基于更新法估计空闲时间的Inter-DVS算法的优化与实现

动态电压调整(DVS)技术是软件节能技术的另一种形式。由于CMOS电路的能耗和供电电压的平方及频率成正比关系,所以降低供电电压和频率是减少能耗的最有效方法之一。本文首先对DVS的各种算法作了详细的分类分析。然后,以"使用更新法"估计空闲时间的任务间DVS算法为例,采用嵌入式Linux操作系统对其进行了优化。最后,讨论了实现具有动态电压调解功能的嵌入式Linux操作系统的节能方法。     

一种移动卫星网络最小费用切换算法(英文)

For mobile satellite networks, an appropriate handover scheme should be devised to shorten handover delay with optimized application of network resources. By introducing the handover cost model of service, this article proposes a rerouting triggering scheme for path optimization after handover and a new minimum cost handover algorithm for mobile satellite networks. This algorithm ensures the quality of service （QoS） parameters, such as delay, during the handover and minimizes the handover costs. Simulation indicates that this algorithm is superior to other current algorithms in guaranteeing the QoS and decreasing handover costs.     

基于云蚁群算法的高效节能氩弧焊工艺参数优化研究

为在氩弧焊加工过程中提升效率的同时降低能耗,研究了一种氩弧焊高效节能工艺参数的多目标优化模型及算法。首先确定了以焊接速度及焊接电流为优化变量,在综合考虑焊接设备、工件特性、操作方法及焊接质量等约束的前提下,建立了以最小电能消耗以及最短加工时长为优化目标的多目标工艺参数优化模型;提出一种基于云模型的蚁群算法(CBACO)以对所构建的优化模型进行求解,其中包含一种适当的编码方式、一种局部与全局相结合的探索策略、一种基于云模型的变异因子、传统的单点交叉因子、单形交叉因子以及适当的选择策略;通过一个针对某航空器油箱的焊接实例,对所提出的优化模型及算法的实用性进行了验证,结果表明优化参数可在保证加工质量的前提下有效地节省时间60.41%~69.05%,节省电能34.88%~46.30%。     

Proactive optimization of transmission power and 3D trajectory in UAV-assisted relay systems with mobile ground users

In this paper, an Unmanned Aerial Vehicle (UAV)-assisted relay communication system is studied, where a UAV is served as a flying relay to maintain a communication link between a mobile source node and a remote destination node. Specifically, an average outage probability minimization problem is formulated firstly, with the constraints on the transmission power of the source node, the maximum energy consumption budget, the transmission power, the speed and acceleration of the flying UAV relay. Next, the closed-form of outage probability is derived, under the hybrid line-of-sight and non-line-of-sight probability channel model. To deal with the formulated nonconvex optimization, a long-term proactive optimization mechanism is developed. In particular, firstly, an approximation for line-of-sight probability and a reformulation of the primal problem are given, respectively. Then, the reformulated problem is transformed into two subproblems: one is the transmission power optimization with given UAV’s trajectory and the other is the trajectory optimization with given transmission power allocation. Next, two subproblems are tackled via tailoring primal–dual subgradient method and successive convex approximation, respectively. Furthermore, a proactive optimization algorithm is proposed to jointly optimize the transmission power allocation and the three-dimensional trajectory. Finally, simulation results demonstrate the performance of the proposed algorithm under various parameter configurations.     

电机-变距螺旋桨动力系统功率优化控制

电动螺旋桨无人机应用越来越普及,但普遍续航时间较短,提高电动力系统效率、降低功率消耗是提高航时的主要措施。电机-变距螺旋桨动力系统（以下简称变距电动力系统）可同时改变转速、桨距两个量,存在桨距和转速的最佳组合,使系统功率最小。相比电机-定距螺旋桨动力系统,其在耗能方面具有特殊优势,但如何达到最小功率点,目前研究较少。针对上述问题,为提高计算效率,便于控制研究工作的开展,首先基于改进天牛须算法的BP神经网络训练得到变距电动力系统的神经网络代理模型。接着提出了一种变距电动力系统功率优化控制策略：在一定入流速度、拉力需求下,基于自适应扩展卡尔曼滤波-牛顿法实时优化桨距,并在一定桨距下利用模糊PID控制系统转速以达目标拉力,实现目标拉力需求下的最小功率控制。仿真验证结果表明,提出的功率优化控制策略鲁棒性更强、优化速度更快、收敛效果更好。     

直升机/发动机系统变旋翼转速串行优化方案

提出了一种用于直升机/涡轴发动机综合控制的变旋翼转速串行优化方案.首先基于Levenberg-Marquarat(L-M)算法/一维最优搜索算法,在保证直升机飞行状态不变的情况下,寻优得到旋翼所需最小功率,再通过优化发动机操纵量,在保证发动机约束成立的条件下得到当前发动机运行最优工作点,即达到直升机巡航时油耗最小或者涡轮前温度最低.最后,在UH-60直升机/涡轴发动机综合控制仿真平台上进行了最小油耗控制模式的仿真,数字仿真结果表明了该串行优化方案的可行性.      

MIMO雷达射频隐身性能优化的目标跟踪算法

随着现代战场中电子对抗的日益激烈,雷达的生存环境受到了严重的威胁。射频（RF）隐身技术是一种提高雷达及其运载平台战场生存能力的重要途径。为提高雷达射频隐身性能,针对具有MIMO探测模式的新体制雷达提出了隐身性能优化的目标跟踪算法。该算法基于射频隐身性能优化模型,通过自适应控制系统的子阵划分个数、平均发射功率、波束驻留时间以及采样周期,在满足系统跟踪性能要求的前提下优化系统射频隐身性能,其中的射频隐身性能综合考虑了截获因子及采样周期。仿真结果表明,与传统相控阵雷达相比,本文所提出的目标跟踪算法使MIMO雷达具有更好的射频隐身性能。     

电机控制及配电系统备件优化配置

为了提高舰船电力系统的运行安全性和设计科学性,研究了舰船电力系统电机控制及配电系统的备件设置对电力系统脆弱性的影响。提出了综合考虑降低费用、重量、体积等约束条件,以多尺度综合脆弱度范数最小与资源消耗规模最小为双目标的优化模型;根据满足率的要求确定舰船电力系统电机控制及配电系统的初始备件配置方案,再利用边际优化方法得到最优备件配置方案。实现在网络结构不变的前提下,通过合理配置节点元件备件数量,达到提高舰船电力系统健壮性的目的。最后以复杂环形舰船电力系统为例对模型及算法进行了验证。     

综合模块化航空电子系统节能分层调度的设计(英文)

近年来,综合模块化航空电子(Integrated Modular Avionics,IMA)构架逐渐流行,并通过引入资源分区的概念取代了传统的联合式系统构架。研究了IMA构架下分层调度的设计问题。调度模型通过强时间分区,使多个强实时应用方便地集成在一个单处理器平台。推导出分区周期、分区系数以及可调度性在实时条件下的数学关系,并提出了分区参数的优化算法。考虑具有任意时限的实时任务模型,提高了算法的通用性。在分层调度的基础上,通过有效利用松弛时间,提出一种能量优化方法,进一步减少了飞行器上嵌入式系统的能耗。实验结果表明,本文提出的系统设计方法在保证硬实时需求的基础上,有效的降低能耗达 14%。     

相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

大型后掠自适应风力机叶片的气动扭角设计优化

针对大型后掠式自适应叶片(STB)中显著的气动/结构耦合现象,利用优化方法探讨了直叶片转化为后掠式自适应叶片后的气动扭角补偿优化,STB叶片没有不改变原直叶片的输出功率和结构强度。优化算法采用遗传算法,以功率为约束条件,扭角分布为优化变量,优化目标为叶片根部应力最小。建立了叶片的气动模型和六自由度铁摩辛科悬臂梁结构模型,叶片的气动特性分析采用了基于动量叶素理论的数值算法,结构特性分析采用有限元法,优化算法采用遗传算法。最后在额定风速条件下,完成了2.0MW叶片的气动扭角的补偿设计优化。分析结果表明,STB叶片通过扭角补偿后,可满足功率输出的要求,并大幅降低叶片的轴向推力。     

Embryonic array configuration optimization method based on reliability and hardware consumption

Embryonic Array(EA) with different configuration methods will directly affect its reliability and hardware consumption. At present, EA configuration design is lack of quantitative analysis method. In order to reasonably optimize EA configuration design, an EA configuration optimization design method is proposed, which is based on the constraints of EA hardware consumption and reliability. Through the analysis of EA working process and composition, quantitative analysis of EA reliability and hardware consumption are completed. Based on the constraints of EA hardware consumption and reliability, the mathematical model of EA configuration optimization design is established, which transfers EA configuration optimization design into an integer nonlinear programming model problem. According to the difference of the fitness value of individual waiting for mutation in population, adaptive mutation operator and crossover operator are selected, and a novel Modified Adaptive Differential Evolution(MADE) algorithm is proposed,which is used to solve EA configuration optimization design problem. Simulation experiments and analysis indicate that the MADE is able to effectively improve the speed, accuracy and stability of algorithm. Moreover, the proposed EA configuration optimization design method can select the most reasonable EA configuration design, and play an important guiding role in EA optimization design.     

Energy-efficiency maximization for fixed-wing UAV-enabled relay network with circular trajectory

With the development of Unmanned Aerial Vehicles (UAVs), the applications of UAVs have been extensively explored. In the field of wireless communications, the relay nodes are often used to extend network coverage. However, traditional fixed ground relays cannot be flexibly deployed due to their low heights and fixed locations. Hence, deploying UAV as relay node is a promising solution and has become a research hotspot. In this paper, we consider an UAV-enabled relaying network in which a fixed-wing UAV is deployed between the Base Station (BS) and Ground Users (GUs). We study the energy-efficiency gap between the link “BS-UAV-GUs” and the link “BS-GUs”, and jointly optimize UAV relay transmission power and flight radius to achieve the highest energy-efficiency. Firstly, the UAV/BS-GUs channels models and the UAV energy consumption model are built. Secondly, the optimization objective function is formulated to maximize the energy-efficiency gap. Then, the solution of the optimization problem is divided into a two-step iteration process, in which the UAV relay transmission power and flight radius are adjusted to maximize the energy-efficiency gap. Finally, the experimental results under different simulation scenarios (such as cities, forests, deserts, oceans, etc.) are shown to illustrate the effectiveness of the proposed algorithm. The results show that the proposed algorithm can always find the optimal UAV relay transmission power and flight radius settings, and achieve the largest energy-efficiency gap. The convergency speed of the proposed algorithm is fast, and can obtain the optimal solution within only a few iterations.     

On the Limitations of Random Sensor Placement for Distributed Signal Detection

We consider the design of a sensor network for detecting an emitter which if present is known to be located in an interval but whose exact position is unknown. We seek to minimize the total system power consumption subject to detection performance constrains by carefully choosing the thresholds and positions of the sensors. Toward this goal, we propose an iterative algorithm for the optimization problem. Numerical results are given to provide insights into the design of such networks. We show that random sensor placement can perform poorly, in contrast to what many currently believe.     

Reinforcement learning based dynamic distributed routing scheme for mega LEO satellite networks

Recently, mega Low Earth Orbit (LEO) Satellite Network (LSN) systems have gained more and more attention due to low latency, broadband communications and global coverage for ground users. One of the primary challenges for LSN systems with inter-satellite links is the routing strategy calculation and maintenance, due to LSN constellation scale and dynamic network topology feature. In order to seek an efficient routing strategy, a Q-learning-based dynamic distributed Routing scheme for LSNs (QRLSN) is proposed in this paper. To achieve low end-to-end delay and low network traffic overhead load in LSNs, QRLSN adopts a multi-objective optimization method to find the optimal next hop for forwarding data packets. Experimental results demonstrate that the proposed scheme can effectively discover the initial routing strategy and provide long-term Quality of Service (QoS) optimization during the routing maintenance process. In addition, comparison results demonstrate that QRLSN is superior to the virtual-topology-based shortest path routing algorithm.     

填充函数法在发动机加力最小油耗模式控制中的应用

主要研究了航空发动机性能寻优控制(PSC)算法问题。提出一种用于解决非线性约束优化问题的基于填充函数方法(FFM)的实时优化控制策略。通过构造填充函数,该算法可以在优化计算过程中能够不断跳出局部最优点,使得算法本身具备了全局寻优能力。详细介绍了其算法主要内容与实现途径,基于上述的填充函数优化算法,以某型涡扇发动机加力最小油耗优化控制模式为仿真算例,验证了该算法在解决航空发动机性能寻优控制问题时,相比传统的序列线性规划方法在全局寻优方面具有更好的效果。     

基于梯度下降法的翼伞系统最优分段航迹规划

传统最优控制航迹规划一般以逆风精确着陆、控制能量小为优化目标，但传统最优控制的操纵过程一般是一条连续变化的曲线，工程上不易实施；与之相比，传统分段航迹规划操纵简单，工程上容易实施，能实现逆风精确着陆的目标，但控制能耗大。为了兼顾逆风精确着陆、能耗低和控制操作简单等目标，提出了一种基于梯度下降法的翼伞最优分段航迹规划方法。该方法将控制变量参数化，将逆风精确着陆、控制能耗小、能实现避障等多目标优化问题转化为加权单目标优化问题，并通过梯度下降法求解得到分段常值最优归航航迹。所提算法与基于伪谱法的最优控制规划航迹和基于遗传算法的分段规划航迹进行了对比，算法仿真结果表明本文提出的最优分段航迹规划法既可以实现着陆精度高、控制能量小、逆风着陆和避障的优化目标，同时规划的航迹又由分段常值实现控制，工程上容易实施，兼顾了最优控制航迹规划和分段航迹规划的优点。     

基于试验设计-遗传算法的船用柴油机冷却系统多目标优化

为了获取某型船用柴油机冷却系统的最佳运行参数,在柴油机可靠运行的前提下,尽量提升动力性和经济性。建立了柴油机工作过程-燃烧室-冷却系统耦合仿真模型,提出试验设计-遗传算法优化算法,该算法具备节省试验成本和多目标全局寻优的优势,选取柴油机的6个典型推进工况点进行研究,采用该算法对冷却系统运行参数开展多目标优化设计,优化设计以海、淡水泵转速为变量因子,以提升动力性参数和经济性参数为目标,以涡前排温、淡水出机温度和峰值缸压为约束条件,优化后,在低负荷点,淡、海水泵节省功耗79.4%、71.73%,扭矩提升7.2%,有效功率提升7.6%,热效率提升8%,耗油率降低6.73%,摩擦功降低9.71%,峰值缸压降低5%。研究结果表明：耦合仿真模型与实机更加贴近;试验设计-遗传算法在解决强耦合、非线性系统的多目标优化问题具备成本低、效率高、精度高的优点。     

Interactive Multi-objective Optimization Design for the Pylon Structure of an Airplane

The pylon structure of an airplane is very complex, and its high-fidelity analysis is quite time-consuming. If posterior preference optimization algorithm is used to solve this problem, the huge time consumption will be unacceptable in engineering practice due to the large amount of evaluation needed for the algorithm. So, a new interactive optimization algorithm-interactive multi-objective particle swarm optimization （IMOPSO） is presented. IMOPSO is efficient, simple and operable. The decision-maker can expediently determine the accurate preference in IMOPSO. IMOPSO is used to perform the pylon structure optimization design of an airplane, and a satisfactory design is achieved after only 12 generations of IMOPSO evolutions. Compared with original design, the maximum displacement of the satisfactory design is reduced, and the mass of the satisfactory design is decreased for 22%.     

信赖域滤子算法在航空发动机在线优化中的应用

主要研究了航空发动机在线优化问题.以非线性发动机部件级模型为优化对象,将信赖域滤子算法应用于航空发动机在线优化,相比基本信赖域算法,该算法由于采用非单调的滤子算法和松弛重置,兼顾了算法在目标函数值下降与可行性保持两方面的品质,通过松弛重置避免子问题的不可行性,滤子算法则保证了算法收敛到全局最小解.最后,基于信赖域滤子算法,以涡扇发动机最小油耗寻优控制为仿真算例,验证了该算法的优越性.