太阳帆航天器研究及其关键技术综述

综述了国内外关于太阳帆航天器的研究成果。介绍了太阳帆航天器的构型与材料、姿态控制、轨道控制及任务分析、试验验证及动力学仿真分析等的研究进展,讨论了太阳帆航天器轻质高强度帆体、折叠储存与展开控制、结构设计、姿态控制、地面试验及在轨演示验证,以及测试与诊断等关键技术,分析了未来太阳帆航天器的发展趋势。     

NanoSail-D: A solar sail demonstration mission

In the early to mid-2000s, NASA made substantial progress in the development of solar sail propulsion systems. Solar sail propulsion uses the solar radiation pressure exerted by the momentum transfer of reflected photons to generate a net force on a spacecraft. To date, solar sail propulsion systems were designed for large robotic spacecraft. Recently, however, NASA has been investigating the application of solar sails for small satellite propulsion. The NanoSail-D is a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare is ready for flight and a suitable launch arrangement is being actively pursued. This paper will present an introduction solar sail propulsion systems and an overview of the NanoSail-D spacecraft.     

Evolution of the Orbit of an Earth Satellite with a Solar Sail

The efficiency of using the light pressure of solar radiation for increasing the semimajor axis of the orbit of an Earth Satellite carrying a solar sail is estimated. The orbit is nearly circular and has an altitude of about 900 km. The satellite is in the mode of single-axis solar orientation: it rotates at an angular velocity of 1 deg/s around the axis of symmetry, which traces the direction to the Sun. This mode is maintained by the solar sail, which serves in this case as a solar stabilizer. The following method of increasing the semimajor axis of the orbit (which is equivalent to increasing the total energy of the satellite's orbital motion) is considered. On those sections of the orbit, where the angle between the light pressure force acting upon the sail and the vector of geocentric velocity of the satellite does not exceed a specified limit, the sail is functioning as a solar stabilizer. On those sections of the orbit, where the above-indicated angle exceeds this limit, the sail is furled by way of turning the edges of the petals towards the Sun. Such a control increases the semimajor axis by more than 150 km for three months of flight. In this case, the accuracy of solar orientation decreases insignificantly.     

太阳帆绕地球周期轨道研究

  地球同步和太阳同步卫星在各个领域有着广泛的应用。静止轨道是一种特殊的地球同步轨道,轨道资源有限。利用化学推进或电推进可以实现轨道高度不同的同步轨道,如悬挂轨道,但需要消耗较多的燃料,工程上无法承受。本文考虑利用太阳帆实现地球同步和太阳同步轨道。太阳光压力在轨道平面内沿拱线方向,选择光压力与平面的夹角使得轨道平面的旋转速率与太阳光同步。研究表明,设计合适的半长轴和偏心率可以使得轨道旋转速率与地球自转速率一致。假设太阳光与赤道平面平行,可以得到准静止轨道,太阳帆将在传统静止轨道的附近运动,星下点的经度将在一个固定值附近振动。实际上太阳光是与黄道面平行,黄道面与赤道面之间存在夹角。考虑黄赤交角的情况下,太阳帆将在一定纬度和经度范围内运动。适合于对某个区域进行长期观测任务。     

Mission analysis and systems design of a near-term and far-term pole-sitter mission

This paper provides a detailed mission analysis and systems design of a near-term and far-term pole-sitter mission. The pole-sitter concept was previously introduced as a solution to the poor temporal resolution of polar observations from highly inclined, low Earth orbits and the poor high-latitude coverage from geostationary orbit. It considers a spacecraft that is continuously above either the north or south pole and, as such, can provide real-time, continuous and hemispherical coverage of the polar regions. Being on a non-Keplerian orbit, a continuous thrust is required to maintain the pole-sitter position. For this, two different propulsion strategies are proposed, which result in a near-term pole-sitter mission using solar electric propulsion (SEP) and a far-term pole-sitter mission where the SEP thruster is hybridized with a solar sail. For both propulsion strategies, minimum propellant pole-sitter orbits are designed. In order to maximize the spacecraft mass at the start of the operations phase of the mission, the transfer from Earth to the pole-sitter orbit is designed and optimized assuming either a Soyuz or an Ariane 5 launch. The maximized mass upon injection into the pole-sitter orbit is subsequently used in a detailed mass budget analysis that will allow for a trade-off between mission lifetime and payload mass capacity. Also, candidate payloads for a range of applications are investigated. Finally, transfers between north and south pole-sitter orbits are considered to overcome the limitations in observations due to the tilt of the Earth's rotational axis that causes the poles to be alternately situated in darkness. It will be shown that in some cases these transfers allow for propellant savings, enabling a further extension of the pole-sitter mission.     

利用太阳帆定点探测器在地一月系共线平动点附近的探讨

共线平动点附近的运动仅仅是条件稳定的,探测器的轨道需要经过控制才能维持在其附近.以地-月系11点和12点附近大振幅晕轨道的控制为例,探讨了太阳帆在定点这类探测器中的应用.首先,考虑了月球轨道的偏心率和太阳辐射的影响,给出了太阳帆对日定向的探测器轨道的低阶分析解,并在此基础上构造了在太阳系真实引力模型下一段时间内维持在共线平动点附近的拟周期轨道.然后,给出了两种利用太阳帆的控制方案,一是固定面质比而改变太阳帆法线的方向,另一是固定太阳帆对日定向而改变面质比,并对两种方案分别作了数值模拟.最后,文章探讨了测控误差及地、月影对轨道控制的影响.     

Halo轨道维持的线性周期控制策略

共线型平动点附近的Halo轨道具有指数不稳定性,轨道维持是必不可少的。推导了基于Halo轨道的误差动力学方程,并证明其一阶近似即为线性周期系统。以一次维持的作用时间为离散步长,并通过定常变换,将所得误差动力学化为线性离散定常系统;则仅需通过极点配置,即可实现Halo轨道镇定。研究结果表明,利用Halo轨道周期性设计的线性周期控制策略,可以满足轨道维持任务的需要。     

太阳帆日心定点悬浮转移轨道设计

研究了太阳帆航天器日心定点悬浮轨道(HFDO)的转移轨道设计问题,以球坐标形式建立了太阳帆的动力学模型,基于该模型给出在日心悬浮轨道基础上实现定点悬浮的条件,提出了一种实现日心定点悬浮的转移轨道设计方法。首先,确定定点悬浮的位置;然后,设计经过该位置的绕日极轨轨道;最后,实施轨道减速实现定点悬浮,并给出了解析形式的轨道控制律。结合太阳极地观测任务,设计了定点悬浮在太阳北极1AU处的太阳帆转移轨道。仿真结果表明:该轨道转移方案总耗时3.5年,太阳帆定点到黄北极距日心1AU处,此后只要保持太阳光垂直照射帆面,即可维持稳定的悬浮状态。     

太阳帆航天器移位轨道设计

研究了太阳帆日心移位轨道的稳定性、控制律设计及轨道拼接。将柱坐标形式的太阳帆动力学方程在参考移位轨道附近线性化,得到线性变分方程。分析线性变分方程的特征值在复数平面上的位置就可以得到移位轨道的稳定性条件。设计了太阳帆日心移位轨道的控制律,并证明了控制律满足稳定性条件。该控制律仅要求太阳帆在移位轨道飞行时姿态角α保持不变。此外,太阳帆移位轨道可以与开普勒轨道相互转化,也可以与移位轨道之间相互拼接。     

Single-Axis Solar Orientation of a Satellite of the Earth

The possibility of using the mode of single-axis solar orientation is considered for a satellite placed into a nearly circular orbit with an altitude of 900 km and bearing a solar sail. The satellite (together with the sail) has an axisymmetric structure, its symmetry axis being the principal central axis of the maximum moment of inertia. The center of the sail pressure lies on this axis and is displaced with respect to the satellite's center of mass. The symmetry axis of the satellite is set to the Sun so that its center of mass would be located between the Sun and the pressure center and would rotate around this axis with an angular velocity of a few degrees per second. The satellite's axis of symmetry makes a slow precession under the action of the gravitational moment and the moment of light pressure forces. Though the maximum magnitudes of these moments are comparable, the moment of the light pressure forces dominates and controls the precession in such a way that the symmetry axis orientation to the Sun remains unchanged.     

Calculation of resultant vector and principal moment of light pressure forces acting upon the spacecraft with a solar sail

Two methods of calculating the resultant vector and principal moment of light pressure forces, having an effect on a spacecraft with a composite solar sail, are compared. The first method is based on analytical formulas obtained without regard to shading of some parts of the sail by others. The second method uses a detailed geometrical model of the sail, which allows one to take such shading into account. Some part of photons falling on a sail is supposed to be reflected from it in a mirror manner, while the others are completely absorbed. The range of variation of sail orientation parameters with respect to incident solar light streams, where the first method turns out to be accurate enough, is found.     

Solar sail formation flying on an inclined Earth orbit

The versatility of solar sail propulsion can be utilized in the exploration of Earth’s magnetotail. An inclined periodic orbit with respect to ecliptic is possible for a solar sail with its orbital plane in synchronous rotation with the sun. Solar sail evolving on such an inclined orbit is free of Earth shadow. Formation flying of a cluster of sails around such an inclined periodic orbit is investigated in this paper. The solution of the first-order approximation to the linear relative motion is used to qualitatively analyze the configurations of relative orbits. Since the relative motion is unstable, active control is necessary to keep a periodic relative motion. A typical LQR method is employed to stabilize the relative motion. The design method is validated by numerical examples.     

条带式太阳帆航天器的热致结构动力学响应

本文研究条带式太阳帆在近地轨道运行进出地球阴影时的热致结构动力学响应，建立了在太阳热辐射和光压共同作用下的太阳帆结构动力学方程，采用分布传递函数法，给出了条带式太阳帆热致结构稳态振动幅频响应的计算方法。算例结果表明：热辐射冲击是引起近地轨道太阳帆结构动力学响应的主要原因，光压引起的结构响应可忽略不计；增加桅杆壁厚不能有效抑制太阳帆的热致结构动态响应；增大阻尼，减小结构的热膨胀系数能够明显减小太阳帆热致结构响应的振幅；热致结构动态响应是设计大尺寸近地轨道太阳帆必须解决的问题。本文提出的方法可为太阳帆结构设计、姿态和轨道控制提供有力的分析工具。     

Experimental Flight of a Spacecraft with Solar Sail

We analyze the prospects of launching an experimental spacecraft with a solar sail. The problems hindering the implementation of this task are discussed. The ways to solve these problems are pointed out. The feasibility of organization of a system of controlling this spacecraft with a small consumption of propellant mass is briefly investigated.     

Novel mission concepts for polar coverage: An overview of recent developments and possible future applications

The paper provides a survey of novel mission concepts for continuous, hemispheric polar observation and direct-link polar telecommunications. It is well known that these services cannot be provided by traditional platforms: geostationary satellites do not cover high-latitude regions, while low- and medium-orbit Sun-synchronous spacecraft only cover a narrow swath of the Earth at each passage. Concepts that are proposed in the literature are described, including the pole-sitter concept (in which a spacecraft is stationary above the pole), spacecraft in artificial equilibrium points in the Sun–Earth system and non-Keplerian polar Molniya orbits. Additionally, novel displaced eight-shaped orbits at Lagrangian points are presented. For many of these concepts, a continuous acceleration is required and propulsion systems include solar electric propulsion, solar sail and a hybridisation of the two. Advantages and drawbacks of each mission concept are assessed, and a comparison in terms of high-latitude coverage and distance, spacecraft mass, payload and lifetime is presented. Finally, the paper will describe a number of potential applications enabled by these concepts, focusing on polar Earth observation and telecommunications.     

Photonic spin control for solar wind electric sail

The electric solar wind sail (E-sail) is a novel, efficient propellantless propulsion concept which utilises the natural solar wind for spacecraft propulsion with the help of long centrifugally stretched charged tethers. The E-sail requires auxiliary propulsion applied to the tips of the main tethers for creating the initial angular momentum and possibly for modifying the spinrate later during flight to counteract the orbital Coriolis effect and possibly for mission specific reasons. We introduce the possibility of implementing the required auxiliary propulsion by small photonic blades (small radiation pressure solar sails). The blades would be stretched centrifugally. We look into two concepts, one with and one without auxiliary tethers. The use of small photonic sails has the benefit of providing sufficient spin modification capability for any E-sail mission while keeping the technology fully propellantless. We conclude that small photonic sails appear to be a feasible and attractive solution to E-sail spinrate control.     

Fast solar sail rendezvous mission to near Earth asteroids

The concept of fast solar sail rendezvous missions to near Earth asteroids is presented by considering the hyperbolic launch excess velocity as a design parameter. After introducing an initial constraint on the hyperbolic excess velocity, a time optimal control framework is derived and solved by using an indirect method. The coplanar circular orbit rendezvous scenario is investigated first to evaluate the variational trend of the transfer time with respect to different hyperbolic excess velocities and solar sail characteristic accelerations. The influence of the asteroid orbital inclination and eccentricity on the transfer time is studied in a parametric way. The optimal direction and magnitude of the hyperbolic excess velocity are identified via numerical simulations. The found results for coplanar circular scenarios are compared in terms of fuel consumption to the corresponding bi-impulsive transfer of the same flight time, but without using a solar sail. The fuel consumption tradeoff between the required hyperbolic excess velocity and the achievable flight time is discussed. The required total launch mass for a particular solar sail is derived in analytical form. A practical mission application is proposed to rendezvous with the asteroid 99942 Apophis by using a solar sail in combination with the provided hyperbolic excess velocity.     

IKAROS太阳帆的关键技术分析与启示

分析了国外太阳帆的发展现状,重点论述了世界上首次成功飞行的太阳帆——太阳辐射驱动星际风筝航天器（IKAROS）的总体设计、材料设计、空间展开和姿态控制等关键技术,以及中国开展太阳帆和空间大型展开结构的总体设计、空间展开、姿态控制、空间环境适应性等关键技术,提出了系统开展以太阳帆为代表的大型轻质展开结构研制与应用的建议。     

空间太阳能阵列光照的建模仿真及优化

针对空间救援飞行器在无控模式下，固定的太阳能阵列可能受到光线照射面积不足的问题，提出采用建模仿真及优化阵列布局的方法来提高任意光照角度下的受光面积。通过建立参数化驱动的空间飞行器外形几何模型、任意角度下的光线投射模型和考虑自身结构阴影遮挡的光照模型，研究空间任意光照角度下太阳能阵列接收光线照射的有效面积，并得到最低受光面积。基于建立的光照模型，采用遗传算法，对影响太阳能阵列布局的关键参数进行优化。可视化仿真结果校验了模型的有效性，优化结果显示算法收敛且获得了最优结果，满足空间无控飞行任务要求。     

The Use of Quaternions in the Optimal Control Problems of Motion of the Center of Mass of a Spacecraft in a Newtonian Gravitational Field: I

The problem of optimal control is considered for the motion of the center of mass of a spacecraft in a central Newtonian gravitational field. For solving the problem, two variants of the equations of motion for the spacecraft center of mass are used, written in rotating coordinate systems. Both the variants have a quaternion variable among the phase variables. In the first variant this variable characterizes the orientation of an instantaneous orbit of the spacecraft and (simultaneously) the spacecraft location in this orbit, while in the second variant only the instantaneous orbit orientation is specified by it. The suggested equations are convenient in the respect that they allow the general three-dimensional problem of optimal control by the motion of the spacecraft center of mass to be considered as a composition of two interrelated problems. In the first variant these problems are (1) the problem of control of the shape and size of the spacecraft orbit and (2) the problem of control of the orientation of a spacecraft orbit and the spacecraft location in this orbit. The second variant treats (1) the problem of control of the shape and size of the spacecraft orbit and the orbit location of the spacecraft and (2) the problem of control of the orientation of the spacecraft orbit. The use of quaternion variables makes this consideration most efficient. The problem of optimal control is solved on the basis of the maximum principle. Several first integrals of the systems of equations of the boundary value problems of the maximum principle are found. Transformations are suggested that reduce the dimensions of the systems of differential equations of boundary value problems (without complicating them). Geometrical interpretations are given to the transformations and first integrals. The relation of the vectorial first integral of one of the derived systems of equations (which is an analog of the well-known vectorial first integral of the studied problem of optimal control) with the found quaternion first integral is considered. In this paper, which is the first part of the work, we consider the models of motion of the spacecraft center of mass that employ quaternion variables. The problem of optimal control by the motion of the spacecraft center of mass is investigated on the basis of the first variant of equations of motion. An example of a numerical solution of the problem is given.