有效载荷机柜结构优化设计

有效载荷机柜是载人航天器密封舱内安装有效载荷的重要结构,在设计上既要具备一定的刚度保证,以满足发射力学环境要求,又要通过减轻自身重量来提高有效载荷发射能力。文章根据载人航天器密封舱的基本结构设计要求,完成了有效载荷机柜结构的基线设计,进行了有效载荷机柜的有限元建模和模态分析,以减重为目标,刚度为约束条件,完成了有效载荷机柜结构优化设计,并基于敏感度分析得到了有效载荷机柜结构设计参数对其刚度的影响关系。文章的分析思路和研究结果对工程设计具有指导意义。     

DTFT-1: Analysis of the first USV flight test

The first dropped transonic flight test (DTFT) of the USV Program, performed with Castor, the first of the two spacecrafts developed within the USV Program, was performed on Saturday 24th February 2007, from Tortolì Airport in Sardinia.At 8:30 a.m. the 340 000 m³ stratospheric balloon lifted off from the East coast of Sardinia, bringing the flying test bed (FTB) up to 20.2 km before release within the isolated sea polygon controlled by Italian air force test range in Salto di Quirra (PISQ). The mission ended at 10:30 a.m. with the splash-down of the space vehicle.The flight itself was very good, with a nose-up manoeuvre under transonic conditions, reaching a maximum Mach as high as 1.08. The mission target was completely achieved as some 2 million measures were taken related to flight data, housekeeping, as well as 500 aerodynamic and structural experimental sensors. Unfortunately, the vehicle has been damaged more than expected during splash-down.Many national and international institutions and industries contributed to the mission carrying out, under the supervision and technical guide of CIRA: Italian Space Agency, Italian Air Force, Italian Navy, Italian Civil Aviation Authority, Italian Company for Air Navigation Services, Port Authorities, European Space Agency, Techno System Dev., Vitrociset, Carlo Gavazzi Space, Space Software Italia, Alcatel Alenia Space Italy, ISL-Altran Group.The paper reports the actual status of post-flight data analysis.     

Overview of scientific payloads onboard the KSR-III rocket

The Korea Sounding Rocket-III (KSR-III) was successfully launched on November 28, 2002 from the west coast of the Korean Peninsula. The science payload onboard the KSR-III included an ozone detector and two magnetometers along with other various sensors installed to measure physical characteristics such as temperature, pressure, strain, and acceleration. The main objective of KSR-III was to evaluate the liquid propulsion engine system which has been newly adopted in the KSR series. In addition to this main objective, the science payload conducted atmospheric soundings. The payload data were transmitted to the ground station in real time by an onboard telemetry system. The UV radiometer measured the direct solar UV radiation and during the ascending phase the vertical ozone density profile was obtained. This result was compared with coincident measurements taken by other satellites, a ground station, and an ozonesonde. A fluxgate-type magnetometer was onboard the KSR-III to observe the Earth's DC magnetic field and for AC field measurements, a search-coil magnetometer was installed. This was the first Korean mission to use magnetometers on a rocket-borne platform to measure the Earth's magnetic field. Using the telemetry magnetometer data, a study on the rocket attitude was carried out. This paper will give an overview of the design, calibration, and test results of the science payload onboard the KSR-III.     

Marangoni heat pipe: An experiment on board MIOsat Italian microsatellite

This article summarizes the activities in preparation of a microgravity experiment to be carried out by using a small technological payload onboard a microsatellite developed by the Italian Space Agency. A dedicated hardware will be developed to investigate innovative heat pipes filled with self-rewetting fluids, i.e. dilute aqueous alcoholic solutions with unique surface tension properties. After a general introduction of the scientific background, the paper is focused on the main activities in preparation of the flight experiment, on the design of the flight hardware and on the experimental planned procedure. The laboratory results achieved on ground in preparation of a flight experiment are also presented, including measurements of fluids physical properties and preliminary heat pipes performances characterization test. From the engineering point of view, the activities dealing with heat pipes filling and sealing are included. The activities for heat pipe characterization conclude the paper.     

A star scan/attitude determination experiment conducted on the geostationary meteorological satellite

The paper discusses the results of a star scan test performed on the spin stabilized Geostationary Meteorological Satellite (GMS) and used for the purpose of determining the vehicle's spin state. The test data shows that the payload camera, normally used for imaging the Earth and its cloud cover, sees a sufficient number of stars to provide for a rapid and accurate spin state update and that Earth and Sun blockage constraints have essentially no impact on the star detection process. Also presented are analytical results regarding how many stars constitute an observable set, the accuracy achievable using the five most easily detected stars, how star location affects state uncertainty, and why certain state components are more easily determined than others. The primary test conclusion is that star scan offers an attractive alternative to the presently used Earth horizon and landmark tracking attitude determination methods, as far as accuracy and computational complexity are concerned, provided the occasional star viewing intervals that are required do not interfere with the meteorological scheduling of the camera.     

Investigation & analysis of transient luminous phenomena in the low atmosphere of Hessdalen valley,Norway

For over 100 years, transient luminous phenomena have been seen in the Hessdalen valley. Italian and Norwegian scientists, gaining experience from the SETI program, has since 1998 installed cameras, spectrometers and RADAR's to unveil the nature of this phenomenon. Results indicate a combustion process driven by an unknown power source.     

FPGA-based operational concept and payload data processing for the Flying Laptop satellite

Flying Laptop is the first small satellite developed by the Institute of Space Systems at the Universität Stuttgart. It is a test bed for an on-board computer with a reconfigurable, redundant and self-controlling high computational ability based on the field programmable gate arrays (FPGAs). This Technical Note presents the operational concept and the on-board payload data processing of the satellite. The designed operational concept of Flying Laptop enables the achievement of mission goals such as technical demonstration, scientific Earth observation, and the payload data processing methods. All these capabilities expand its scientific usage and enable new possibilities for real-time applications. Its hierarchical architecture of the operational modes of subsystems and modules are developed in a state-machine diagram and tested by means of MathWorks Simulink-/Stateflow Toolbox. Furthermore, the concept of the on-board payload data processing and its implementation and possible applications are described.     

FPGA-based operational concept and payload data processing for the Flying Laptop satellite

Flying Laptop is the first small satellite developed by the Institute of Space Systems at the Universität Stuttgart. It is a test bed for an on-board computer with a reconfigurable, redundant and self-controlling high computational ability based on the field programmable gate arrays (FPGAs). This Technical Note presents the operational concept and the on-board payload data processing of the satellite. The designed operational concept of Flying Laptop enables the achievement of mission goals such as technical demonstration, scientific Earth observation, and the payload data processing methods. All these capabilities expand its scientific usage and enable new possibilities for real-time applications. Its hierarchical architecture of the operational modes of subsystems and modules are developed in a state-machine diagram and tested by means of MathWorks Simulink-/Stateflow Toolbox. Furthermore, the concept of the on-board payload data processing and its implementation and possible applications are described.     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

The dynamics of the space shuttle orbiter with a flexible payload

The Space Shuttle Orbiter will be used as an orbital base for near-term space operations. Its payloads will range from compact satellites to large, flexible antennas. This paper addresses the problem of the dynamics and control of the Orbiter with a flexible payload. Two different cases are presented as examples. The first is a long, slender beam which might be used as an element in a large orbiting structure. The second is a compact satellite mounted on a spin table in the Orbiter payload bay. The closed loop limit cycles are determined for the first payload and the open loop eigenvalues are calculated for the second. Models of both payloads are mechanized in a simulation with the Shuttle on-orbit autopilot. The vehicle is put through a series of representative maneuvers and its behavior analyzed. The degree of interaction for each payload is determined and strategies are discussed for its reduction.     

Biomedical program of the ALTAIR french russian flight onboard the MIR station

One year after the achievemant of the 2 weeks ANTARES french-russian mission in the MIR station in July 1992, a 22 days ALTAÏR mission with a french cosmonaut has been performed in July 1993, making use of the scientific payload remaining on board. Taking benefit of the analysis of the previous mission, the experimental protocols were adapted to refine scientific objectives and gave to the scientists the opportunity to enhance quantitatively and qualitatively their results. The french biomedical program, conducted in close scientific cooperation with IMBP and associated laboratories, was composed of 8 experiments out of which 2 were new with regards to the ANTARES program. In the field of cardio-vascular physiology and fluid regulation, the experiments: ORTHOSTATISME, DIURESE have been renewed and complemented by the TISSU experiment (proposed by a german scientist) and a real-time tele-assistance program using US echography technic and ground support from the french CADMOS support control center located in Toulouse. With respect to neurosciences objectives, to the experiments VIMINAL (cognitive processes) and ILLUSIONS (study of proprioceptives cues), was added the SYNERGIES experiment to analyse the postural adjustements during movement. The IMMUNOLOGIE experiment carried on and the radiobiological experiment BIODOSE ended.

Adding the results of the 2 missions ANTARES and ALTAÏR, and the data obtained in between onboard with russian cosmonauts, the scientists have received a wealth of physiological data and gained reproducibility and confidence in their results.     

The IRS-P3 remote sensing mission

ISRO has developed the PSLV rocket (Polar Spacecraft Launch Vehicle) for polar orbiting satellites up to 1000 kg and is conducting a series of test missions. One of this is the IRS-P3, an remote sensing satellite with German participation. The payload consists of 3 scientific instruments: The wide field sensor WiFS for vegetation monitoring (ISRO), the imaging spectrometer MOS (DLR/Germany) for coastal zone and ocean studies an the X-ray astronomy payload (ISRO). The paper gives technical details and parameters on the launch vehicle, the satellite, the instruments and scientific goals and data utilization.     

基于LabWindows动态链接库技术的航天器有效载荷通用测试系统的开发研究

航天器有效载荷产品的生产研制具有种类多、批次多、批量小等特点。为了提升有效载荷产品自动测试系统的软件灵活性,以应对测试项目复杂性增加所带来的挑战,提出了一种基于动态链接库技术的测试系统软件架构。该架构具备线程管理、仪器资源管理和测试序列编辑的功能,通过三层动态链接库的关联结构设计实现了自动测试系统中用户管理、业务逻辑和仪器控制的软件功能,同时给出了系统架构中各个模块的详细设计方案,最后通过产品测试验证了系统功能。提出的基于动态链接库技术组成的系统架构具有更小的程序粒度和良好的扩展性。通过三层动态链接库模块之间的灵活配置与重构,使得测试系统软件整体功能得到不断升级,极大地满足了当前航天有效载荷产品生产研制对于集成测试系统的需求,从而为航天器测试系统架构设计提供了的一种新思路。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

有源天线联试中的几点实用经验与分析

有源天线顾名思义,不仅仅包含传统意义上的无源部件,更多地是向系统级别迈进,这就要求天线设计研制人员需要掌握更多的＂有源＂部件方面的知识。文章给出了某有源天线联试过程中所积累的一些经验,并对其进行了分析,为更多从事有源天线设计的技术人员提供参考。     

Plastic Cubesat: An innovative and low-cost way to perform applied space research and hands-on education

This paper describes the design and the manufacturing of a Cubesat platform based on a plastic structure.The Cubesat structure has been realized in plastic material (ABS) using a “rapid prototyping” technique. The “rapid prototyping” technique has several advantages including fast implementation, accuracy in manufacturing small parts and low cost. Moreover, concerning the construction of a small satellite, this technique is very useful thanks to the accuracy achievable in details, which are sometimes difficult and expensive to realize with the use of tools machine. The structure must be able to withstand the launch loads. For this reason, several simulations using an FEM simulation and an intensive vibration test campaign have been performed in the system development and test phase. To demonstrate that this structure is suitable for hosting a complete satellite system, offering innovative integrated solutions, other subsystems have been developed and assembled.Despite its small size, this single unit (1U) Cubesat has a system for active attitude control, a redundant telecommunication system, a payload camera and a photovoltaic system based on high efficiency solar cells.The developed communication subsystem has small dimensions, low power consumption and low cost. An example of the innovations introduced is the antenna system, which has been manufactured inside the ABS structure. The communication protocol which has been implemented, the AX.25 protocol, is mainly used by radio amateurs. The communication system has the capability to transmit both telemetry and data from the payload, in this case a microcamera.The attitude control subsystem is based on an active magnetic system with magnetorquers for detumbling and momentum dumping and three reaction wheels for fine control. It has a total dimension of about 50×50×50 mm. A microcontroller implements the detumbling control law autonomously taking data from integrated magnetometers and executes pointing maneuvers on the basis of commands received in real time from ground.The subsystems developed for this Cubesat have also been designed to be scaled up for larger satellites such as 2U or 3U Cubesats. The additional volume can be used for more complex payloads. Thus the satellite can be used as a low cost platform for companies, institutions or universities to test components in space.     

双体卫星对日定向姿态机动控制

研究了双体卫星(DFP)对日定向姿态机动控制问题。首先分析双体卫星工作机理，建立载荷舱与平台舱姿态模型，推导磁浮机构线圈和磁钢相对距离的数学表达式。提出基于PD控制的载荷舱对日姿态机动、平台舱姿态跟踪以及两舱避碰等控制策略。在此基础上，为提高平台舱姿态跟踪速度，设计反步控制器对平台舱飞轮的动态特性进行补偿。进一步，为提高两舱协同控制性能，对传统PD控制进行改进，提出基于变增益PD控制的载荷舱姿态机动控制律，将两舱相对姿态信息包含在载荷舱对日姿态机动控制律中，有效降低了两舱碰撞风险，提高了两舱姿态机动速度。仿真结果表明，本文控制算法能有效实现双体卫星对日定向，且能避免两舱碰撞。     

Benefits from incorporation of combined cycle propulsion

The X-33 program was initiated to develop a testbed for integrated RLV technologies that pave the way for a full scale development of a launch vehicle (Venture Star). Within the Nasa Future X Trailblazer program there is an Upgrade X-33 that focuses on materials and upgrades. The authors propose that the most significant gains can be realized by changing the propulsion cycle, not materials. The cycles examined are rocket cycles, with the combustion in the rocket motor. Specifically, these rocket cycles are: turbopump, topping, expander, air augmented, air augmented ram, LACE and deeply cooled. The vehicle size, volume, structural weight remain constant. The system and propellant tank weights vary with the propulsion system cycle. A reduction in dry weight, made possible by a reduced propellant tank volume, was converted into payload weight provided sufficient volume was made available by the propellant reduction. This analysis was extended to Venture Star for selected engine cycles. The results show that the X-33 test bed could carry a significant payload to LEO (10,000 Ib) and be a valuable test bed in developing a frequent flight to LEO capability. From X-33 published information the maximum speed is about 15,000 ft/sec. With a LACE rocket propulsion system Venture Star vehicle could be sized to a smaller vehicle with greater payload than the Venture Star baseline. Vehicle layout and characteristics were obtained from: http:// www.venturestar.com.     

Atlas II and IIA analyses and environments validation

General Dynamics has now flown all four versions of the Atlas commercial launch vehicle, which cover a payload weight capability to geosynchronous transfer orbit (GTO) in the range of 5000–8000 lb. The key analyses to set design and environmental test parameters for the vehicle modifications and the ground and flight test data that validated them were prepared in paper IAF-91-170 for the first version, Atlas I.

This paper presents similar data for the next two versions, Atlas II and IIA. The Atlas II has propellant tanks lengthened by 12 ft and is boosted by MA-5A rocket engines uprated to 474,000 lb liftoff thrust. GTO payload capability is 6225 lb with the 11-ft fairing. The Atlas IIA is an Atlas II with uprated RL10A-4 engines on the lengthened Centaur II upper stage. The two 20,800 lb thrust, 449 s specific impulse engines with an optional extendible nozzle increase payload capability to GTO to 6635 lb. The paper describes design parameters and validated test results for many other improvements that have generally provided greater capability at less cost, weight and complexity and better reliability. Those described include: moving the MA-5A start system to the ground, replacing the vernier engines with a simple 50 lb thrust on-off hydrazine roll control system, addition of a POGO suppressor, replacement of Centaur jettisonable insulation panels with fixed foam, a new inertial navigation unit (INU) that combines in one package a ring-laser gyro based strapdown guidance system with two MIL-STD-1750A processors, redundant MIL-STD-1553 data bus interfaces, robust Ada-based software and a new Al-Li payload adapter. Payload environment is shown to be essentially unchanged from previous Atlas vehicles. Validation of load, stability, control and pressurization requirements for the larger vehicle is discussed.

All flights to date (five Atlas II, one Atlas IIA) have been successful in launching satellites for EUTELSAT, the U.S. Air Force and INTELSAT. Significant design parameters validated by these flights are presented. Particularly noteworthy has been the performance of the INU, which has provided average GTO insertion errors of only 10 miles apogee, 0.2 miles perigee and 0.004 degrees inclination. It is concluded that Atlas II/IIA have successfully demonstrated probably the largest number of current state-of-the-art components of any expendable launch vehicle flying today.     

大型整流罩地面分离仿真预示与试验研究

首先利用弹簧效能系数折减法对某大型整流罩的弹性有限元模型进行合理简化,然后基于耦合欧拉-拉格朗日（Coupled Eulerian-Lagrangian, CEL）算法对其地面分离试验进行仿真预示,获得了整流罩分离过程中的流场分布规律和分离特性,并分别与传统方法及地面试验进行对比,发现基于CEL算法的仿真结果比传统方法更接近试验结果,可作为工程应用的参考方法。