Target tracking using infrared measurements and laser illumination

A missile target tracker is designed using a filter/correlator (with adaptive target shape identification) based on forward-looking infrared (FLIR) sensor measurements to track the center-of-intensity of the hardbody/plume combination, and another filter using Doppler and/or speckle information in the return from a low-power laser illuminator to estimate the offset between the intensity centroid and the hardbody center-of-mass. The Doppler information is shown to yield smaller bias and error variance from the tracker than the speckle information. Performance of trackers based on just Doppler or both Doppler and speckle information from the laser return is portrayed as a function of important parameters in the tracking environment     

Track labeling and PHD filter for multitarget tracking

Multiple target tracking requires data association that operates in conjunction with filtering. When multiple targets are closely spaced, the conventional approaches (as, e.g., MHT/assignment) may not give satisfactory results. This is mainly because of the difficulty in deciding what the number of targets is. Recently, the probability hypothesis density (PHD) filter has been proposed and particle filtering techniques have been developed to implement the PHD filter. In the particle PHD filter, the track labeling problem is not considered, i.e., the PHD is obtained only for a frame at a time, and it is very difficult to perform the multipeak extraction, particularly in high clutter environments. A track labeling method combined with the PHD approach, as well as considering the finite resolution, is proposed here for multitarget tracking, i.e., we keep a separate tracker for each target, use the PHD in the resolution cell to get the estimated number and locations of the targets at each time step, and then perform the track labeling ("peak-to-track" association), whose results can provide information for PHD peak extraction at the next time step. Besides, by keeping a separate tracker for each target, our approach provides more information than the standard particle PHD filter. For example, in group target tracking, if we are interested in the motion of a specific target, we can track this target, which is not possible for the standard particle PHD filter, since the standard particle PHD filter does not keep track labels. Using our approach, multitarget tracking can be performed with automatic track initiation, maintenance, spawning, merging, and termination     

Multiple scan joint probabilistic data association

This paper presents a multiple scan or n-scan-back joint probabilistic data association (JPDA) algorithm which addresses the problem of measurement-to-track data association in a multiple target and clutter environment. The standard single scan JPDA algorithm updates a track with weighted sum of the measurements which could have reasonably originated from the target in track. The only information the standard JPDA algorithm uses is the measurements on the present scan and the state vectors and covariance matrices of the present targets. The n-scan-back algorithm presented here uses multiple scans of measurements along with the present target information to produce better weights for data association. The standard JPDA algorithm can utilize a formidable amount of processing power and the n-scan-back version only worsens the problem. Therefore, along with the algorithm presentation, implementations which make this algorithm practical are discussed and referenced. An example is also shown for a few n-scan-back window lengths     

An Adaptive Two-Dimensional Kalman Tracking Filter

A continuously adaptive two-dimensional Kalman tracking filter for a low data rate track-while-scan (TWS) operation is introduced which enhances the tracking of maneuvering targets. The track residuals in each coordinate, which are a measure of track quality, are sensed, normalized to unity variance, and then filtered in a single-pole filter. The magnitude Z of the output of this single-pole filter, when it exceeds a threshold Z1 is used to vary the maneuver noise spectral density q in the Kalman filter model in a continuous manner. This has the effect of increasing the tracking filter gains and containing the bias developed by the tracker due to the maneuvering target. The probability of maintaining track, with reasonably sized target gates, is thus increased, The operational characteristic of q versus Z assures that the tracker gains do not change unless there is high confidence that a maneuver is in progress.     

Clutter map information for data association and track initialization

This paper considers the problem of forming and maintaining tracks when measurements have both uncertain origin and are corrupted by additive sensor noise. The spatial clutter measurement density is assumed nonhomogeneous and known. The PPDA-MAP algorithm provides a set of recursive formulae for data association and probability of target existence, thus enabling automatic track initiation, track maintenance, and track termination. New values for initial probability of target existence for IPDA-type algorithm are also derived. Simulation results compare the performance of IPDA-MAP with IPDA, IMM-PDA, IMM-PDA-MAP, EB-PDA and EB-PDA-MAP in a heavy and nonuniform clutter situation.     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.     

Clutter Rejection using Peak Curvature

A typical tracking algorithm takes its input from a peak detector or plot extractor. This process reduces the sensor image data to point measurements and reduces the volume of data that the tracker must process. However, useful information can be lost. This paper shows how the clutter of a peak can be a useful feature for discriminating false alarms and valid detections. The benefit obtained by using this feature is quantified through false track rate on recorded sensor data. On recorded data with difficult clutter conditions, approximately sixty percent of false tracks are rejected by exploiting peak curvature     

Track monitoring when tracking with multiple 2D passive sensors

A fast method of track monitoring is presented which determines what tracks are good and what tracks have had data association problems and should be eliminated. The philosophy of tracking in a dense target environment with limited central processing unit (CPU) time is to acquire the targets, track them with as simple a filter as will meet requirements, and monitor the tracks to determine if they are still tracking a target or are tracking incorrect returns and should be terminated. After termination the true targets are reacquired. However, it is difficult to determine from simple track monitoring the correct interpretation of a poor track. Poor tracks can be a result of a sensor failure, target maneuver, or incorrect data association. The author describes track monitoring and provides a solution to this dilemma when tracking with multiple two-dimensional passive sensors. The method is much faster than other monitoring methods.<>     

Velocity Estimation from Position Outputs of a Three-Dimensional Radar

Kalman filtering equations to obtain estimates of velocity from radar position information are defined. In a track-while-scan operation, a three-dimensional radar sensor measures range, bearing, and elevation (r, ?, ?) of an airborne target at uniform sampling intervals of time T. The noisy position measurements are converted to x, y, z coordinates and put through a Kalman filter to obtain x, y, z velocity components. The filtering equations together with steady-state error estimates are given.     

A multi-rate sensor fusion approach using information filters for estimating aero-engine performance degradation

Gas-path performance estimation plays an important role in aero-engine health management, and Kalman Filter(KF) is a well-known technique to estimate performance degradation. In previous studies, it is assumed that different kinds of sensors are with the same sampling rate, and they are used for state estimation by the KF simultaneously. However, it is hard to achieve state estimation using various kinds of sensor measurements at the same sampling rate due to a complex network and physical characteristic differences between sensors, especially in an advanced multisensor architecture. For this purpose, a multi-rate sensor fusion using the information filtering approach is proposed based on the square-root cubature rule, which is called Multi-rate Squareroot Cubature Information Filter(MSCIF) to track engine performance degradation. Soft measurement synchronization of the MSCIF is designed to provide a sensor fusion condition for multiple sampling rates of measurement, and a fault sensor is isolated by maximum likelihood validation before state estimation. The contribution of this paper is to supply a novel multi-rate informationfilter approach for sensor fault tolerant health estimation of an aero-engine in a multi-sensor system. Tests are conducted for aero-engine performance degradation estimation with multiple sampling rates of sensor measurement on both digital simulation and semi-physical experiment.Experimental results illustrate the superiority of the proposed algorithm in terms of degradation estimation accuracy and robustness to sensor failure in a multi-sensor system.     

Bayesian and Dempster-Shafer target identification for radarsurveillance

This paper considers the problem of target track identification in a radar surveillance system. To build a target identifier alongside a tracker, four features which are available for real-time processing in an air surveillance system are used here: target identity (TID) from a friend-and-foe identification (IFF) system, elevation measurement from the radar, target speed, and acceleration estimated by a tracker. These four features are combined to classify air targets into five different air target categories: friendly commercial, friendly military, hostile commercial (or unknown airline), hostile military, and false targets (clutter). Two popular statistic-based techniques, namely, the Bayesian and Dempster-Shafer methods, are applied to develop radar target identification algorithms for our application. Real-life as well as simulated air surveillance radar data are used to evaluate the practicality and effectiveness of this track identification approach in a radar surveillance system     

Tracking with distributed sets of proximity sensors using geometric invariants

We propose a new approach to forming an estimate of a target track in a distributed sensor system using very limited sensor information. This approach uses a central fusion system that collects only the peak energy information from each sensor and assumes that the energy attenuates as a power law in range from the source. A geometrical invariance property of the proximity of the distributed sensors relative to a target track is used to generate potential target track paths. Numerical simulation examples are presented to illustrate the practicality of the technique.     

Multisensor covariance control strategies for reducing bias effects in interacting target scenarios

Algorithms are presented for managing sensor information to reduce the effects of bias when tracking interacting targets. When targets are close enough together that their measurement validation gates overlap, the measurement from one target can be confused with another. Data association algorithms such as the joint probabilistic data association (JPDA) algorithm can effectively continue to track targets under these conditions, but the target estimates may become biased. A modification of the covariance control approach for sensor management can reduce this effect. Sensors are chosen based on their ability to reduce the extent of measurement gate overlap as judged by a set of heuristic parameters derived in this work. Monte Carlo simulation results show that these are effective methods of reducing target estimate bias in the JPDA algorithm when targets are close together. An analysis of the computational demands of these algorithms shows that while they are computationally demanding, they are not prohibitively so.     

Tracker design based on target perceivability

Theoretical design of a tracker with respect to the so-called target perceivability is presented. Basic rules and analytic formulas for the determination of tracker parameters are presented for making better tracking decisions (i.e., track initiation, confirmation, and termination) toward enhancing tracking performance. Simulation results are provided that support the theoretical design and demonstrate the enhancement of the tracker in tracking performance     

Evaluating a multiple-hypothesis multitarget tracking algorithm

The performance evaluation of multiple-hypothesis, multitarget tracking algorithm is presented. We are primarily interested in target-detection/track-initiation capabilities as measures of performance. Through Monte Carlo simulations, a multiple-hypothesis tracking algorithm was evaluated in terms of 1) probability of establishing a track from target returns and 2) false track density. A radar was chosen as the sensor, and a general multiple-hypothesis, multitarget tracking algorithm was used in the Monte Carlo simulations. The simulation results predict the probability of establishing a track from returns of a target as well as the false track density per scan volume per unit time. The effects of the target radar cross section and the radar power, measured through the mean signal-to-noise ratio (SNR) were studied, as were the effects of detection threshold and track quality threshold. Computational requirements were also investigated     

Adaptive Phased-Array Tracking in ECM using Negative Information

Target tracking with adaptive phased-array radars in the presence of standoff jamming presents both challenges and opportunities to the track filter designer. A measurement likelihood function is derived for this situation which accounts for the effect of both positive and negative contact information. This likelihood function is approximated a? a weighted sum of Gaussian terms consisting of both positive and negative weights, accounting for the positive and negative contact information. Additionally, recent theoretical results have been reported which have derived an accurate measurement error covariance in the vicinity of the jammer when adaptive beamforming is used by the radar to null the effects of the jammer. We compare the impact of using a likelihood function that accounts for negative contact information and the corrected measurement error covariance by comparing five Kalman filter-based trackers in five different scenarios. We show that only those track filters which use both the negative contact information and the corrected measurement error covariance are effective in maintaining track on a maneuvering target as it passes through the jamming region. This approach can also be generalized to any target tracking problem where the sensor response is anisotropic.     

IMMPDAF for radar management and tracking benchmark with ECM

A framework is presented for controlling a phased array radar for tracking highly maneuvering targets in the presence of false alarms (FAs) and electronic countermeasures (ECMs). Algorithms are presented for track formation and maintenance; adaptive selection of target revisit interval, waveform and detection threshold; and neutralizing techniques for ECM, namely, against a standoff jammer (SOJ) and range gate pull off (RGPO). The interacting multiple model (IMM) estimator in combination with the probabilistic data association (PDA) technique is used for tracking. A constant false alarm rate (CFAR) approach is used to adaptively select the detection threshold and radar waveform, countering the effect of jammer-induced false measurements. The revisit interval is selected adaptively, based on the predicted angular innovation standard deviations. This tracker/radar-resource-allocator provides a complete solution to the benchmark problem for target tracking and radar control. Simulation results show an average sampling interval of about 2.5 s while maintaining a track loss less than the maximum allowed 4%     

基于SVM算法的虚假航迹识别

针对云雨杂波和主被动干扰导致多雷达传感器产生虚假目标航迹的问题,利用支持向量机(SVM)算法的自主学习能力,通过构建基于数据驱动的判别模型进行虚假航迹识别。针对航迹起始得到的目标潜在航迹,利用人工智能数据驱动、自学习的特点,设计了SVM算法。通过对已标记真假的目标航迹样本进行离线学习,形成虚假航迹识别的SVM分类器,实现了基于数据驱动的判别模型代替先验知识规则约束的固定模型,并在工程应用中,利用SVM分类器在线识别虚假航迹,完成实时剔除。通过实测雷达数据实验验证,该算法的目标虚假航迹准确率高达95%以上,完全满足实际的工程应用需求。相比基于阈值或规则进行硬性判断的传统虚假航迹识别方法,所提出的算法不仅提高了准确率,还具有较高的实时性,能够适应复杂多变的杂波环境,在实际应用中具有更强的适应性和实用性。因此,提出的基于SVM算法的虚假航迹识别方法对于密集杂波场景下的虚假航迹剔除问题具有显著的实际应用价值。     

基于模糊贝叶斯网的空战传感器资源管理方法

空战中目标状态信息的不确定性、目标与我机相对态势是影响机载传感器资源分配问题的重要影响因素.针对此问题,提出一种基于模糊贝叶斯网(FBN)的空战传感器资源管理方法,以空战传感器资源管理中涉及的影响因素因果关系作为建网依据,将目标信息增量、目标威胁、飞行员指令作为证据变量驱动网络进行概率推理,从而获取空战传感器资源的分配结果.仿真结果表明,与传统方法相比,方法的自适应变间隔采样策略能够根据目标威胁及飞行员指令影响,管理空战态势不同阶段的传感器资源以满足空战作战任务需求.