Autofocusing of ISAR images based on entropy minimization

A novel autofocusing technique is developed for random translational motion compensation in inverse synthetic aperture radar (ISAR) imaging of objects. This technique is based on an entropy minimization principle and validated via a nonparametric estimation method. Images of a simulation and a real flying aircraft are used for illustration. Images of encouraging quality confirm the feasibility of autofocusing the radar images by just the requirement of minimizing the image entropy     

Comparison of Two Target Classification Techniques

It has been shown that radar returns in the resonance region carry information regarding the overall dimensions and shape of targets. Two radar target classification techniques developed to utilize such returns are discussed. Both of these techniques utilize resonance region backscatter measurements of the radar cross section (RCS) and the intrinsic target backscattered phase. A target catalog used for testing the techniques was generated from measurements of the RCS of scale models of modern aircraft and naval ships using a radar range at The Ohio State University. To test the classification technique, targets had their RCS and phase taken from the data base and corrupted by errors to simulate full-scale propagation path and processing distortion. Several classification methods were then used to determine how well the corrupted measurements fit the measurement target signatures in the catalog. The first technique uses nearest neighbor (NN) algorithms on the RCS magnitude and (range corrected) phase at a number (e.g., 2, 4, or 8) of operating frequencies. The second technique uses an inverse Fourier transformation of the complex multifrequency radar returns to the time domain followed by cross correlation. Comparisons are made of the performance of the two techniques as a function of signal-to-error noise power ratio for various processing options.     

Computer Simulation of Synthetic Aperture Radar Images of Three-Dimensional Objects

A digital simulation of coherent synthetic aperture radar (SAR) images of three-dimensional objects is described. The simulation is intended to produce representative SAR images that would be suitable for image analysis and pattern recognition studies. The procedure involves a modeling of the object using a combination of three-dimensional quadratic shapes yielding a smooth surface representation. The radar images of these models are then computed using physical optics scattering theory. Finite resolution both in range and cross-range direction is incorporated via a theoretical analysis which results in a simple Fourier transform representation of an equivalent "offset" window filter. Examples of the computer simulation for both infinite resolution and blurred or finite resolution are given for a KC-135 aircraft model.     

A Microwave Hologram Radar System

An airborne microwave hologram radar system has been developed which is a two-dimensional analog to optical holography. The field of view of the radar is directly below and to either side of the aircraft. Resolution is realized in the along-track direction by utilizing the synthetic aperture technique, and in the cross-track direction by means of a phased receiving array. The theory of operation is summarized, the demonstration system is described, and results for both the normal and contouring modes of operation are presented.     

基于CZT的机载并行双站斜视SAR成像算法

建立了机载并行双站斜视合成孔径雷达(SAR)的几何模型,给出了雷达回波的数学表达式,推导了它的二维频谱并对其特点做了分析。在二维频域内,先用聚焦函数对观测场景中心的点目标做精确成像,然后用Chirp-Z变换(CZT)校正中心点两侧目标回波的距离徙动,再通过方位向逆傅里叶变换得到了雷达图像。该算法利用了CZT能够处理非线性调频信号的特点,简化了处理过程,提高了计算效率和成像精度。仿真实验验证了这种基于CZT的新算法在处理并行双站斜视SAR数据时的有效性。     

ISAR imaging using an emulated multistatic radar system

The use of a monostatic radar configuration limits the ability of an inverse synthetic aperture radar (ISAR) system to image targets in certain geometries. By employing multistatic geometries this limitation may be overcome. This paper discusses the emulation of multistatic geometries, via sea surface multipath reflections, using a monostatic system. This application capitalises on the advantages provided by both monostatic and bistatic systems. The possibility of obtaining ISAR images using these emulated multistatic radar configurations is first theoretically discussed and then verified using experimental results.     

表面粗糙的复杂目标全极化ISAR图像快速仿真

为了获取基于模板图像的车辆、飞机等复杂目标识别所需的海量高质量逆合成孔径雷达(ISAR)图像,提出了表面粗糙的复杂目标全极化ISAR图像快速仿真方法。该方法预先对车辆和飞机等复杂目标表面粗糙程度进行分级定量描述,并以改进的射线弹跳法和等效边缘流法快速预估来自目标粗糙表面的镜面反射和多次反射贡献以及细分边缘的绕射贡献,经相干叠加获得目标的精确电磁散射数据,最后进行成像处理得到高质量全极化ISAR图像。标准体、飞机和车辆目标的仿真实验结果验证了该方法的准确性和有效性。     

P-3 ultra-wideband SAR: description and examples

Under the Advanced Research Projects Agency (ARPA)/ASTO sponsorship, through a contract from the Naval Air Warfare Center (NAWC), the Environmental Research Institute of Michigan (ERIM) has developed an ultrawideband (UWB) very high frequency (VHF)/ultrahigh frequency (UHF) fully polarimetric airborne synthetic aperture radar (SAR) for studying the detection of foliage-obscured objects. The radar is installed in the NAWC P-3 testbed aircraft and takes advantage of existing ERIM-built multimode, fully-polarimetric X/L/C-band SAR hardware. This paper describes the radar and presents some examples of its capabilities including polarimetric imagery and two-pass interferometric surface height estimates     

机载单通道雷达实波束扫描的前视探测

针对机载单通道雷达采用合成孔径雷达(SAR)技术、多普勒波束锐化(DBS)技术等途径难以实现载机飞行路线正前方高分辨率成像问题,研究了一种利用方位实波束重叠扫描的新型机载单通道雷达前视探测方法,讨论了提高方位分辨率的可行性和适用条件。该方法根据目标回波强度受到波束扫描增益调制的特点,通过计算修正的Capon空间谱来实现方位超分辨。模拟实验表明,所提方法能够实现机载单通道雷达的前视成像,可以显著提高波束主瓣区域内强弱临近目标的分辨能力。     

Integrated precision SAR targeting: a SAR targeting simulation

Operational deficiencies exist in the current ability to perform high resolution synthetic aperture radar (SAR) targeting for precision strike missions in difficult electronic countermeasure (ECM) and anti-aircraft environments. Increasingly sophisticated enemy defenses require that fire control information be derived from highly maneuverable aircraft trajectories rather than traditional straight-and-level flight. In addition, target area aspect information is needed to determine optimal attack approaches. These imaging and targeting conditions impose severe performance requirements on the sensor aircraft motion compensation system (MCS), and dictate the need for sophisticated algorithms to counteract ECM threats. This paper describes the development of a user friendly “Design Tool” for modeling and analysis of airborne radar system performance for SAR imaging and Precision SAR Targeting     

Dominant scatterer identification testing with an integrated X-bandradar system

Radar return data from airborne jet aircraft were collected and analyzed to determine the presence of consistent, dominant radar returns of point scatterers on aircraft simulating landing conditions. These measurements were performed by integrating two separate X-band radars into one system with the ability to simultaneously track and image aircraft. Selected processed data from both radar systems were analyzed and are presented for the airborne jet aircraft     

High resolution reconstruction of ISAR images

A 2-D high-resolution spectral analysis algorithm with application to an inverse synthetic aperture radar (ISAR) imaging, is presented. This algorithm is based on two-dimensional linear prediction using autoregressive (AR) coefficients. Stability is guaranteed by AR process pole adjustment. An ISAR target is modeled for a complex scatterer geometry. Computer simulation results are provided for the high-resolution reconstruction of ISAR images     

先进战斗机对机载射频孔径系统隐身的需求及解决方案

 大量的研究结果已经表明：机载天线等传感器孔径的分布与形状特征,对飞机隐身效果具有举足轻重的影响,如果不能有效控制机载射频(RF)孔径系统的特征信号(包括雷达散射截面(RCS)和电磁辐射控制),则通过外形、结构和材料隐身而达到的整机高隐身水平就会受到破坏。迄今为止,天线散射特性的评估是尚未完全解决的问题,而减缩天线RCS的手段和方法也有待深入研究。总结了F/A-22和F-35等国外先进隐身战斗机机载射频孔径系统隐身设计特点,从飞机总体隐身方案设计角度提出了对机载射频孔径系统隐身的需求,并针对具体应用提出最小化天线孔径数量、减小天线孔径外形尺寸、减缩天线孔径特征信号、采用低截获概率（LPI）技术等概念性解决方案。     

Localization of step changes in multitemporal SAR images

Deals with multitemporal sequences of synthetic aperture radar (SAR) images with regions possibly affected by step reflectivity patterns of change. Specifically, it addresses the problems of detecting a temporal step pattern with small reflectivity change against a constant pattern and of estimating the transition instant for the step. The statistically optimized signal processing techniques proposed in this work are most appropriate for the new generation of SAR systems with high revisit time that are currently under development. We propose two different techniques, based on the maximum likelihood (ML) approach, that make different use of prior knowledge on the radar cross section (RCS) levels of the searched pattern. They process the whole sequence to achieve optimal discrimination capability between regions affected and not affected by a step change and optimal estimation accuracy for the step transition instant. The first technique (known step pattern (KSP)-detector) assumes complete knowledge of the RCS levels of the searched pattern of change, while the second one (USP-detector) is based on the assumption of totally unknown step pattern.     

Synthetic-aperture radar processing using fast factorized back-projection

Exact synthetic aperture radar (SAR) inversion for a linear aperture may be obtained using fast transform techniques. Alternatively, back-projection integration in time domain can also be used. This technique has the benefit of handling a general aperture geometry. In the past, however, back-projection has seldom been used due to heavy computational burden. We show that the back-projection integral can be recursively partitioned and an effective algorithm constructed based on aperture factorization. By representing images in local polar coordinates it is shown that the number of operations is drastically reduced and can be made to approach that of fast transform algorithms. The algorithm is applied to data from the airborne ultra-wideband CARABAS SAR and shown to give a reduction in processing time of two to three orders of magnitude.     

机动目标的逆合成孔径雷达成像

 逆合成孔径雷达(ISAR)和合成孔径雷达 (SAR)都是利用目标 (场景)与雷达的相对运动,提高横向分辨率,实现对目标 (场景 )的成像。SAR的运动方是雷达平台,可控制作平稳飞行,且用仪器测校其偏离误差;ISAR的运动方通常是非合作目标,运动不受控制,且难以精确测量。当目标作机动飞行时,以目标作固定基准,雷达等效地在空间形成流形复杂的逆合成孔径 (阵列 ),对这种情况下成像的问题进行了系统的研究。     

Motion compensation errors: effects on the accuracy of airborne SAR images

This work addresses the study of the effect of residual uncompensated motion errors due to positioning measurement instrument and digital elevation model inaccuracies on the accuracy of airborne synthetic aperture radar (SAR) images. It is shown that these not only introduce phase errors following pure geometric considerations, but they also cause additional aberrations related to their interaction with the SAR processing procedure. Extension to the repeat pass airborne interferometry is also included to show their impact on the resulting interferograms.     

STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

Synthetic Aperture Imaging Radar and Moving Targets

This paper considers the effects of slowly moving targets as they appear in the output of an airborne coherent side-looking synthetic aperture imaging radar. The image of a moving reflector is described, and two approaches to airborne moving target indication (AMTI) are summarized. It is shown that the effects of target movement are decreased as the radar scan rate is increased, and are increased as the (Doppler processed) compression ratio is increased.     

Precision tracking algorithms for ISAR imaging

The simultaneous imaging and tracking of a moving target is one of the most difficult problems in inverse synthetic aperture radar (ISAR) signal processing. The problem is addressed here using a two-antenna imaging radar. The target range shift is sensed with an exponentially averaged envelope correlation algorithm while the angle change is measured with a differential phase shift algorithm. The three state Kalman filters are used in range and azimuth dimensions to provide both a filtered estimate and a one-sample-ahead prediction for the purpose of target tracking. The filtered range shift provides an accurate information for range bin alignment, and the target angle change provides the angular positions of the synthetic array elements. Therefore, the ISAR imaging simply becomes processing of a circular-arc aperture. The algorithms are verified both by computer simulations and also with experimental data processing