共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
针对150 kN级大涵道比涡扇发动机总体性能参数匹配设计问题,以A340-300飞机对发动机的任务需求为例,采用基于飞/发性能一体化快速迭代优化方法,将飞机/发动机一体化设计与发动机总体性能优化设计进行耦合迭代,对多约束条件下的大涵道比涡扇发动机总体性能方案进行优化设计。结果表明:在保证发动机满足飞机任务需求和任务载荷要求,以及发动机尺寸、质量、污染排放要求等约束条件下,飞机的最大起飞质量较初始方案减轻约14.33%,较A340-300飞机的最大起飞质量减轻约8%~9%;燃油消耗量较初始方案减少约20.6%;在保证发动机与飞机良好匹配性的前提下,通过飞发优化迭代使发动机和飞机的设计难度都有一定程度地降低。采用的研究思路与方法是合理、可行的,具有工程实用价值。 相似文献
3.
4.
《燃气涡轮试验与研究》2013,(6):46-52
建立了飞/发一体化约束分析与任务分析模型,形成了由飞行器指标参数到发动机推力需求的概念设计方法。基于某超声速飞行器的设计指标,开展了飞/发一体化分析,确定了满足任务约束的飞行器总重和发动机推力需求,初步确定了发动机的技术方案,并基于飞/发一体化分析方法,对飞行器的任务轨迹、组合发动机模态转换马赫数和超级燃烧室尺寸进行了优化,可为后续组合发动机总体方案设计提供明确牵引。 相似文献
5.
6.
针对发动机控制规律的选取对飞机/发动机性能一体化设计的影响,基于飞机/发动机性能一体化设计方法,开展了发动机控制规律优化设计方法研究。从先进战斗机飞行任务出发,开展了飞机/发动机性能一体化设计方法研究,进行约束分析和任务分析,以起飞总重最低为目标优选飞机/发动机设计方案,验证了设计方法的合理性。采用飞机/发动机性能一体化设计方法,分别研究了不同节流比和不同控制规律设计对飞机/发动机性能一体化设计的影响。研究表明:在飞机/发动机性能一体化设计过程中,采用合理的发动机最大状态控制规律同时选取恰当的发动机节流比,可以有效扩大约束可行域,同时能够降低发动机的燃油消耗量,降低飞机起飞总重。 相似文献
7.
():飞机与发动机之间用传统的设计方法往往难以得到最优的匹配,为提升飞机与发动机的综合性能,需将二者作为一个整体开展设计.在飞/发—体化设计中,需要重点开展哪些领域的研究工作?存在哪些技术难点?未来的关注点是什么? 相似文献
8.
航空发动机隐身技术分析与论述 总被引:3,自引:0,他引:3
《航空科学技术》2017,(10)
阐述了发动机在红外和雷达隐身的重要意义,同时阐述了发动机多种隐身技术措施,并兼顾考虑发动机推力、重量等代价。指出推动发动机和飞机一体化隐身技术的发展是未来战机隐身能力提升的关键。同时,阐述了不同发动机隐身措施适应不同作战飞机要求的应用情况,在此基础上对后续发动机隐身技术能力提升还存在的技术问题和后续研究重点进行了分析和阐述。 相似文献
9.
为了实现飞机与发动机之间良好的协调与匹配,基于飞/发一体化设计软件AEDsys,通过约束分析、任务分析、参数循环分析、性能循环分析和安装性能分析等环节,对涡扇发动机总体设计进行了系统分析。针对性能循环分析中的备选发动机决策问题,提出了基于多输入多输出约简迭代最小二次支持向量回归机(MRR-LSSVR)的备选发动机代理模型构建方法,用于映射发动机设计参数与性能之间的关系,并通过可行序列二次规划(FSQP)算法自动优化出最佳的发动机设计循环参数组合,克服了AEDsys软件中发动机参数选择环节较为依赖设计经验、效率低的缺陷。 相似文献
10.
结合飞/发一体化设计理念,以提升红外隐身性能为目的,引入横向掺混技术进行尾喷管构型设计。应用计算流体力学(CFD)数值仿真方法,分别分析了圆形喷管和矩形喷管流场温度分布,并提取矩形喷管中心面,研究喷管带小孔壁板偏折角对尾流冷却效果的影响。研究结果表明:相对于入口热流温度,矩形喷口降温率约为30%,尾气流喷出后偏向两侧流动,高温核心区体积快速衰减;圆形喷口降温率约为10%,尾气流喷出后沿轴向一直保持圆柱形,高温核心区体积衰减缓慢。矩形喷口主动冷却效果明显高于圆形喷口,更有利于实现飞/发一体化的热管理及红外隐身。同时,中面带小孔壁板偏折角的大小与主动冷却效果也存在密切关系。 相似文献
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献