A class of near optimal JPDA algorithms

The crucial problem in multiple target tracking is the hit-to-track data association. A hit is a received signal from a target or background clutter which provides positional information If an incorrect hit is associated with a track, that track could diverge and prematurely terminate or cause other tracks to also diverge. Most methods for hit-to-track data association fall into two categories: multiple hypothesis tracking (MHT) and joint probabilistic data association (JPDA). Versions of MHT use all or some reasonable hits to update a track and delay the decision on which hit was correct. JPDA uses a weighted sum of the reasonable hits to update a track. These weights are the probability that the hit originated from the target in track. The computational load for the joint probabilities increases exponentially as the number of targets increases and therefore, is not an attractive algorithm when expecting to track many targets. Reviewed here is the JPDA filter and two simple approximations of the joint probabilities which increase linearly in computational load as the number of targets increase. Then a new class of near optimal JPDA algorithms is introduced which run in polynomial time. The power of the polynomial is an input to the algorithm. This algorithm bridges the gap in computational load and accuracy between the very fast simple approximations and the efficient optimal algorithms     

Tracking in Clutter using IMM-IPDA?Based Algorithms

We describe three single-scan probabilistic data association (PDA) based algorithms for tracking manoeuvering targets in clutter. These algorithms are derived by integrating the interacting multiple model (IMM) estimation algorithm with the PDA approximation. Each IMM model a posteriori state estimate probability density function (pdf) is approximated by a single Gaussian pdf. Each algorithm recursively updates the probability of target existence, in the manner of integrated PDA (IPDA). The probability of target existence is a track quality measure, which can be used for false track discrimination. The first algorithm presented, IMM-IPDA, is a single target tracking algorithm. Two multitarget tracking algorithms are also presented. The IMM-JIPDA algorithm calculates a posteriori probabilities of all measurement to track allocations, in the manner of the joint IPDA (JIPDA). The number of measurement to track allocations grows exponentially with the number of shared measurements and the number of tracks which share the measurements. Therefore, IMM-JIPDA can only be used in situations with a small number of crossing targets and low clutter measurement density. The linear multitarget IMM-IPDA (IMM-LMIPDA) is also a multitarget tracking algorithm, which achieves the multitarget capabilities by integrating linear multitarget (LM) method with IMM-IPDA. When updating one track using the LM method, the other tracks modulate the clutter measurement density and are subsequently ignored. In this fashion, LM achieves multitarget capabilities using the number of operations which are linear in the: number of measurements and the number of tracks, and can be used in complex scenarios, with dense clutter and a large number of targets.     

Sequential track extraction

Sensors like radar or sonar usually produce data on the basis of a single frame of observation: target detections. The detection performance is described by quantities like detection probability Pd and false alarm density f. A different task of detection is formation of tracks of targets unknown in number from data of multiple consecutive frames of observation. This leads to quantities which are of a higher level of abstraction: extracted tracks. This again is a detection process. Under benign conditions (high Pd, low f and well separated targets) conventional methods of track initiation are recommended to solve a simple task. However, under hard conditions the process of track extraction is known to be difficult. We here concentrate on the case of well separated targets and derive an optimal combinatorial method which can be used under hard operating conditions. The method relates to MHT (multiple hypothesis tracking), uses a sequential likelihood ratio test and derives benefit from processing signal strength information. The performance of the track extraction method is described by parameters such as detection probability and false detection rate on track level, while Pd and f are input parameters which relate to the signal-to-noise interference ratio (SNIR), the clutter density, and the threshold set for target detection. In particular the average test lengths are analyzed parametrically as they are relevant for a user to estimate the time delay for track formation under hard conditions     

Suboptimal joint probabilistic data association

A significant problem in multiple target tracking is the hit-to-track data association. A hit is a received signal from a target or background clutter which provides positional information. If an incorrect hit is associated with a track, that track could diverge and terminate. Prior methods for this data association problem include various optimal and suboptimal two-dimensional assignment algorithms which make hit-to-track associations. Another method is to assign a weight for the reasonable hits and use a weighted centroid of those hits to update the track. The method of weighting the hits is known as joint probabilistic data association (JPDA). The authors review the JPDA approach and a simple ad hoc approximation and then introduce a new suboptimal JPDA algorithm. Examples which compare an optimal two-dimensional assignment algorithm with the ad hoc and the new suboptimal JPDA formulation are given     

Track labeling and PHD filter for multitarget tracking

Multiple target tracking requires data association that operates in conjunction with filtering. When multiple targets are closely spaced, the conventional approaches (as, e.g., MHT/assignment) may not give satisfactory results. This is mainly because of the difficulty in deciding what the number of targets is. Recently, the probability hypothesis density (PHD) filter has been proposed and particle filtering techniques have been developed to implement the PHD filter. In the particle PHD filter, the track labeling problem is not considered, i.e., the PHD is obtained only for a frame at a time, and it is very difficult to perform the multipeak extraction, particularly in high clutter environments. A track labeling method combined with the PHD approach, as well as considering the finite resolution, is proposed here for multitarget tracking, i.e., we keep a separate tracker for each target, use the PHD in the resolution cell to get the estimated number and locations of the targets at each time step, and then perform the track labeling ("peak-to-track" association), whose results can provide information for PHD peak extraction at the next time step. Besides, by keeping a separate tracker for each target, our approach provides more information than the standard particle PHD filter. For example, in group target tracking, if we are interested in the motion of a specific target, we can track this target, which is not possible for the standard particle PHD filter, since the standard particle PHD filter does not keep track labels. Using our approach, multitarget tracking can be performed with automatic track initiation, maintenance, spawning, merging, and termination     

Tracking with classification-aided multiframe data association

In most conventional tracking systems, only the target kinematic information from, for example, a radar or sonar or an electro-optical sensor, is used in measurement-to-track association. Target class information, which is typically used in postprocessing, can also be used to improve data association to give better tracking accuracy. The use of target class information in data association can improve discrimination by yielding purer tracks and preserving their continuity. In this paper, we present the simultaneous use of target classification information and target kinematic information for target tracking. The approach presented integrates target class information into the data association process using the 2-D (one track list and one measurement list) as well as multiframe (one track list and multiple measurement lists) assignments. The multiframe association likelihood is developed to include the classification results based on the "confusion matrix" that specifies the accuracy of the target classifier. The objective is to improve association results using class information when the kinematic likelihoods are similar for different targets, i.e., there is ambiguity in using kinematic information alone. Performance comparisons with and without the use of class information in data association are presented on a ground target tracking problem. Simulation results quantify the benefits of classification-aided data association for improved target tracking, especially in the presence of association uncertainty in the kinematic measurements. Also, the benefit of 5-D (or multiframe) association versus 2-D association is investigated for different quality classifiers. The main contribution of this paper is the development of the methodology to incorporate exactly the classification information into multidimensional (multiframe) association.     

基于序贯关联算法的多目标无源跟踪

基于序贯关联算法,对多目标无源跟踪问题进行了研究。在只有角度信息可以利用的情况下,首先,利用波门技术对各个无源传感器角度测量数据进行关联和滤波,形成参数航迹;然后,将各个无源传感器的参数航迹送到融合中心进行关联配对,并在关联过程中通过构造关联质量函数对参数航迹的关联历史情况进行度量,解决参数航迹关联模糊问题;最后,通过对关联成功的参数航迹进行交叉定位,给出多个不同目标的位置信息,实现分布式无源系统对多目标的数据关联和跟踪,并通过仿真分析,对算法的有效性和可行性进行验证。     

Directed Subspace Search ML-PDA with Application to Active Sonar Tracking

The maximum likelihood probabilistic data association (ML-PDA) tracking algorithm is effective in tracking Very Low Observable targets (i.e., very low signal-to-noise ratio (SNR) targets in a high false alarm environment). However, the computational complexity associated with obtaining the track estimate in many cases has precluded its use in real-time scenarios. Previous ML-PDA implementations used a multi-pass grid (MPG) search to find the track estimate. Two alternate methods for finding the track estimate are presented-a genetic search and a newly developed directed subspace (DSS) search algorithm. Each algorithm is tested using active sonar scenarios in which an autonomous underwater vehicle searches for and tracks a target. Within each scenario, the problem parameters are varied to illustrate the relative performance of each search technique. Both the DSS search and the genetic algorithm are shown to be an order of magnitude more computationally efficient than the MPG search, making possible real-time implementation. In addition, the DSS search is shown to be the most effective technique at tracking a target at the lowest SNR levels-reliable tracking down to 5 dB (postprocessing SNR in a resolution cell) using a 5-frame sliding window is demonstrated, this being 6 dB better than the MPG search.     

Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.     

Association of tracks from over the horizon radar

In Over-The-Horizon Radar (OTHR), multiple ionospheric layers cause several tracks per target to be observed. This effect causes ambiguities in target identification and track coordinate registration. A pattern classification approach is proposed for associating tracks. Neural networks and statistical methods are applied to combine track affinities and associate pairs of tracks. The proposed approach provides a practical and efficient way of dealing with multiple track association when the number of targets is large and optimal. Bayesian hypothesis testing is not practical     

基于区实混合序列相似度的异步不等速率航迹关联算法

在分布式多目标跟踪系统中,由于局部传感器开机时间、采样频率以及通信延迟不同等原因,导致来自各传感器的局部航迹往往是异步不等速率的。目前一般的方法是先进行时域配准再进行航迹关联,但是在同步化的过程中,航迹估计值的误差会发生传播,影响航迹关联的性能。针对此问题,提出了一种基于区实混合序列相似度的异步不等速率航迹关联算法。算法首先通过区间数-实数混合序列变换(IRST)得到等长度的航迹行为序列,然后定义一种新的序列差异信息度量,得到混合序列的相似度,以此进行航迹关联判定。仿真实验表明,该算法可以有效地解决异步不等速率航迹关联问题,并且通信延迟和数据乱序对算法性能的影响不明显。     

Bayesian tracking of two possibly unresolved maneuvering targets

The paper studies the problem of maintaining tracks of two targets that may maneuver in and out formation flight, whereas the sensor and measurement extraction chain produces false and possibly unresolved or missing measurements. If the possibility of unresolved measurements is not modelled then it is quite likely that either the two tracks coalesce or that one of the two tracks diverges on false measurements. In literature a robust measurement resolution model has been incorporated within an interacting multiple model/multiple hypothesis tracking (IMM/MHT) track maintenance setting. A straightforward incorporation of the same model within an IMM and probabilistic data association (PDA)-like hypothesis merging approach suffers from track coalescence. In order to improve this situation, the paper develops a track-coalescence avoiding hypotheses merging version for the two target problem considered. Through Monte Carlo simulations, the novel filters are compared with applying hypotheses merging approaches that ignore the possibility of unresolved measurements or track-coalescence.     

Effectiveness of track monitoring with multiple 2D passive sensors

An analytical technique is presented which can be used to evaluate the effectiveness of the track monitoring scheme presented by J.A. Roecker (see ibid., vol.27, no.6, p.872-6, Nov. 1991) in detecting false track-to-track (ghost track) assignments without the use of simulations. It is shown that when two tracks are traveling in parallel and in the direction of the inclination angle, it is impossible to determine which tracks to associate. However, track monitoring is effective under all other circumstances. A tracking algorithm designer can use this technique to determine the length of time before track-to-track initiation for good ghost track rejection. This technique also determines the probability of accepting ghost tracks during mature track monitoring.<>     

Joint integrated probabilistic data association: JIPDA

A new recursive filter for multi-target tracking in clutter is presented. Multiple tracks may share the same measurement(s). Joint events are formed by creating all possible combinations of track-measurement assignments and the probabilities for these joint events are calculated. The expressions for the joint event probabilities incorporate the probabilities of target existence of individual tracks, an efficient approximation for the cluster volume and a priori probability of the number of clutter measurements in each cluster. From these probabilities the data association and target existence probabilities of individual tracks are obtained, which allows track state update and false track discrimination. A simulation study is presented to show the effectiveness of this approach.     

Track Biases and Coalescence with Probabilistic Data Association

It is shown that probabilistic data association yields biased tracks in a multitarget environment, and the magnitude of the bias is investigated. A critical target separation distance exists, within which the tracks tend to coalesce completely. The problem of track initiation on new targets is also discussed.     

New assignment-based data association for tracking move-stop-move targets

We present a new assignment-based algorithm for data association in tracking ground targets employing evasive move-stop-move maneuvers using ground moving target indicator (GMTI) reports obtained from an airborne sensor. To avoid detection by the GMTI sensor, the targets deliberately stop for some time before moving again. The sensor does not detect a target when the latter's radial velocity (along the line-of-sight from the sensor) falls below a certain minimum detectable velocity (MDV). Even in the absence of move-stop-move maneuvers, the detection has a less-than-unity probability (P/sub D/<1) due to obscuration and thresholding. Then, it is of interest, when a target is not detected, to develop a systematic technique that can distinguish between lack of detection due to P/sub D/<1 and lack of detection due to a stop (or a near stop). Previously, this problem was solved using a variable structure interacting multiple model (VS-IMM) estimator with a stopped target model (VS-IMM-ST) without explicitly addressing data association. We develop a novel "two-dummy" assignment approach for move-stop-move targets that considers both the problem of data association as well as filtering. Typically, in assignment-based data association a "dummy" measurement is used to denote the nondetection event. The use of the standard single-dummy assignment, which does not handle move-stop-move motion explicitly, can result in broken tracks. The new algorithm proposed here handles the evasive move-stop-move motion by introducing a second dummy measurement to represent nondetection due to the MDV. We also present a likelihood-ratio-based track deletion scheme for move-stop-move targets. Using this two-dummy data association algorithm, the track corresponding to a move-stop-move target is kept "alive' during missed detections both due to MDV and due to P/sub D/<1. In addition, one can obtain reductions in both rms estimation errors as well as the total number of track breakages.     

海上目标雷达与 AIS航迹时空匹配方法

针对海上目标的雷达与船舶自动识别系统(Automatic Identification System,AIS)中,航迹之间存在的时空不匹配现象,提出了在空间对准之后结合海上航迹运动特点,对 AIS航迹数据进行插值对准雷达目标航迹的方法,在解决雷达与 AIS航迹之间时空不匹配问题的同时,最大程度减小插值误差。该方法根据船舶航向变化率,结合航速航向法和内插外推法的优势,针对不同航迹特点自动选择最佳的插值配准方法,实现海上目标的雷达与 AIS航迹点的自动插值和时空对齐。仿真实验结果表明,所提方法针对海上目标复杂运动,可以自动匹配选择最佳插值方法,有效降低误差,实现雷达与 AIS航迹之间的时空匹配。     

基于傅里叶变换的航迹对准关联算法

研究了在组网雷达存在系统误差情况下的目标航迹关联问题,理论分析了雷达系统误差对目标航迹的影响,并将该影响表示为目标航迹的旋转和平移量。在此基础上,提出了一种基于傅里叶变换的系统误差配准前航迹对准关联算法,该算法将组网雷达的航迹数据看做为一种整体信息,采用傅里叶变换理论来估计和补偿组网雷达目标航迹数据到融合中心航迹数据的相对旋转量和平移量,将雷达网中雷达上报的目标航迹数据对准到融合中心,从而不依赖于估计雷达网系统误差,实现了误差配准前的航迹准确关联,能够为后端的系统误差配准提供可靠的关联目标航迹数据。