试验研究旋流数对燃烧室气动性能的影响

为了深入了解双级轴向旋流器的旋流数变化对模型环形燃烧室内气流结构与气动性能的影响,采用粒子图像速度仪(PIV)对燃烧室内冷态和液雾燃烧流场进行测量,试验研究在冷、热态情况下不同旋流数对模型燃烧室内回流区的尺寸、平均速度(u,v)、脉动速度(U<,rms>,V<,rms>)以及雷诺剪切应力u'v'分布的影响.研究结果表明...     

Numerical simulation of compression corner flows at Mach number 9

A hypersonic vehicle encounters a wide range of conditions during its complete flight regime. These flight conditions may vary from low to high Mach numbers with varying angles of attack. The near-wall viscous dissipation associated with flows at combined high Mach and Reynolds numbers leads to significant wall heat transfer rates and shear stresses. The shock wave/boundary-layer interaction results in a flow separation region, which commonly augments total pressure losses in the flow and lowers the efficiency of aerodynamic control surfaces such as fins installed on a vehicle. The standard turbulence models, when used to resolve such flows, result in incorrect separation bubble size for large separated flows. Therefore, it results in an inaccurate aerodynamic load, such as the wall pressures, skin friction distribution, and heat transfer rate. In previous studies, the application of the shock-unsteadiness correction to the standard two-equation k-ω turbulence model improved the separation bubble size leading to an accurate pressure prediction and shock definition with the assumption of constant Prandtl number. In the present work, the new shock-unsteadiness modification to the k-ω turbulence model is applied to the hypersonic compression corner flows. This new model with variable Prandtl number is based on the model parameter, which depends upon the local density ratio. The computed wall pressures, heat flux and flow field are compared to the experimental data. A parametric study is carried out by varying compression deflection angles, free stream Reynolds number and wall temperatures to compute the flow field and wall data accurately, particularly in the shock boundary layer interaction region. The new shock-unsteadiness modified k-ω model with variable Prandtl number shows an accurate prediction of initial pressure rise location, pressure distribution in the plateau region and heat flux in comparison to the standard k-ω model.     

Evaluation of Turbulence Models in Predicting Hypersonic and Subsonic Base Flows Using Grid Adaptation Techniques

The flows behind the base of a generic rocket, at both hypersonic and subsonic flow conditions, are numerically studied. The main concerns are addressed to the evaluation of turbulence models and the using of grid adaptation techniques. The investiga- tion focuses on two configurations, related to hypersonic and subsonic experiments. The applicability tests of different turbulence models are conducted on the level of two-equation models calculating the steady state solution of the Reynolds-averaged Navier-Stokes(RANS) equations. All used models, the original Wilcox k-ω, the Menter shear-stress transport (SST) and the explicit algebraic Reynolds stress model(EARSM) formulation, predict an asymmetric base flow in both cases caused by the support of the models. A comparison with preliminary experimental results indicates a preference for the SST and EARSM results over the results from the older k-ω model. Sensitivity studies show no significant influence of the grid topology or the location of the laminar to turbulent transition on the base flow field, but a strong influence of even small angles of attack is reported from the related experiments.     

非定常低雷诺数流数值模拟方法研究

低雷诺数翼型流动的一个重要特征是分离泡的产生,并且分离泡通常是非定常的。基于有限体积法,N-S方程和S-A模型的控制方程非耦合求解,时间均采用牛顿型LU-SGS方法推进,无粘项和粘性项用中心差分方法离散计算,在计算非定常流场时,采用伪时间子迭代方法,湍流模型计算时采用在固定点转捩,研究了二维翼型低雷诺数流粘性流动的数值模拟方法,并利用所开发的非定常可压缩粘性流计算方法,数值模拟了在低雷诺数下两种翼型的非定常流动。计算结果表明：气动力系数及分离泡呈规则的周期性变化,证明方法是成功的、可行的。     

Wall-layer models for large-eddy simulations

The numerical simulation of high Reynolds number flows is hampered by model accuracy if the Reynolds-averaged Navier–Stokes (RANS) equations are used, and by computational cost if direct or large-eddy simulations (LES) that resolve the near-wall layer are employed. The cost of a calculation scales like the Reynolds number to the power 3 for direct numerical simulations, or 2.4 for LES, making the resolution of the wall layer at high Reynolds number infeasible even with the most advanced computers. In LES, an attractive alternative to compute high-Re flows is the use of wall-layer models, in which only the outer layer is resolved, while the near-wall region is modeled. Three broad classes of approaches are presently used: bypassing this region altogether using wall functions, solving a separate set of equations in the near-wall region, weakly coupled to the outer flow, or simulating the near-wall region in a global, Reynolds-averaged, sense. These approaches are discussed and their ranges of applicability are highlighted. Various unresolved issues in wall-layer modeling are presented.     

壁面湍流模型对湍流分离流动数值模拟的影响

本文用三种近壁湍流模型计算了二个二维的湍流分离流动：单包流动和多包流动。结果表明：二层模型和低Reynolds数模型具有类似的特性。它们基本上给出合理的分离流动结构。壁函数的方法由于对数律的假定基本上不适合于计算湍流的分离流动。     

Numerical simulations of shock/boundary layer interactions using time-dependent modeling techniques: A survey of recent results

Supersonic or hypersonic flows within and around flight vehicles inevitably involve interactions of strong shock waves with boundary layers. Flows within inlet/isolator configurations, and flows induced by control surface deflections are some examples. Such interactions are time dependent in nature and are often subject to low-frequency, large-scale motion that induces local pressure and heating loads. With recent increases in available computer power, it has now become possible to simulate such interactions at experimentally relevant Reynolds numbers using time-dependent techniques, such as direct numerical simulation (DNS), large-eddy simulation (LES), and hybrid large-eddy simulation/Reynolds-averaged Navier–Stokes (LES–RANS) methods. This paper will survey some recent work in this area and will describe insights in shock/boundary layer interaction physics gained by using these high-fidelity methods. Attention will be focused on studies that compare directly with experimental data at the same (or nearly the same) Reynolds number. Challenges in the application of these techniques to even more complicated high-speed flow fields are also outlined.     

Improvement of Baldwin-Lomax turbulence model for supersonic complex flows

Entropy represents the dissipation rate of energy. Through direct numerical simulation (DNS) of supersonic compression ramp flow, we find the value of entropy is monotonously decreasing along the wall-normal direction no matter in the attached or the separated region. Based on this feature, a new version of Baldwin-Lomax turbulence model (BL-entropy) is proposed in this paper. The supersonic compression ramp and cavity-ramp flows in which the original Baldwin-Lomax model fails to get convergent solutions are chosen to evaluate the performance of this model. Results from one-equation Spalart-Allmaras model (SA) and two-equation Wilcox k-x model are also included to compare with available experimental and DNS data. It is shown that BLentropy could conquer the essential deficiency of the original version by providing a more physically meaningful length scale in the complex flows. Moreover, this method is simple, computationally efficient and general, making it applicable to other models related with the supersonic boundary layer.     

Robust and efficient computation of turbulent flows around civil transport aircraft at flight Reynolds numbers

This work aims at providing numerical methods that enable the robust and efficient simulation of turbulent flows around civil transport aircraft configurations at flight Reynolds numbers. Robustness problems related to the multigrid treatment of advanced transport equation turbulence models have been identified preventing convergence of simulations at high or flight Reynolds numbers. Therefore the application of multigrid to the turbulence equations is omitted while the multigrid treatment of the mean flow equations stays unchanged. Moreover, a fully implicit time integration scheme – a DDADI approach – is applied to the turbulence equations. The new approach raised robustness to a sufficient level to converge viscous computations at flight Reynolds numbers. Furthermore, the convergence speed of aerodynamic coefficients for three dimensional applications has also been improved significantly.     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

槽流的亚临界转捩与局地湍流

在中低雷诺数时,处于线性稳定的槽道流若受到强扰动可发生亚临界转捩变为湍流。近年人们对该类转捩机理的研究取得重要进展。对于平板泊肃叶流,亚临界转捩之初是稀疏湍流态,其特征结构是远间隔的包含小尺度涡和高低速条带的大尺度的湍流带,可倾斜伸长。该阶段的湍流占比有上限但并非雷诺数的单值函数。随着雷诺数的增加转捩进入平衡局地湍流态,即存在统计定常态,其湍流占比是雷诺数单值函数,可由定向逾渗模型描述。进一步增加雷诺数,湍流带的分裂愈发频繁,最终流场会布满湍流带,在更高的雷诺数时变为均匀湍流。论文概述了为比拟亚临界转捩过程所提出的动力学模型,以及为定量表征管流、平板库艾特流和平板泊肃叶流转捩过程的相似性所提出的局地稳定性参数,并在最后对槽道流亚临界转捩研究的发展做了简要展望。     

二维超声速横侧喷流湍流数值模拟

采用AUSM -up格式模拟了二维超声速横侧喷流干扰流场.比较了SA、SST和EASM湍流模型对分离流动的模拟精度.通过调节喷流出口压力,研究了喷流参数对分离区大小、物面压力分布以及喷流喷射高度的影响.同实验对比发现:SST和EASM湍流模型在低压力比下能够比较准确模拟分离区,但是在高压力比下,湍流模型对分离区的模拟精度较差.     

高雷诺数下的翼型绕流LBM数值模拟

采用格子Boltzmann方法(LBM)的二维9速度(D2Q9)模型和贴体网格,通过引入非均匀网格插值方法和非平衡态外推边界处理,分别结合Baldwin-Lomax(B-L)湍流模型和Spalart-Allmaras(S-A)湍流模型,对高雷诺数Re≥5×105下的NACA0012翼型绕流进行了数值模拟和对比研究,两者的结果与CFL3D的结果和实验结果均吻合的很好,相比之下,采用S-A模型能更好地预测失速迎角,其处理分离流动的能力要强于B-L模型。改进后的LBM适用于非均匀贴体网格,曲边边界,计算简单,并可应用于更复杂的高雷诺数流动中。     

SST湍流模型在高超声速绕流中的改进

为模拟高超声速湍流问题,对剪切应力输运(SST)湍流模型系数进行了修正。数值格式采用改进的总变差递减(TVD)格式,并对湍流模型的负值强制项进行了隐式处理。在此基础上计算了绕平板以及具有分离、再附、激波/边界层干扰等复杂流动结构的压缩拐角的高超声速流动。计算结果与试验数据及半经验公式的对比表明:SST湍流模型引入的雷诺剪切应力与湍动能之比为常数(Bradshaw数)在高超声速绕流中并不成立。Bradshaw数修正后的SST湍流模型与原模型相比,所计算的壁面压力、摩擦阻力和壁面热流分布更接近试验结果。     

NPLS技术及其在高速飞行器气动研究中的应用

近年来,与高速飞行器相关的超声速/高超声速流动受到了极大关注。这类流动所具有的非定常性、强梯度和可压缩性对试验研究提出了挑战。纳米示踪的平面激光散射技术（NPLS）是2005年由作者所在的研究团队研发的非接触光学测试技术。它能够获得超声速三维流场的某个剖面的瞬态流动结构,并且具有较高的时空分辨率。目前,许多研究结果表明NPLS是研究超声速湍流的一项非常有效的技术。近年来,作者应用 NPLS 技术在超声速湍流研究中取得了较大的进展,并且基于NPLS开发了其它几种技术,比如基于 NPLS 的密度场测量技术（NPLS-DT）,能够获得超声速流动的密度场信息并还能进一步得到雷诺应力分布。本文介绍了NPLS技术并回顾了其在超声速边界层、激波/边界层相互作用等流动中的应用。由于能够获得雷诺压力和湍动能等统计量, NPLS技术有望在发展可压缩湍流模型的研究中发挥作用。     

微分雷诺应力模型在激波分离流中的应用

由于Boussinesq涡粘性假设的湍流模型在一些流动中如激波分离流中预测失真,本文介绍一种基于完全雷诺应力方程的微分雷诺应力模型(DRSM),应用压缩性修正和改进耗散率方程构造出应用于可压流体的可实现DRSM,SSG压应力模型测试了两组参数。将其应用于ONERA M6机翼在跨声速大攻角的计算,结果表明DRSM能更好地模拟激波位置和流动分离。     

模型的转捩流动计算分析简

 为了在黏性流动数值模拟中实现边界层转捩的自动预测,将γ-Re_θt转捩模型引入到三维非结构混合网格的雷诺平均Navier-Stokes方程求解程序（HUNS3D）。该转捩模型由两个依赖当地变量定义的关于间歇因子和当地化转捩起始动量厚度雷诺数的输运方程组成,其数值求解算法与流场求解程序中湍流模型的求解方法相同。为了考察和验证HUNS3D程序中γ-Re_θt转捩模型对航空工程中的常见附面层自由转捩问题的预测精度,对低速平板流动、Aerospatial-A翼型、NLR 7301超临界翼型和NASA Trap wing 高升力构型等典型外形的自由转捩流动进行了计算,并将计算结果与相关试验结果进行了对比分析。算例结果表明：γ-Re_θt转捩模型对于转捩位置具有很好的敏感性,能比较准确地预测自然转捩和分离转捩,可以有效提高HUNS3D程序对实际流动的模拟能力和预测精度。     

激光空间流动显示及其应用

本文介绍激光空间流动显示技术及其在复杂流动中的应用。着重介绍了作者在激光诱导荧光流动显示(LIF)技术的研究和应用。较系统地讨论了若干原理和技术问题,并提供了一些实际应用的典型的流态照片。     

三棱柱的低雷诺数绕流研究

数值模拟了截面为等腰三角形的棱柱在不可压牛顿流体中的二维绕流问题,分析了不同的截面尺度比以及三角形顶点迎风和背风安置时的尾流稳定性与阻力系数.研究发现对于较大截面尺度比的棱柱,在相同雷诺数的情况下顶点迎风相较于顶点背风的情况更易失稳从而产生侧向力,但阻力系数相对较小,当雷诺数为160时,最多能够减少19.4%.进一步地对比研究了顶点迎风与顶点背风在不同截面尺度比时升、阻力系数及涡脱落频率随雷诺数的变化关系.