共查询到20条相似文献,搜索用时 570 毫秒
1.
网格计算是一种新兴的解决大规模复杂问题的应用技术,充分利用现有资源提供高性能的计算能力。现在的生产过程越来越向大规模复杂化方向发展,过程控制需要新的控制模型和控制方法来解决这些问题。但现有的计算能力无疑又限制了控制技术的应用,将高性能的网格计算运用到过程控制当中可以提高控制模型和控制算法的计算速度,也将大大提高其控制品质和应用范围。 相似文献
2.
3.
4.
针对大规模数值计算规模化管理的难题,采用网格计算技术将网络环境下分散的计算资源组建了CFD网格计算环境.采用主动接入方式,以中心服务器为核心的网格计算管理和服务模式,构建CFD网格计算环境,实现了CFD计算在网格环境内的自动化计算管理,提高了计算资源的利用效率,降低了设计人员的劳动强度. 相似文献
5.
随着信息处理技术的精度、可靠度等要求的进一步提高,采用高性能计算集群系统已经成为数字化制造中的关键技术之一.本文结合高性能计算应用现状的不足,阐述了Platform LSF软件设计思想和目标,介绍了该软件的实施与应用情况. 相似文献
7.
多面体网格在CFD中的应用 总被引:1,自引:0,他引:1
介绍了多面体网格技术在计算流体力学(CFD)中的应用.考虑到粘性计算的需要,将混合网格技术引入多面体网格中,发展了一套多面体网格生成及求解技术,并用于M6机翼、DLR-F6复杂外形的气动特性模拟中.计算结果表明,多面体网格技术具有准确度较高、效率较高及适用性广等优点. 相似文献
8.
9.
10.
走近军事网格 总被引:1,自引:0,他引:1
网格计算技术研究20世纪90年代起源于美国,也以美国最为兴盛。中国2000年开始该研究。起初网格是借鉴电力网的概念提出来的.如果说未来的IT是如水、电一样的公用设施.那么网格则是电网的配送系统,计算机和存储则是发电系统。目前,世界军事强国都在研究网格技术在军事上的应用,如美国军方为把下一代网络基础的Ipv6全面部署在“全球信息网格”中,作出了近千亿美元的IT预算。中国军方于2004年5月28日在南京理工大学正式挂牌成立“中国军事网格”研究中心。为推进中国特色军事变革提供新的技术支撑。中国军队正在规划、实施装备保障网格化.即以网格技术和多媒体技术为基础.将各级保障平台都置于计算机网格中的建设。 相似文献
11.
12.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
17.
18.
19.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
20.
基于马赫数分布可控曲面外/内锥形基准流场的前体/进气道一体化设计 总被引:4,自引:1,他引:3
提出了一种高超声速飞行器乘波前体的外锥形基准流场设计方法,在锥面马赫数分布规律给定的条件下,通过有旋特征线法实现反设计,提高了基准流场设计的灵活性。该基准流场通过锥形"下凹"弯曲激波和波后等熵压缩波系压缩气流,可以在较短的长度内完成高效压缩。基于反正切马赫数分布外锥形基准流场设计的乘波前体具有较高的容积率,乘波特性良好且出口均匀,设计点时有黏升阻比为1.89。另外,基于该乘波前体和马赫数分布可控的内收缩进气道给出了一种双乘波的前体与进气道一体化设计方案,实现了内外流分别独立乘波,充分发挥了乘波前体和内收缩进气道的各自优势。 相似文献