共查询到19条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
超小型锁相遥测发射机模块化研制 总被引:1,自引:0,他引:1
介绍我所研制的用于弹、星载遥测系统的两点注入微波销相调频发射机的基本组成、原理分析和模块化设计,并给出了测量结果。从测量数据中可以看出,该遥测发射机具有体积小、重量轻、性能好和抗震动等特点,可满足遥测系统小型化、模块化、系列化和标准化设计要求。 相似文献
5.
6.
阐述了行波管发射机模块化的设计思想,以及根据该思路设计的某型机载火控雷达行波管发射机。根据我们掌握的资料介绍了几种国外机载行波管发射机的模块化设计思路以及特性对比。 相似文献
7.
8.
ATCR-33K型一次雷达是由意大利Alenia公司生产的进近管制雷达。在国内使用比较广泛。其设计原理是采用功率放大型的速调管发射机发射可控脉冲.具有高稳定度、高功率的特点,对动目标的处理有很大的改善。由于该雷达发射机的功率比较高.对发射机器件的损耗也较大.因此产生的故障也比较多,其故障点主要集中在高电压、大功率的部分。该型雷达投产已超过十年,进入故障高发期。 相似文献
9.
10.
遥测发射机的高码速率实现和小型化技术 总被引:1,自引:0,他引:1
给出高码速率遥测发射机的几种实现方式。通过对目前典型的发射机小型化设计方案进行分析 ,指出其优缺点 ,并总结实现小型化的途径。 相似文献
11.
13.
14.
15.
李书玉!新疆库尔勒信箱库尔勒 《遥测遥控》2001,(3)
介绍一种新研制的超小型信标机 ,该机采用锁相环技术 ,输出信号质量高。信标机安装在氢气球悬挂的金属铝球内 ,可综合检验同一场区内的引导雷达、脉冲雷达、遥测跟踪站等设备的动态跟踪性能 ,实现测控系统的动态联调和合练。 相似文献
16.
随着雷达技术的发展,毫米波单片集成电路技术日趋成熟,小型化、轻量化、多功能的毫米波雷达在国内外得到了深入的研究和应用。为满足毫米波雷达的需求,设计了一种多通道高隔离度毫米波发射组件。采用普通FR4多层板实现电源和控制信号走线,其中功分器芯片、电容、电阻等器件装配在FR4多层板的表层;采用低损耗的Rogers 5880微波板材进行毫米波射频传输。为提高通道间和级联功放间的隔离度,进行金属隔墙处理,以获得更好的物理隔离。通过对腔体进行电磁仿真,使腔体的谐振频率高于工作频带。该组件质量仅为41 g,输出功率不低于35.5 dBm,发射效率大于16%,可应用于毫米波SAR和固态发射机等场景。 相似文献
17.
连续波雷达中频对消技术研究 总被引:4,自引:0,他引:4
为了克服连续波雷达发射信号对接收通道的严重泄漏,对中频对消技术进行了研究。给出了设计中频对消器的原理框图。实验证明,采用中频对消技术,能达到抑制发射机泄漏的目的。 相似文献
18.
19.
The traditional absolute calibration based on oscilloscopic observation is not suitable for crosslink transmitter. A new calibration algorithm is developed by using a digital signal processing technique. The output signal of crosslink transmitter and the pulse per second signal are sampled in synchronization. At first, the delay reference is determined according to straight line fitting for the signal level stepping segment. The sampling data of crosslink transmitting signal is decimated and then phase acquisition processing is made to determine the initial synchronization point. A fine search for the start of the pseudo random code has been processed between front and rear of the initial synchronization point. Finally, the transmitter delay can be obtained according to the sampling frequency and the calibration delay of the test cable and attenuator. Compared with the oscilloscopic observation method, the analysis and test results show that the proposed technique has overcome the faults caused by whole chip ambiguity and the calibration accuracy can be improved by an order of magnitude. 相似文献