse component has temperature ∼0.01–1 keV and permeates the filamentary distribution of the dark matter. The temperature of this Warm-Hot Intergalactic Medium (WHIM) increases with the local density and its search in the outer regions of clusters and lower density regions has been the quest of much recent observational effort. Over the last thirty years, an impressive coherent picture of the formation and evolution of cosmic structures has emerged from the intense interplay between observations, theory and numerical experiments. Future efforts will continue to test whether this picture keeps being valid, needs corrections or suffers dramatic failures in its predictive power.     

V: SEA LEVEL: Benefits of GRACE and GOCE to sea level studies

The recently published Third Assessment Reports of the Intergovernmental Panel on Climate Change have underlined the scientific interest in, and practical importance of past and potential future sea level changes. Space gravity missions will provide major benefits to the understanding of the past, and, thereby, in the prediction of future, sea level changes in many ways. The proposal for the GOCE mission described well the improvements to be expected from improved gravity field and geoid models in oceanography (for example, in the measurement of the time-averaged, or ‘steady state’, ocean surface circulation and better estimation of ocean transports), in geophysics (in the improvement of geodynamic models for vertical land movements), in geodesy (in positioning of tide gauge data into the same reference frame as altimeter data, and in improvement of altimeter satellite orbits), and possibly in glaciology (in improved knowledge of bedrock topography and ice sheet mass fluxes). GRACE will make many important steps towards these ‘steady state’ aims. However, its main purpose is the provision of oceanographic (and hydrological and meteorological) temporally-varying gravity information, and should in effect function as a global ‘bottom pressure recorder’, providing further insight into the 3-D temporal variation of the ocean circulation, and of the global water budget in general. This paper summaries several of these issues, pointing the way towards improved accuracy of prediction of future sea level change. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rayleigh Wave Ellipticity Modeling and Inversion for Shallow Structure at the Proposed InSight Landing Site in Elysium Planitia,Mars

The SEIS (Seismic Experiment for Interior Structure) instrument onboard the InSight mission will be the first seismometer directly deployed on the surface of Mars. From studies on the Earth and the Moon, it is well known that site amplification in low-velocity sediments on top of more competent rocks has a strong influence on seismic signals, but can also be used to constrain the subsurface structure. Here we simulate ambient vibration wavefields in a model of the shallow sub-surface at the InSight landing site in Elysium Planitia and demonstrate how the high-frequency Rayleigh wave ellipticity can be extracted from these data and inverted for shallow structure. We find that, depending on model parameters, higher mode ellipticity information can be extracted from single-station data, which significantly reduces uncertainties in inversion. Though the data are most sensitive to properties of the upper-most layer and show a strong trade-off between layer depth and velocity, it is possible to estimate the velocity and thickness of the sub-regolith layer by using reasonable constraints on regolith properties. Model parameters are best constrained if either higher mode data can be used or additional constraints on regolith properties from seismic analysis of the hammer strokes of InSight’s heat flow probe HP³ are available. In addition, the Rayleigh wave ellipticity can distinguish between models with a constant regolith velocity and models with a velocity increase in the regolith, information which is difficult to obtain otherwise.     

Remote Sensing of H from Ulysses and Galileo

We model interplanetary H Lyman-α (Lα) observations from Galileo UVS (Ultraviolet Spectrometer) and EUVS (Extreme Ultraviolet Spectrometer) (Hord et al., 1992) and the Ulysses interstellar neutral gas (GAS) instrument (Witte et al., 1992). EUVS measurements near solar maximum (max) in 1990–1992 have a peaked brightness maximum upwind due to a rather isotropic solar wind charge-exchange ionization pattern (A=0–0.25). GAS measurements from solar minimum (min) in 1997 have a plateau in the upwind direction that we model using Ulysses SWOOPS (solar wind plasma experiment) solar min data on solar wind density and velocity at different heliographic latitudes. The isotropic ionization pattern deduced from EUVS at solar max may be consistent with recent SWOOPS results (McComas et al., 2000b, c) that high speed solar wind is absent at high latitudes during solar max. Galileo and Ulysses Lα data favor higher H temperatures (15 000–18 000 K) than previous models. This revised version was published online in August 2006 with corrections to the Cover Date.     

Presolar Grains in Meteorites and Their Compositions

Small amounts of pre-solar “stardust” grains have survived in the matrices of primitive meteorites and interplanetary dust particles. These grains—formed directly in the outflows of or from the ejecta of stars—include thermally and chemically refractory carbon materials such as diamond, graphite and silicon carbide; as well as refractory oxides and nitrides. Pre-solar silicates, which have only recently been identified, are the most abundant type except for possibly diamond. The detailed study with modern analytical tools, of isotopic signatures in particular, provides highly accurate and detailed information with regard to stellar nucleosynthesis and grain formation in stellar atmospheres. Important stellar sources are Red Giant (RG) and Asymptotic Giant Branch (AGB) stars, with supernova contributions apparently small. The survival of those grains puts constraints on conditions they were exposed to in the interstellar medium and in the early solar system.     

Advanced Technologies Demonstrated by the Miniature Integrated Camera and Spectrometer (MICAS) Aboard Deep Space 1

MICAS is an integrated multi-channel instrument that includes an ultraviolet imaging spectrometer (80–185 nm), two high-resolution visible imagers (10–20 μrad/pixel, 400–900 nm), and a short-wavelength infrared imaging spectrometer (1250–2600 nm). The wavelength ranges were chosen to maximize the science data that could be collected using existing semiconductor technologies and avoiding the need for multi-octave spectrometers. It was flown on DS1 to validate technologies derived from the development of PICS (Planetary Imaging Camera Spectrometer). These technologies provided a novel systems approach enabling the miniaturization and integration of four instruments into one entity, spanning a wavelength range from the UV to IR, and from ambient to cryogenic temperatures with optical performance at a fraction of a wavelength. The specific technologies incorporated were: a built-in fly-by sequence; lightweight and ultra-stable, monolithic silicon-carbide construction, which enabled room-temperature alignment for cryogenic (85–140 K) performance, and provided superb optical performance and immunity to thermal distortion; diffraction-limited, shared optics operating from 80 to 2600 nm; advanced detector technologies for the UV, visible and short-wavelength IR; high-performance thermal radiators coupled directly to the short-wave infrared (SWIR) detector optical bench, providing an instrument with a mass less than 10 kg, instrument power less than 10 W, and total instrument cost of less than ten million dollars. The design allows the wavelength range to be extended by at least an octave at the short wavelength end and to ∼50 microns at the long wavelength end. Testing of the completed instrument demonstrated excellent optical performance down to 77 K, which would enable a greatly reduced background for longer wavelength detectors. During the Deep Space 1 Mission, MICAS successfully collected images and spectra for asteroid 9969 Braille, Mars, and comet 19/P Borrelly. The Borrelly encounter was a scientific hallmark providing the first clear, high resolution images and excellent, short-wavelength infrared spectra of the surface of an active comet’s nucleus.     

Effects of Low Energetic Neutral Atoms on Martian and Venusian Dayside Exospheric Temperature Estimations

The heating of the upper atmospheres and the formation of the ionospheres on Venus and Mars are mainly controlled by the solar X-ray and extreme ultraviolet (EUV) radiation (λ = 0.1–102.7 nm and can be characterized by the 10.7 cm solar radio flux). Previous estimations of the average Martian dayside exospheric temperature inferred from topside plasma scale heights, UV airglow and Lyman-α dayglow observations of up to ∼500 K imply a stronger dependence on solar activity than that found on Venus by the Pioneer Venus Orbiter (PVO) and Magellan spacecraft. However, this dependence appears to be inconsistent with exospheric temperatures (<250 K) inferred from aerobraking maneuvers of recent spacecraft like Mars Pathfinder, Mars Global Surveyor and Mars Odyssey during different solar activity periods and at different orbital locations of the planet. In a similar way, early Lyman-α dayglow and UV airglow observations by Venera 4, Mariner 5 and 10, and Venera 9–12 at Venus also suggested much higher exospheric temperatures of up to 1000 K as compared with the average dayside exospheric temperature of about 270 K inferred from neutral gas mass spectrometry data obtained by PVO. In order to compare Venus and Mars, we estimated the dayside exobase temperature of Venus by using electron density profiles obtained from the PVO radio science experiment during the solar cycle and found the Venusian temperature to vary between 250–300 K, being in reasonable agreement with the exospheric temperatures inferred from Magellan aerobraking data and PVO mass spectrometer measurements. The same method has been applied to Mars by studying the solar cycle variation of the ionospheric peak plasma density observed by Mars Global Surveyor during both solar minimum and maximum conditions, yielding a temperature range between 190–220 K. This result clearly indicates that the average Martian dayside temperature at the exobase does not exceed a value of about 240 K during high solar activity conditions and that the response of the upper atmosphere temperature on Mars to solar activity near the ionization maximum is essentially the same as on Venus. The reason for this discrepancy between exospheric temperature determinations from topside plasma scale heights and electron distributions near the ionospheric maximum seems to lie in the fact that thermal and photochemical equilibrium applies only at altitudes below 170 km, whereas topside scale heights are derived for much higher altitudes where they are modified by transport processes and where local thermodynamic equilibrium (LTE) conditions are violated. Moreover, from simulating the energy density distribution of photochemically produced moderately energetic H, C and O atoms, as well as CO molecules, we argue that exospheric temperatures inferred from Lyman-α dayglow and UV airglow observations result in too high values, because these particles, as well as energetic neutral atoms, transformed from solar wind protons into hydrogen atoms via charge exchange, may contribute to the observed planetary hot neutral gas coronae. Because the low exospheric temperatures inferred from neutral gas mass spectrometer and aerobraking data, as well as from CO⁺ ₂ UV doublet emissions near 180–260 nm obtained from the Mars Express SPICAM UV spectrograph suggest rather low heating efficiencies, some hitherto unidentified additional IR-cooling mechanism in the thermospheres of both Venus and Mars is likely to exist. An erratum to this article can be found at     

Perpendicular Shock Reformation and Ion Acceleration

Kinetic simulations of supercritical, quasi-perpendicular shocks yield time-varying solutions that cyclically reform on proton spatio-temporal scales. Whether a shock solution is stationary or reforming depends upon the plasma parameters which, for SNR shocks and the heliospheric termination shock, are ill defined but believed to be within this time-dependent regime. We first review the time-dependent solutions and the acceleration processes of the ions for a proton–electron plasma. We then present recent results for a three-component plasma: background protons, electrons and a second ion population appropriate for SNR (heavy ions) or the termination shock (pickup protons). This ion acceleration generates a suprathermal “injection” population – a seed population for subsequent acceleration at the shock, which may in turn generate ions at cosmic ray energies.     

Observation of the interstellar helium cone by the NOZOMI spacecraft

‘The Japanese Mars probe, NOZOMI, is staying in the interplanetary space (1–1.5 AU) until its Mars’ orbit insertion scheduled in early 2004. Every 16 months on this interplanetary orbit the spacecraft crosses around 1 AU the ‘gravitational focusing cone’ of the interstellar helium, which are penetrating into the inner heliosphere under the solar gravity. During the first crossing of the cone in the season of March–May 2000, we observed these helium particles after the solar wind pickup process with an E/q type ion detector aboard NOZOMI. We have estimated the original temperature of the interstellar helium as 11 000 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

基于波长调制技术的燃烧室出口温度分布TDLAT测试方法

为给未来高推质比航空发动机燃烧室出口温度分布测试作技术储备,以某单管燃烧室为研究对象,采用可调谐半导体激光吸收层析成像(TDLAT)技术,在0.5～0.8 MPa压力环境下,研究了基于波长调制(WMS)技术的燃烧室出口温度分布测试方法的工程适用性。结果表明：通过多光路正交测量的方式,利用扣除背景的归一化波长调制光谱模型、变量轮换迭代反演及计算层析(CT)技术,可以实现具有时空分辨性的燃烧室出口温度分布式测量;场分布重建结果能够较正确地反映出燃气温度和H₂O气体积分数随进口参数变化的趋势与特征;受燃烧流场的不均匀性、光谱模型建立与光谱参数标定的不准确、反演与重建算法的不完善等因素的影响,TDLAS测温均值低于热电偶测量结果,相对误差在15%～23%之间,测量数据的准确度距工程应用需求还有一定的差距。