Exploring the solar system galactic frontier in extreme ultraviolet

The solar system galactic frontier—the region where the expanding solar wind meets the surrounding galactic medium—remains poorly explored. The sheer size of the essentially asymmetric heliosphere calls for remote techniques to probe the properties of its global time-varying three-dimensional boundary. The Interstellar Boundary Explorer (IBEX) mission (launch in 2008) will image the region between the termination shock and the heliopause, the heliospheric sheath, in fluxes of energetic neutral atoms. Global imaging in extreme ultraviolet (EUV) will likely be the next logical step in remote exploration of the galactic frontier from 1 AU. Imaging in EUV will establish directional and spectral properties of (1) the glow of singly charged helium (He⁺) ions in the interstellar and solar wind plasmas; (2) emissions of hot plasma in the Local Bubble; and (3) characteristic emissions of the solar wind. Global imaging with ultrahigh sensitivity and ultrahigh spectral resolution will map the heliopause and reveal the three-dimensional flow pattern of the solar wind, including the flow over the Sun's poles. This article presents the emerging concept of the experiment and space mission for heliosphere global imaging in EUV.     

Selected configuration tradeoffs of contour optical instruments

The Comet Nucleus Tour (CONTOUR) is a low-cost NASA Discovery mission designed to conduct three close flybys of comet nuclei. Selected configuration tradeoffs conducted to balance science requirements with low mission cost are reviewed. The tradeoffs discussed focus on the optical instruments and related spacecraft considerations. Two instruments are under development. The CONTOUR Forward Imager (CFI) is designed to perform optical navigation, moderate resolution nucleus/jet imaging, and imaging of faint molecular emission bands in the coma. The CONTOUR Remote Imager and Spectrometer (CRISP) is designed to obtain high-resolution multispectral images of the nucleus, conduct spectral mapping of the nucleus surface, and provide a backup optical navigation capability.Tradeoffs discussed are: (1) the impact on the optical instruments of not using reaction wheels on the spacecraft, (2) the improved performance and simplification gained by implementing a dedicated star tracker instead of including this function in CFI, (3) the improved flexibility and robustness of switching to a low frame rate tracker for CRISP, (4) the improved performance and simplification of replacing a visible imaging spectrometer by enhanced multispectral imaging in CRISP, and (5) the impact on spacecraft resources of these and other tradeoffs.     

MESSENGER at Mercury: Early orbital operations

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft, launched in August 2004 under NASA's Discovery Program, was inserted into orbit about the planet Mercury in March 2011. MESSENGER's three flybys of Mercury in 2008–2009 marked the first spacecraft visits to the innermost planet since the Mariner 10 flybys in 1974–1975. The unprecedented orbital operations are yielding new insights into the nature and evolution of Mercury. The scientific questions that frame the MESSENGER mission led to the mission measurement objectives to be achieved by the seven payload instruments and the radio science experiment. Interweaving the full set of required orbital observations in a manner that maximizes the opportunity to satisfy all mission objectives and yet meet stringent spacecraft pointing and thermal constraints was a complex optimization problem that was solved with a software tool that simulates science observations and tracks progress toward meeting each objective. The final orbital observation plan, the outcome of that optimization process, meets all mission objectives. MESSENGER's Mercury Dual Imaging System is acquiring a global monochromatic image mosaic at better than 90% coverage and at least 250 m average resolution, a global color image mosaic at better than 90% coverage and at least 1 km average resolution, and global stereo imaging at better than 80% coverage and at least 250 m average resolution. Higher-resolution images are also being acquired of targeted areas. The elemental remote sensing instruments, including the Gamma-Ray and Neutron Spectrometer and the X-Ray Spectrometer, are being operated nearly continuously and will establish the average surface abundances of most major elements. The Visible and Infrared Spectrograph channel of MESSENGER's Mercury Atmospheric and Surface Composition Spectrometer is acquiring a global map of spectral reflectance from 300 to 1450 nm wavelength at a range of incidence and emission angles. Targeted areas have been selected for spectral coverage into the ultraviolet with the Ultraviolet and Visible Spectrometer (UVVS). MESSENGER's Mercury Laser Altimeter is acquiring topographic profiles when the slant range to Mercury's surface is less than 1800 km, encompassing latitudes from 20°S to the north pole. Topography over the remainder of the southern hemisphere will be derived from stereo imaging, radio occultations, and limb profiles. MESSENGER's radio science experiment is determining Mercury's gravity field from Doppler signals acquired during frequent downlinks. MESSENGER's Magnetometer is measuring the vector magnetic field both within Mercury's magnetosphere and in Mercury's solar wind environment at an instrument sampling rate of up to 20 samples/s. The UVVS is determining the three-dimensional, time-dependent distribution of Mercury's exospheric neutral and ionic species via their emission lines. During each spacecraft orbit, the Energetic Particle Spectrometer measures energetic electrons and ions, and the Fast Imaging Plasma Spectrometer measures the energies and mass per charge of thermal plasma components, both within Mercury's magnetosphere and in Mercury's solar-wind environment. The primary mission observation sequence will continue for one Earth year, until March 2012. An extended mission, currently under discussion with NASA, would add a second year of orbital observations targeting a set of focused follow-on questions that build on observations to date and take advantage of the more active Sun expected during 2012–2013. MESSENGER's total primary mission cost, projected at $446 M in real-year dollars, is comparable to that of Mariner 10 after adjustment for inflation.     

Cost-driven design of small satellite remote sensing systems*

Earth remote sensing (alongside communications) is one of the key application of Earth-orbiting satellites. Civilian satellites in the LANDSAT and SPOT series provide Earth images which have been used for a vast spectrum of applications in agriculture, meteorology, hydrology, urban planning and geology, to name but a few. In the defence sector, satellite remote sensing systems are a critical tool in strategic and tactical planning – for the countries which can afford them. To date, remote sensing satellites have fallen into one of these two categories: military missions driven by the requirement for very high resolution and orbital agility; and multipurpose civil satellites using general purpose sensors to serve a diverse community of end users. For military-style missions, the drive to high resolution sets the requirements for optics, attitude control and downlink data bandwidth. For civil missions, the requirement to satisfy multiple, diverse user applications forces compromises on spectral band and orbit selection. Although there are exceptions, many small satellite remote sensing missions carry on in this tradition, concentrating on ultra high resolution products for multiple user communities. This results in satellites costing on the order of US $100 M, not optimised for any particular application. This paper explores an alternative path to satellite remote sensing, aiming simultaneously to reduce cost and to optimise imaging products for specific applications. By decreasing the cost of the remote sensing satellite system to a critical point, it becomes appropriate to optimise the sensor's spectral and temporal characteristics to fit the requirements of a small, specialised user base. The critical engineering trade-off faced in a cost driven mission is how to reduce mission cost while still delivering a useful product to the selected user. At the Surrey Space Centre, we have pursued an engineering path using two dimensional CCD array sensors, commercial off-the-shelf lenses and gravity-gradient stabilised microsatellites. In spite of the inherent limitations of such systems, recent successes with the Thai Microsatellite Company's Thai-Phutt satellite show that a system costing in the region of US $3 million, can approach the spectral and spatial characteristics of LANDSAT. Surrey's UoSAT-12 minisatellite (to be launched April, 1999) will further develop this cost-driven approach to provide 10 m panchromatic resolution and 30 m multi-spectral resolution. This paper describes the Thai-Phutt and UoSAT-12 imaging systems, explaining the engineering methods and trade-offs. Although Surrey is presently the only centre presently pursuing such implementations, our paper shows that they deserve wider consideration.     

MERLIN: Mars-Moon Exploration,Reconnaissance and Landed Investigation

Mars' moons Phobos and Deimos are low-albedo, D-type bodies that may preserve samples of outer solar system material that contributed organics and volatiles to the accreting terrestrial planets. A Discovery-class mission concept described in this paper, the Mars-Moon Exploration, Reconnaissance and Landed Investigation (MERLIN), will obtain in situ measurements from Deimos to test models for the moon's origin. The measurement objectives of MERLIN are to determine Deimos' elemental and mineralogical composition, to investigate its volatile and organic content, and to characterize processes that have modified its surface. To achieve these objectives, a landed payload will provide stereo imaging and measurements of elemental and mineralogical composition and interior structure. An orbital payload will acquire global high-resolution and color imaging, putting the landing site in context by characterizing Deimos' geology. Following MOI the spacecraft flies in formation with Deimos, and uses small changes in its orbit around Mars to investigate Deimos from a range of altitudes and illuminations over 4 months. Data taken during 1- to 2-km altitude flyovers will certify a landing site. The spacecraft will be delivered to a point several kilometers above Deimos, and will navigate to landing on a fresh exposure of regolith using onboard imaging. 90 days of baseline landed operations will provide a complete set of measurements, with schedule reserve, and there is sufficient propellant to repeat the measurements at a second site.     

Chandrayaan-1 mission to the Moon

Chandrayaan-1 is the first Indian planetary exploration mission that will perform remote sensing observation of the Moon to further our understanding about its origin and evolution. Hyper-spectral studies in the 0.4– region using three different imaging spectrometers, coupled with a low energy X-ray spectrometer, a sub-keV atom analyzer, a 3D terrain mapping camera and a laser ranging instrument will provide data on mineralogical and chemical composition and topography of the lunar surface at high spatial resolution. A low energy gamma ray spectrometer and a miniature imaging radar will investigate volatile transport on lunar surface and possible presence of water ice in the polar region. A radiation dose monitor will provide an estimation of energetic particle flux en route to the Moon as well as in lunar orbit. An impact probe carrying a mass spectrometer will also be a part of the spacecraft. The 1 ton class spacecraft will be launched by using a variant of flight proven indigenous Polar Satellite Launch Vehicle (PSLV-XL). The spacecraft will be finally placed in a 100 km circular polar orbit around the Moon with a planned mission life of two years.     

Intuitive ultrasonography for autonomous medical care in limited-resource environments

Management of health problems in limited resource environments, including spaceflight, faces challenges in both available equipment and personnel. The medical support for spaceflight outside Low Earth Orbit is still being defined; ultrasound (US) imaging is a candidate since trials on the International Space Station (ISS) prove that this highly informative modality performs very well in spaceflight. Considering existing estimates, authors find that US could be useful in most potential medical problems, as a powerful factor to mitigate risks and protect mission. Using outcome-oriented approach, an intuitive and adaptive US image catalog is being developed that can couple with just-in-time training methods already in use, to allow non-expert crew to autonomously acquire and interpret US data for research or diagnosis.The first objective of this work is to summarize the experience in providing imaging expertise from a central location in real time, enabling data collection by a minimally trained operator onsite. In previous investigations, just-in-time training was combined with real-time expert guidance to allow non-physician astronauts to perform over 80 h of complex US examinations on ISS, including abdominal, cardiovascular, ocular, musculoskeletal, dental/sinus, and thoracic exams. The analysis of these events shows that non-physician crew-members, after minimal training, can perform complex, quality US examinations. These training and guidance methods were also adapted for terrestrial use in professional sporting venues, the Olympic Games, and for austere locations including Mt. Everest.The second objective is to introduce a new imaging support system under development that is based on a digital catalog of existing sample images, complete with image recognition and acquisition logic and technique, and interactive multimedia reference tools, to guide and support autonomous acquisition, and possibly interpretation, of images without real-time link with a human expert. In other words, we are attempting to replace, to the extent possible, expert guidance by guidance from a digital information resource. This is a next logical phase of the authors’ sustained effort to make US imaging available to sites lacking proper expertise. This effort will benefit NASA as the agency plans to develop future human exploration programs requiring increased medical autonomy. The new system will be readily adaptable to terrestrial medicine including emergency, rural, and military applications.     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

Naval EarthMap Observer (NEMO) program and the Naval Space Science and Technology Program Office

In February 1997 the Chief of Naval Research chartered the Naval Space Science and Technology (S&T) Program Office, at the Office of Naval Research, to operate as the central point of contact for the Department of the Navy's (DON's) S&T activities in space. The Office was chartered to enhance the DON's space efforts through interdepartmental integration and linkage with external Department of Defense (DOD) commands and government agencies. The Office's goal is to optimize a plan for S&T coherency, synergy, and relevancy to effect technology transition to the DON's Systems Commands or Program Executive Offices (PEO's) while developing an investment strategy that accommodates and leverages the commonality of commercial and consumer thrust areas and products.

This paper will focus on the “Flagship” Naval Space S&T Program, the Naval EarthMap Observer (NEMO) Program, as one example of how the Office is executing its mission. It will discuss how, through NEMO, the Navy is able to leverage commercial industry and other US government agency requirements and resources to meet unique Naval needs. Finally, the paper will discuss the specifics of NEMO, the Navy's roles and responsibilities and how the Navy will use NEMO in its mission to characterize the littoral regions of the world.

Through the NEMO satellite system, the Navy will develop a large hyperspectral imagery database which will be used to characterize and model the littoral regions of the world. NEMO will provide images using its Coastal Ocean Imaging Spectrometer (COIS) Instrument along with a co-registered 5m Panchromatic Imager (PIC). With 210 spectral channels over a bandpass of 0.4 to 2.5μm and very high signal-to-noise ratio (SNR), the COIS instrument is optimized for the low reflectance environment of the littoral region. COIS will image over a 30km wide swath with a 60m Ground Sample Distance (GSD), and can image at a 30m GSD with ground motion compensation. A 10:30am, sun-synchronous circular orbit of 605km enables continuous repeat coverage of the whole earth. A unique aspect of the system is the spectral feature extraction and data compression software algorithm developed by the Naval Research Laboratory (NRL) called the Optical Real-Time Spectral Identification System (ORA-SIS). ORASIS employs a parallel, adaptive hyperspectral method for real-time scene characterization, data reduction, background suppression, and target recognition. The use of ORASIS is essential for management of the massive amounts of data expected from the NEMO HSI system, and for development of Naval products. Specific Naval products include bathymetry, water clarity, bottom type, atmospheric visibility, bioluminescence, beach characterization, under-water hazards, total column atmospheric water vapor, and detection and mapping of sub-visible cirrus. Demonstrations of timely downlinks of real-time hyperspectral imagery data to the Naval warfighter are also being developed. The NEMO satellite is planned for launch in mid-2000 followed by an operational period of 3 to 5 years.     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

陆探四号01星微波通道在轨自主相位补偿方法

地球同步轨道星载合成孔径雷达系统单次成像任务时间长达千秒级且具有较高热耗。成像过程中,多通道射频链路上多种设备均会发生插入相移随温度漂移现象,导致方位向相位相关性变差进而影响系统的成像性能。为了解决该问题,文章中提出了一种在轨自主实时温度相位补偿方法。该方法将上百台设备/电缆的温度相位数据进行优化存储,在成像时实时读取温度后查表计算链路相位变化并进行补偿,具有灵活适应多种模式、存储及逻辑轻量、可靠稳定等特点。仿真和测试验证了该方法可有效提升系统长时间工作工况下成像性能,已成功实现在轨应用。     

基于光谱特性的高光谱图像压缩方案

根据干涉型高光谱成像仪成像特点,提出了一种针对干涉型光谱仪所获得高光谱图像的基于光谱特性的图像压缩方案。由于光谱信息最终从“点”十涉图像中恢复,因此方案中首先通过高精度匹配技术将原始“像面”干涉图像序列“重组”成“点”干涉图像,然后针对“点”干涉图像序列进行压缩。在重组过程中采取基于光流的亚像素级匹配和基于梯度的三角插值算法,实现了高精度的图像匹配重组;在压缩环节利用“点”干涉图像与光谱信息之间的傅立叶变换关系,提出一种能够很好保持频谱特性的基于一维DCT的压缩算法。实验证明,压缩算法总体性能远高于针对“像而”干涉圈序列的压缩算法．很好地控制了光谱信息的失真。     

Results of the parabolic flight tests of the rapunzel deployer

The tether assisted re-entry of small payloads is a highly interesting tool for space transportation especially for the return of small payloads from Space Station ISSA. The small tether mission Rapunzel was initiated in 1991 by the Institute of Astronautics, TU München and the Kayser-Threde Company, to design a low cost and feasible tether experiment for the verification of the tether assisted re-entry. Together with the Samara State Aerospace University, Russia, a mission concept on a Russian Resurs or Photon capsule was developed. Based on this mission a deployer has been designed, mainly based on technology of the textile industry, which insures high reliability at low cost. Recently a similar configuration is being discussed for the ESA-TSE mission.The main work during the recent time was the development and test of the breadboard model of the deployer system. After successfully completing initial ground tests with the deployer, further tests during the ESA Parabolic Flight campaign in November 1995 were conducted. After a short introduction of the overall mission scenario, the planned configuration in orbit, this paper will present the results of the microgravity test campaign onboard the KC-135 aircraft and compare them with the ground test. The deployer showed a good performance during all tests, including ejection of the end-mass, deployment, and braking. Problems that occurred during the tests will be discussed, and solutions for the detected flaws and the results of the redesign now in progress will be presented. These verifications have shown the feasibility of the concept and will lay the base for the planned development of the flight model of the deployer.     

Effects of simulated space radiation on immunoassay components for life-detection experiments in planetary exploration missions

Abstract The Life Marker Chip (LMC) instrument is part of the proposed payload on the ESA ExoMars rover that is scheduled for launch in 2018. The LMC will use antibody-based assays to detect molecular signatures of life in samples obtained from the shallow subsurface of Mars. For the LMC antibodies, the ability to resist inactivation due to space particle radiation (both in transit and on the surface of Mars) will therefore be a prerequisite. The proton and neutron components of the mission radiation environment are those that are expected to have the dominant effect on the operation of the LMC. Modeling of the radiation environment for a mission to Mars led to the calculation of nominal mission fluences for proton and neutron radiation. Various combinations and multiples of these values were used to demonstrate the effects of radiation on antibody activity, primarily at the radiation levels envisaged for the ExoMars mission as well as at much higher levels. Five antibodies were freeze-dried in a variety of protective molecular matrices and were exposed to various radiation conditions generated at a cyclotron facility. After exposure, the antibodies' ability to bind to their respective antigens was assessed and found to be unaffected by ExoMars mission level radiation doses. These experiments indicated that the expected radiation environment of a Mars mission does not pose a significant risk to antibodies packaged in the form anticipated for the LMC instrument. Key Words: Life-detection instruments-Planetary habitability and biosignatures-Radiation-Mars-Life in extreme environments. Astrobiology 12, 718-729.     

Small satellite's role in future hyperspectral Earth observation missions

Along with various advanced satellite onboard sensors, an important place in the near future will belong to hyperspectral instruments, considered as suitable for different scientific, commercial and military missions. As was demonstrated over the last decade, hyperspectral Earth observations can be provided by small satellites at considerably lower costs and shorter timescales, even though with some limitations on resolution, spectral response, and data rate. In this work the requirements on small satellites with imaging hyperspectral sensors are studied. Physical and technological limitations of hyperspectral imagers are considered. A mathematical model of a small satellite with a hyperspectral imaging spectrometer system is developed. The ability of the small satellites of different subclasses (micro- and mini-) to obtain hyperspectral images with a given resolution and quality is examined. As a result of the feasibility analysis, the constraints on the main technical parameters of hyperspectral instruments suitable for application onboard the small satellites are outlined. Comparison of the data for designed and planned instruments with simulation results validates the presented approach to the estimation of the small satellite size limitations. Presented analysis was carried out for sensors with conventional filled aperture optics.     

The modular optelectronic multispectral scanner system for spaceborne remote sensing

A multispectral scanner system for spaceborne remote sensing of land and coastal/ocean features is under development for the German Ministry for Research and Technology. The system is based on the use of multilinear detector arrays for visible and infrared spectral bands.The electronically scanning image system MOMS (Modular Optoelectronical Multispectral Scanner) consists of individual spectral channel modules which can be grouped to dedicated mission tasks. Those dedicated tasks are land surface thematic mapping, sea or vegetation monitoring and in a stereo mode conventional photo interpretation and mapping.The basic performance data would allow up to 10,000 pixels per scan line, corresponding to about 20 m resolution at 200 km swath width out of observation satellite altitudes with narrower spectral bands than used on the current systems. High spectral resolution (up to 20 nm) is feasible at medium spatial resolution (～ 60 m).An experimental airborne scanner has been successfully flown in spring 1978. High-resolution modules development in the visible/NIR is under way and will be flight tested in early 1981.     

Astrobiological considerations for the selection of the geological filters on the ExoMars PanCam instrument

The Panoramic Camera (PanCam) instrument will provide visible-near IR multispectral imaging of the ExoMars rover's surroundings to identify regions of interest within the nearby terrain. This multispectral capability is dependant upon the 12 preselected "geological" filters that are integrated into two wide-angle cameras. First devised by the Imager for Mars Pathfinder team to detect iron oxides, this baseline filter set has remained largely unchanged for subsequent missions (Mars Exploration Rovers, Beagle 2, Phoenix) despite the advancing knowledge of the mineralogical diversity on Mars. Therefore, the geological filters for the ExoMars PanCam will be redesigned to accommodate the astrobiology focus of ExoMars, where hydrated mineral terrains (evidence of past liquid water) will be priority targets. Here, we conduct an initial investigation into new filter wavelengths for the ExoMars PanCam and present results from tests performed on Mars analog rocks. Two new filter sets were devised: one with filters spaced every 50?nm ("F1-12") and another that utilizes a novel filter selection method based upon hydrated mineral reflectance spectra ("F2-12"). These new filter sets, along with the Beagle 2 filter set (currently the baseline for the ExoMars PanCam), were tested on their ability to identify hydrated minerals and biosignatures present in Mars analog rocks. The filter sets, with varying degrees of ability, detected the spectral features of minerals jarosite, opaline silica, alunite, nontronite, and siderite present in these rock samples. None of the filter sets, however, were able to detect fossilized biomat structures and small (<2?mm) mineralogical heterogeneities present in silica sinters. Both new filter sets outperformed the Beagle 2 filters, with F2-12 detecting the most spectral features produced by hydrated minerals and providing the best discrimination between samples. Future work involving more extensive testing on Mars analog samples that exhibit a wider range of mineralogies would be the next step in carefully evaluating the new filter sets.     

Modelling and simulation of the space mission MICROSCOPE

MICROSCOPE is a French space mission for testing the weak equivalence principle (WEP). The mission goal is the determination of the Eötvös parameter $\eta$ with an accuracy of 10^?15. The French space agency CNES is responsible for the satellite which is developed and produced within the Myriade series. The satellite's payload T-SAGE (Twin Space Accelerometer for Gravitation Experimentation) is developed and built by the French institute ONERA. It consists of two high-precision capacitive differential accelerometers. One accelerometer is used as reference sensor with two test masses of platinum, the science sensor contains a platinum and a titanium proof mass. The detection of the test mass movement and their control is done via a complex electrode system. As a member of the MICROSCOPE performance team, the German department ZARM will be involved in the data analysis of the MICROSCOPE mission. For this purpose, mission simulations and the preparation of the mission data evaluation in close cooperation with the French partners CNES, ONERA and OCA are realised. The development status of the simulation tool which will represent the complex spacecraft dynamics and all error sources in order to design and test data reduction procedures is presented and some features are discussed in detail.     

Measurement and stability of the pointing of the BepiColombo Laser Altimeter under thermal load

The BepiColombo Laser Altimeter (BELA) has been selected to fly on ESA?s BepiColombo mission to Mercury. The instrument will be the first European laser altimeter designed for interplanetary flight. This paper describes the setup used to characterize the angular movements of BELA under the simulated environmental conditions that the instrument will encounter when orbiting Mercury. The system comprises a laser transmitter and a receiving telescope, which can move with respect to each other under thermal load. Tests performed using the Engineering Qualification Model show that the setup is accurate enough to characterize angular movements of the instrument components to an accuracy of ≈10 μrad. The qualification instrument is thermally stable to operate during all mission phases around Mercury proving that the transmitter and receiver sections will remain within the alignment requirements during its mission.     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.